IP ratings refer to the level of protection given by a casing, against solids and water. The letters 'IP' are followed by two values The first value of the IP rating refers to protection against solids say dust, while the second refers to resistance against liquids (water).
Scoring IPX4, the Apple AirPods (3rd Gen)'s rating for solids indicates that no data available to specify a protection rating, and the second number of 4 means that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes. Apple AirPods (3rd Gen) have a weight of 8.56g . We prefer a lower weight best because lighter devices are easier to carry.
For a device to be true wireless it should have no cables linking any part of the device together, Apple AirPods (3rd Gen) are true wireless for this matter since they have no cables. This is an important distinction since wireless earbuds have wires linking the pair of earbuds .
Apple AirPods (3rd Gen) are resistant to sweat
Apple AirPods (3rd Gen) have stereo speakers, what this means is that Apple AirPods (3rd Gen)'s speakers deliver sound from separate channels on both left and right sides, this creates a richer sound and a better listening experience. ANC makes use of more advanced kind of tech to reduce ambient sounds.
How it works, it listens to the sound pattern outside and inside the earbud and generates a mirror signal to counter it. Simply put, it's like taking +1 (noise) then producing -1 (counter sound by the device) giving zero which results in a reduced level of noise.
Apple AirPods (3rd Gen) have ANC enabling you to listen at lower volume levels, causing less ear fatigue since you don't have to crank up the earbuds volume to overcome background sounds.
Apple AirPods (3rd Gen) stay well in place, this creates an acoustic covering that reduces background sounds and also prevents the device music from leaking out .
Apple AirPods (3rd Gen) have a unit size of 11mm in diameter, bigger drivers are more powerful, and can produce better bass. The driver unit is the component that makes sound in the earbuds, the unit size corellates with the loudness of the earbuds. Apple AirPods (3rd Gen)'s lowest frequency is at 10Hz, low-frequency response inidcates how well a particular audio component produces low audible frequencies and if it makes any changes to the signal on its way through.
Apple AirPods (3rd Gen)'s highest frequency is at 20,000Hz, high-frequency response tells how well a particular audio component makes high human frequencies and if it adjustments to the signal while at it. Apple AirPods (3rd Gen)'s battery life is 6 hours, these last longer than 5 hours of listening which is considered average before recharge. A device's battery life is given by the manufacturer, and with longer battery life, you get to use it for longer and requires fewer chargings.
The battery life of the charging case is given by the manufacturer, and the Apple AirPods (3rd Gen)'s case is said to have a charge of 30 hours. A charging case with a longer battery life enables you to recharge your earbuds on the go multiple times before having to recharge the case itself. It takes 0.3 hours to fully charge the Apple AirPods (3rd Gen)'s battery.
It is recommended to fully charge the battery before using the earbuds for the first time. Apple AirPods (3rd Gen), the device supports wireless charging. To charge the earbuds, you simply put down on a supported charging pad.
Apple AirPods (3rd Gen) have a battery level indicator, an indicator shows you when the device has a low battery. The battery indicator lights indicate the charging state of your earbuds and charging case. The Apple AirPods (3rd Gen) have Bluetooth version of 5, Bluetooth is a wireless technology standard that enables data movement between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves.
Apple AirPods (3rd Gen) have a 10meters distance to connect via Bluetooth. Apple AirPods (3rd Gen) support AAC, a codec that is used for Bluetooth audio. It supports 24-bit audio at 250kbps.
Since it uses psychoacoustic modeling, it provides better results than other codecs at the same bit rate.
Being the highest quality codec that any Bluetooth-supporting Apple product supports, the Apple AirPods (3rd Gen) will work fine with your iPad. If you intend on using these with Android you need to pay even closer attention to codec support for if they only have AAC they won't provide the best audio quality possible, ensure that they also support aptX HD, LDAC, or LHDC as well.
The Apple AirPods (3rd Gen) have 6 microphones. The Apple AirPods (3rd Gen) have a noise-canceling microphone, these microphones are made to filter out noise from the desired sound. The Apple AirPods (3rd Gen) support in/on-ear detection, the sensors in the device can detect when they are removed from your ears so that the music is paused.
If misplaced in a room, or can't be found in your bag, the Apple AirPods (3rd Gen) support the find earbuds feature. Apple AirPods (3rd Gen) support fast charging. Commonly, technologies like MediaTek’s Pump Express, are used to reduce the amount of time it takes to fully charge a device.
The Apple AirPods (3rd Gen) support multipoint of 2 connections, this feature allows you connect to more than one Bluetooth device and switch between them. For example, you can easily switch calls from one device to another without manually disconnect and reconnect. Apple AirPods (3rd Gen) have a mute function, they support the option to mute/unmute a conversation directly from the earbuds.
With the Apple AirPods (3rd Gen), so you can access the volume control, pause, play, mute, etc whichever functions are supported on the device. The Apple AirPods (3rd Gen) have a warranty period of 1 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use following instruction manuals. Apple AirPods (3rd Gen) support voice prompts.
With voice prompts, you receive information through audio messages, like if there is an issue with the connection. The Apple AirPods (3rd Gen) come with a special case. Carrying earbuds without a case, or placing them in your pockets without a cover can easily put them at risk of getting damaged.
