Overall Score 7.2 Represents average audio ecosystem compatibility score.
Overall Score 6.4 Represents average audio ecosystem compatibility score.
Category | Features | Anker Soundcore Liberty 3 Pro | JEET W1S |
---|---|---|---|
DESIGN | ingress protection (ip) rating | ipX4 | ipX5 |
weight | 12g | 18g | |
has no wires or cables | ✓ | ✗ | |
wingtips included | ✓ | ✓ | |
sweat resistance | ✓ | ✓ | |
has stereo speakers | ✓ | ✓ | |
SOUND QUALITY | has active noise cancellation (noise control) | ✓ | ✗ |
has passive noise reduction | ✓ | ✓ | |
driver unit size | 10.6mm | 11mm | |
lowest frequency | 20hz | 20hz | |
highest frequency | 40,000hz | 20,000hz | |
sound pressure level | 92db/mw | 93db/mw | |
POWER | battery life | 8hours | 11hours |
battery life of charging case | 24hours | ✗ | |
charge time | 2hours | ✗ | |
has wireless charging | ✓ | ✗ | |
has a battery level indicator | ✓ | ✓ | |
CONNECTIVITY | has usb type-c | ✓ | ✗ |
bluetooth version | v5.2 | v4.1 | |
maximum bluetooth range | 10meters | 10meters | |
has aac | ✓ | ✓ | |
has ldac | ✓ | ✓ | |
has aptx adaptive | ✗ | ✓ | |
has aptx low latency | ✗ | ✓ | |
has aptx hd | ✗ | ✓ | |
audio latency | ✗ | 88ms | |
MICROPHONE | number of microphones | 6only | 1only |
has a noise-canceling microphone | ✓ | ✗ | |
EXTRAS | has ambient sound mode | ✓ | ✓ |
has in/on-ear detection | ✓ | ✓ | |
has find earbuds feature | ✓ | ✓ | |
supports fast charging | ✓ | ✓ | |
multipoint count | 2only | ✗ | |
has a mute function | ✓ | ✓ | |
control panel placed on a device | ✓ | ✓ | |
warranty period | 1years | 1years | |
has voice prompts | ✓ | ✓ | |
travel bag is included | ✓ | ✓ | |
See price on Amazon | See price on Amazon |
Ingress protection ratings refer to the rating of protection given by a casing, against dust and liquids. The letters 'IP' are followed by two values The first value of the IP rating means protection against solids say dust, while the second refers to resistance against liquids (sweat).
Scoring IPX4, the Anker Soundcore Liberty 3 Pro's rating is read as, the first value of X denotes that no data available to specify a protection rating, and of liquids that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes.
Compared to the Anker Soundcore Liberty 3 Pro, JEET W1S have a rating of IPX5 meaning that
we are not yet certain of their rating with solids (dust)
and that of liquids is that,
Anker Soundcore Liberty 3 Pro has a lower liquid rating than JEET W1S
The Anker Soundcore Liberty 3 Pro have a weight of 12g . We prefer a lower weight better because lighter devices are easier to transport.
JEET W1S, at 18g
are heavier than the Anker Soundcore Liberty 3 Pro by of 6g
True wireless devices have no wires connecting any part of the device together, Anker Soundcore Liberty 3 Pro are true wireless for this case since they have no wires. This is a key difference since wireless earbuds have cables linking the pair of earbuds .
Anker Soundcore Liberty 3 Pro have wingtips, these are reserved for earbuds for workouts and come as an optional add-on to each silicone ear tip for a better fit.
JEET W1S too have wingtips, by resting against the triangular fossa and form a secure fit to combat vigorous movement, they are best suited for sports and other physical activities. When used as directed, they secure the earbuds from falling off.
Anker Soundcore Liberty 3 Pro are resistant to sweat
JEET W1S's resistance to sweat makes both devices fit for use during long-distance running, marathons, training in workout bodysuits, etc
Anker Soundcore Liberty 3 Pro have stereo speakers, devices with stereo speakers deliver sound from independent channels on both left and right sides, this creates a richer sound and a better listening experience.
The JEET W1S also have stereo speakers
Active noise cancellation utilises advanced technology to actively cancel noise. How it works, it listens to the sound pattern of incoming noise and after inverts the soundwaves to counter it. Simply put, it's like taking +1 (sound from your surrounding) and adding -1 (inverted noise) to make zero which results in a reduced level of noise.
Anker Soundcore Liberty 3 Pro have Active Noise Cancellation allowing you to listen at lower levels of volume, good for your ears as you don't have to crank up the device volume to outcompete background sounds.
Anker Soundcore Liberty 3 Pro stay well in place, creating a sound covering that reduces background noise and also prevents the device voice audio from leaking out .
Both of these devices have passive noise reduction which implies that they limit ambient noise instead of actively using technology to cancel it out.
Anker Soundcore Liberty 3 Pro driver unit is 10.6mm in diameter, the bigger the unit the more powerful, and can produce better bass.
A driver unit is basically a mini speaker that produces sound in the device, the unit size dictates the sound produced by the earbuds.
JEET W1S driver unit is 11mm in diameter,
making them have a larger driver unit than that of Anker Soundcore Liberty 3 Pro by 0.4mm
, as many tend to believe that driver units of a bigger size automatically produce better sound quality.
However, large drivers usually have difficulty producing high frequencies so yes, larger drivers can generate louder sound, but this does not imply that they deliver better quality sound.
Anker Soundcore Liberty 3 Pro's lowest frequency is at 20Hz, low-frequency response measures if and how well an audio device produces low frequencies that can be heard, and if it makes any changes to the signal while at it.
JEET W1S's lowest frequency is at 20Hz, this implies that
both devices can make sound with equal bass
The Anker Soundcore Liberty 3 Pro's highest frequency is at 40,000Hz, high-frequency response tells how well a particular audio component makes high human frequencies and if it makes any changes to the signal on its way through.
JEET W1S's highest frequency is at 20,000Hz, this means that
Anker Soundcore Liberty 3 Pro produce a clearer and crispier treble than the JEET W1S
The sound pressure level, is the level of pressure of sound, measured in decibels, dB, Anker Soundcore Liberty 3 Pro's measurement is 92dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
JEET W1S's sound pressure level measurement is 93dB/mW. How loud a device is can be taken differently by different people, so we need to have the means to get an objective measurement of sound level expressed in numerical terms.
The Anker Soundcore Liberty 3 Pro's battery life is 8 hours, these last longer than 5 hours of listening which is considered average for a single charge. A device's battery life is usually given by the manufacturer, and with longer battery life, you get to use it for longer and have to charge the device less often.
JEET W1S's battery life is
more than that of Anker Soundcore Liberty 3 Pro by 3 hours
. Every time you recharge your device, they get a little less listening time. The effect is barely noticeable at first, but over a few years, your wireless earbuds will have shorter listening time.
This is given by the manufacturer, and Anker Soundcore Liberty 3 Pro's case has a charge of 24 hours. A charging case with more battery hours allows you to recharge your earbuds on the go many times before having to recharge the case itself.
It requires 2 hours to fully charge the Anker Soundcore Liberty 3 Pro's battery. It is recommended to fully charge the battery before using the earbuds for the first time.
The Anker Soundcore Liberty 3 Pro, the device supports wireless charging. To charge the device, you just put down on a compatible charging pad.
Anker Soundcore Liberty 3 Pro have a battery level indicator, an indicator notifies you when the device has a low battery. The battery indicator lights indicate the charging state of your earbuds and charging case.
JEET W1S too have a battery level indicator, these allow you to determine the charging state of your device, if charged fully, or having a low battery.
The Anker Soundcore Liberty 3 Pro support USB TYPE-C, a standard connector for transmitting both data and power through a single cable.
Anker Soundcore Liberty 3 Pro have Bluetooth version of 5.2, Bluetooth is a wireless technology standard that allows data transfers between devices placed in range, using short-wavelength, ultra-high frequency radio waves.
JEET W1S has a Bluetooth version of 4.1,
older than that of Anker Soundcore Liberty 3 Pro
. Newer versions provide faster data transfers.
The Anker Soundcore Liberty 3 Pro have a 10meters distance connecting via Bluetooth.
JEET W1S have a maximum range of 10meters,
equal to that of the Anker Soundcore Liberty 3 Pro
Anker Soundcore Liberty 3 Pro support AAC, a codec used for Bluetooth audio. It supports 24-bit audio at 250kbps. Because it uses psychoacoustic modeling, it can provide better results than other codecs at the same bit rate.
Since its the highest quality codec that any Bluetooth-supporting Apple product supports, the Anker Soundcore Liberty 3 Pro will work well with your iPhone. If you are planning on using these with Android , ensure that they also support aptX HD, LDAC, or LHDC as well.
The JEET W1S support AAC as well. Designed to be the successor of the MP3 format, AAC generally achieves higher sound quality than MP3 encoders at the same bit rate.
Anker Soundcore Liberty 3 Pro support LDAC, a codec developed by Sony
which allows streaming high-resolution audio over Bluetooth connections at up to 990 kbps at 32 bit/96 kHz.
It is capable of a very high bitrate of 990kbps, which provides high-resolution audio.
JEET W1S support it as well, LDAC, can automatically change to a lower bitrate of 330kbps or 660kbps for stability.
JEET W1S support APTX Adaptive, an audio codec for Bluetooth devices that are developed by Qualcomm. It has a variable bit rate (between 279kbps and 420kbps).
JEET W1S support APTX Low Latency, a codec developed by Qualcomm. It uses Bluetooth 5.0 technology to provide low latency audio (around 40ms), which is useful when you want to avoid audio lag for example when playing games.
The JEET W1S support APTX HD, an audio codec for Bluetooth devices that are developed by Qualcomm. It supports high-quality 24-bit audio (at a bit rate of 576kbps).
Latency refers to the time it takes for the audio signal to be transmitted to your earbuds. JEET W1S have a latency of 88ms, a lower latency reduces audio lag and is particularly important when playing games or watching videos.
The Anker Soundcore Liberty 3 Pro have 6 microphones.
JEET W1S microphones are 1,
less than that of Anker Soundcore Liberty 3 Pro by 5
. More microphones record better sound quality and enable the earbuds to filter out noise.
The Anker Soundcore Liberty 3 Pro have a noise-canceling type of microphone, these microphones are designed to reduce noise from the earbuds' sound.
Anker Soundcore Liberty 3 Pro support ambient sound mode, which uses microphones to pass through ambient noises to still be heard even while wearing the earbuds
The JEET W1S support ambient sound mode as well, helpful when you want to listen to music while being aware of what’s happening around you, for example when you’re having a run but still want to hear traffic.
The Anker Soundcore Liberty 3 Pro have in/on-ear detection, the sensors in the device can detect when removed from your ears so that the music is paused.
JEET W1S support in/on-ear detection, automatically pauses your music, or audiobook when you remove earbuds from your ears improving your listening experience.
When lost in a room, or can't be found in your bag, the Anker Soundcore Liberty 3 Pro have a find earbuds feature.
The JEET W1S also have the find earbuds feature. Simply use the earbuds app on your smartphone to play a sound from your earbuds to help you locate them.
The Anker Soundcore Liberty 3 Pro support fast charging. Usually, technologies like Qualcomm’s Quick Charge, are used to lower the amount of time it takes to fully charge a device.
Also the JEET W1S support fast charging. It's very similar to regular charging, just that the battery is filling up much faster. Say, with Quick Charge 3.0, the battery can be charged to 50% in just 30 minutes.
Anker Soundcore Liberty 3 Pro support multipoint of 2 connections, the multipoint feature allows you connect to more than one Bluetooth device and switch between them. For example, you can switch calls from one device to another without having to manually disconnect and reconnect.
The Anker Soundcore Liberty 3 Pro have a mute function, they support the feature to mute/unmute a conversation directly from the earbuds.
The JEET W1S also have the mute function. It means that you can turn off the device's microphone, but you can still hear the other party's voice.
The Anker Soundcore Liberty 3 Pro, so you can access the volume control, pause, play, mute, etc whichever features are supported on the device.
JEET W1S too have a control panel on them.
The Anker Soundcore Liberty 3 Pro have a warranty period of 1 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use that has followed instruction manuals.
When covered under the manufacturer’s warranty it is possible to get a replacement a malfunction occurs. JEET W1S have a warranty period of 1Years,
equal to that of the Anker Soundcore Liberty 3 Pro
.
The Anker Soundcore Liberty 3 Pro have voice prompts. With voice prompts, you receive information through audio messages, like if there is an issue with the connection.
JEET W1S too support voice prompts .i.e the earbuds will notify you if the battery is low, and it's time to recharge them.
The Anker Soundcore Liberty 3 Pro come with their own special case. Carrying earphones openly, or placing them in your pockets without a casing can easily put them at risk of getting damaged.
JEET W1S also have a travel bag included, which is useful for safe transportation.