JLab Go Air
See price on AmazonOverall Score 5.3 Represents average audio ecosystem compatibility score.
IP ratings is the rating of protection given by an enclosure, against solids and liquids. The letters 'IP' are followed by two values The first value of the IP rating means protection against solids say dust, while the second refers to protection against liquids (water).
Scoring IP44, the JLab Go Air's rating is read as, the first value of 4 denotes that they are protected against objects greater than 1.0mm such as wire, and of liquids that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes.
The JLab Go Air have a weight of 10g . We consider a lower weight better for the reason that lighter devices are easier to transport.
For a device to be true wireless it must have no cables linking any part of the device together, JLab Go Air are true wireless for this case since they have no wires. This is a major difference as some wireless earbuds have wires linking the two earbuds .
JLab Go Air are resistant to sweat
JLab Go Air have stereo speakers, devices with stereo speakers deliver sound from independent channels on both left and right sides, this creates a richer sound and a better listening experience.
The JLab Go Air stay tightly in place, this creates an acoustic seal that reduces your environment sounds while preventing the earbuds music from leaking out at the same.
JLab Go Air driver unit is 8mm in diameter, the bigger the unit the more powerful, therefor producing better bass. A driver unit is the component that makes sound in the device, its size determines the loudness of the device.
The JLab Go Air's lowest frequency is at 20Hz, low-frequency response measures if and how well a particular audio component generates low recognizable frequencies and if it alters the signal while at it.
JLab Go Air's highest frequency is at 20,000Hz, high-frequency response tells how well an audio device produces high recognizable frequencies and if it adjustments to the signal while at it.
SPL, is the pressure level of sound, in decibels, dB, JLab Go Air's measurement is 103dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
JLab Go Air's battery life is 5 hours, these last less than 5 hours of listening which is considered average for a single charge. A device's battery life is given by the manufacturer, and with longer battery life, you get to use it for longer and requires fewer chargings.
This is given by the vendor, and the JLab Go Air's case has a full charge of 15 hours. A charging case with a longer battery life allows you to recharge your earbuds on the go several times before having to recharge the case itself.
It requires 1.5 hours to fully charge the JLab Go Air's battery. It is highly adivsable to charge fully the battery before using the earbuds for the first time.
JLab Go Air have a battery level indicator, an indicator alerts you when the device has a low battery. Its lights indicate the charging status of your earbuds and charging case.
The JLab Go Air have Bluetooth version of 5, Bluetooth is a wireless technology standard that enables data transfers between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves.
The JLab Go Air have a 10meters distance connecting via Bluetooth.
The JLab Go Air have 2 microphones.
JLab Go Air microphone sensitivity is measured at -38dBV/Pa. The amount of the analog or digital output signal from the microphone with its input stimulus is a measure of its sensitivity. It's the 'loudness' of the voice that the microphone can recognize.
With the JLab Go Air, so you can access the volume control, pause, play, mute, etc whichever functions are supported on the earbuds.
JLab Go Air have a warranty period of 2 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use following instruction manuals.
The JLab Go Air have voice prompts. Automatically receive information via audio messages, like if there is an issue with the connection.