Audio Technica ATH ANC900BTSee price on Amazon
Overall Score 5 Represents average audio ecosystem compatibility score.
Sennheiser HD 560SSee price on Amazon
Overall Score 2.4 Represents average audio ecosystem compatibility score.
Audio Technica ATH ANC900BT have a weight of 263g, these weigh below 320g, which we consider as the highest average a headphone should weigh for comfort during long use.
We consider a lower weight best because lighter devices are more comfortable to move with.
Sennheiser HD 560S, at 240g are lighter than the Audio Technica ATH ANC900BT by -23g
Detachable cables are cables that have connectors on both ends. One end goes into your headphone cups, while the other end is inserted into a source device. Some new headphones, and not just the expensive ones, are coming with detachable cables, Audio Technica ATH ANC900BT are one of those.
With a detachable cable, Sennheiser HD 560S too can use alternative cables and if the cable is pulled, it will pop out instead of breaking.
Audio Technica ATH ANC900BT are foldable, which makes them more portable. Foldable headphones are easier to transport and take up less storage space.
Twisted headphone cables can be a great source of annoyance and inconvenience, Sennheiser HD 560S's cable is designed to minimize tangling. Constant twisting of the cables can also lead to microfractures in the copper wires, affecting sound quality, or completely damaging your headphones.
Headphones that are designed to allow air to pass through their ear cups from the rear of the speaker driver unit are known as open-back. This design provides a very natural and accurate sound, Sennheiser HD 560S have this kind of design which means that resonances and low-frequency that tend to build up caused by the rear enclosure are no longer a concern.
A long cable ensures more freedom of movement, but remember that every cable based on the conducting material used has a certain amount of parasitic resistance, inductance, and capacitance. How much depends on the length and construction. Audio Technica ATH ANC900BT comes with a 1.2meters cable.
Sennheiser HD 560S comes with a 3meters cable. Almost any cable should be fine in sound quality If you're looking at lengths up to 2 - 3 meters.
Over-ear headphones have larger earpads that fit around your entire ear Audio Technica ATH ANC900BT have a comfortable full-size form with earcups that fully enclose your ears. This design is loved for its increased sound isolation and the fact that it won't leak sound to your neighbors.
Sennheiser HD 560S with this design offer potential for maximum bass and loudness levels.
Audio Technica ATH ANC900BT have stereo speakers, devices with stereo speakers deliver sound from separate channels on both left and right sides, creating a richer sound and a better listening experience.
The Sennheiser HD 560S also have stereo speakers
Active noise cancellation uses more advanced technology to reduce unwanted ambient sounds. How it works, it listens to the sound pattern of incoming noise and then generates a mirror signal to cancel it out. In simple terms, it's like taking +1 outside (noise from your surrounding) and adding -1 inside (counter sound within the device) to make 0 hence "diluting" the noise.
Audio Technica ATH ANC900BT allow you to listen at lower volume levels, causing less ear fatigue as you don't have to crank up the volume to overcome background noise.
Passive Noise Cancellation uses well-designed ear cups to seal out environment noise. This is used for both in-ear earphones and over-ear headphones where the headphone itself will keep surrounding noise out. The Sennheiser HD 560S sits tightly in place, creating an acoustic seal that reduces background noise and prevents your music from leaking out.
Low-frequency response measures if and how well a particular audio device reproduces low audible frequencies and if it makes any changes to the signal while at it. Audio Technica ATH ANC900BT's lowest frequency is at 5Hz, the lower the low-frequency response, the stronger and juicier the bass.
Sennheiser HD 560S's lowest frequency is at 6Hz, this implies that Sennheiser HD 560S got a juicier bass than the Audio Technica ATH ANC900BT
High frequency response measures if and how well an audio component reproduces high audible frequencies and if it makes any changes to the signal on the way through. Audio Technica ATH ANC900BT's highest frequency is at 40000Hz, the higher the high-frequency response, the clearer and crispier the treble.
Sennheiser HD 560S's highest frequency is at 38000Hz, this means that Audio Technica ATH ANC900BT got a clearer and crispier treble than the Sennheiser HD 560S
Sound pressure is the average variation in atmospheric pressure caused by the sound, the sound level .i.e how loud something is can be perceived differently by different people so we need to have a way of getting an objective measurement of sound level expressed in numerical terms.
The sound pressure level, SPL, is the pressure level of a sound, measured in decibels, dB, Audio Technica ATH ANC900BT's measurement is 103dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
Sennheiser HD 560S's sound pressure level measurement is 110dB/mW.
The driver unit is the component that produces sound in the device, its size dictates the loudness of the headphone. Audio Technica ATH ANC900BT driver unit is 40mm in diameter, bigger drivers are more powerful and can produce better bass.
Sennheiser HD 560S driver unit is 38mm in diameter, which means that they have a smaller driver unit than that of Audio Technica ATH ANC900BT by 2mm , as many tend to believe that driver units of a bigger size automatically produce better sound quality.
However, large drivers usually have difficulty reproducing high frequencies so yes, larger drivers can generate louder sound, but this does not mean that they deliver better sound.
Impedance is the device's resistance to the electromagnetic current, as electricity flows through a wire, it experiences electrical resistance that counters the flow of current. The resistance of a wire is measured in ohms. Audio Technica ATH ANC900BT's impedance is 35Ohms, the lower the impedance, the easier it is to get higher volume and requires less power.
Sennheiser HD 560S's impedance is 120Ohms. The impedance of earbuds is the electrical resistance of the driver unit present on the inside.
If your headphones play wirelessly, cancel ambient noise, or enhance your listening experience with active features, their battery life will reduce over time. The device's battery life is given by the manufacturer, with longer battery life, you get to use it for longer and have to charge the device less often. Audio Technica ATH ANC900BT's battery life is 35 hours
It takes 5.5 hours to fully charge the Audio Technica ATH ANC900BT's battery. It is recommended to fully charge the battery before using the headphones for the first time or when they have been unused for extended periods.
Audio Technica ATH ANC900BT have a battery level indicator, an indicator shows you when the device has a low battery. The battery indicator lights indicate the charging status of your headphones.
A rechargeable battery is a type of electrical battery that can be charged, discharged into a load, and recharged many times, as opposed to a disposable or primary battery, which is supplied fully charged and discarded after use. Audio Technica ATH ANC900BT's battery can be recharged and used over again.
Audio Technica ATH ANC900BT can be used wirelessly, wireless devices allow users more freedom of movement.
Bluetooth is a wireless technology standard that allows data transfers between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves. Audio Technica ATH ANC900BT has a v5
Audio Technica ATH ANC900BT support APTX, a codec used for transmitting audio wirelessly with Bluetooth. It is developed by Qualcomm and supports 16-bit audio at a bit rate of 384kbps.
Bluetooth is a short-range wireless technology standard that is used for exchanging data between fixed and mobile devices over short distances. The Audio Technica ATH ANC900BT can connect at a 10meters distance via Bluetooth or infrared to another device.
Being an industry standard audio plug, a standard 3.5mm male connector is suitable for use with all MP3 players and computer sound cards. This means that it is commonly used in stereo headphones to your phone or connecting your phone to an external amplifier, sound bars, your car radio, etc.
Audio Technica ATH ANC900BT has this connector giving it a wider range of connectivity with most of the sound devices out there. All plugs have at least a tip and sleeve with the number of rings that stand as a differentiating factor.
Sennheiser HD 560S too have this kind of connector
Audio Technica ATH ANC900BT have only 1 microphones, more microphones result in better sound quality and enable the device to filter out background noise.
Audio Technica ATH ANC900BT use a noise-canceling type of microphone, these microphones are designed to filter out background noise from the desired sound. Especially useful in noisy environments.
The magnitude of the analog or digital output signal from the microphone with that input stimulus is a measure of its sensitivity. Microphone sensitivity is a measurement of a microphone's efficiency as a transducer (how well it converts acoustical energy to electrical energy). Audio Technica ATH ANC900BT microphone sensitivity is measured at -44dBV/Pa
The highest mic frequency of a microphone is defined as its upper limiting frequency. With today's microphones, you can reach a frequency high reaching up to 140 kHz. Audio Technica ATH ANC900BT's highest mic frequency is 4000Hz, the highest frequency that the mic can pick up. Better for recording treble.
The lowest mic frequency of a microphone is defined as its lower limiting frequency. With today's microphones, you can have a frequency starting from around 1Hz. Audio Technica ATH ANC900BT's lowest mic frequency is 50Hz, the lowest frequency that the mic can pick up. Better for recording bass.
There is a control panel on the Audio Technica ATH ANC900BT body, so you can easily access the volume control or remote without having to interact with a cable or another device it's connected to.
Audio Technica ATH ANC900BT can be used as a headset. A headset is one headphone or pair with a built-in microphone. Headsets can be used for apps that require communication i.e. Zoom, Google Meet, Skype, games with voice chat, mobile phones, etc.
Carrying headphones without a case, or putting them in bags without a casing can easily put them at risk of getting damaged. The Audio Technica ATH ANC900BT come with their own special case or pouch, which is useful for safe transportation.