Has Stereo Speakers
Sony SRS XE300
✓
Bang & Olufsen Beolit 20 ✓
Bang & Olufsen Beolit 20 has stereo speakers, what this means is that Bang & Olufsen Beolit 20's speakers deliver sound from separate channels on both left and right sides, this creates a richer sound and a better listening experience.
Both Sony SRS XE300 and Bang & Olufsen Beolit 20 have stereo speakers
Driver Unit Size
Sony SRS XE300
71mm
Bang & Olufsen Beolit 20 140mm
The driver unit is the component that produces sound in the device, its size dictates the loudness of the headphone. Bang & Olufsen Beolit 20 driver unit is 140mm in diameter, bigger drivers are more powerful and can produce better bass.
Sony SRS XE300 driver unit is 71mm in diameter,
which means that they have a smaller driver unit than that of Bang & Olufsen Beolit 20 by 69mm
, as many tend to believe that driver units of a bigger size automatically produce better sound quality.
However, large drivers usually have difficulty reproducing high frequencies so it's true that, larger drivers can generate louder sound, but this does not mean that they produce better sound.
Drivers Count
Sony SRS XE300
2only
Bang & Olufsen Beolit 20 4only
A speaker driver is an individual transducer that converts electrical energy to sound waves. Drivers come in different sizes and modes, but generally, you'll find three types: tweeter driver, which handles the high-frequency treble range (above 2,000 Hz), and midrange driver: which handles the midrange frequencies (200 Hz to 2,000 Hz). Woofer driver: handles the low-frequency bass range (below 200 Hz).
Based on the frequencies they handle more drivers may result in better sound quality, Bang & Olufsen Beolit 20 has 4 only.
Sony SRS XE300 has 2 only
Has A Passive Radiator
Sony SRS XE300
✓
Bang & Olufsen Beolit 20 ✓
A passive radiator is a type of driver in speakers that can get extra power and resonance from a speaker system, usually used in smaller speaker systems. This radiator is called passive because it is not powered by electricity but by air pressure found in speaker cones.
The sound vibrations produced by a passive radiator depend on its mass and the size of its enclosure. It is usually used in combination with a woofer to produce deep, resonant tones that would normally be produced by speakers in large boxes powered by AC.
The Sony SRS XE300 and Bang & Olufsen Beolit 20 both have a passive radiator
Lowest Frequency
Sony SRS XE300
20Hz
Bang & Olufsen Beolit 20 37Hz
Low-frequency response measures if and how well an audio component reproduces low audible frequencies and if it makes any changes to the signal while at it. Bang & Olufsen Beolit 20's lowest frequency is at 37Hz, the lower the low-frequency response, the stronger and juicier the bass.
Sony SRS XE300's lowest frequency is at 20Hz, this implies that
Bang & Olufsen Beolit 20 got a juicier bass than the Sony SRS XE300
Highest Frequency
Sony SRS XE300
20,000Hz
Bang & Olufsen Beolit 20 20,000Hz
High frequency response measures if and how well an audio device reproduces high audible frequencies and if it makes any changes to the signal while at it. Bang & Olufsen Beolit 20's highest frequency is at 20,000Hz, the higher the high-frequency response, the clearer and crispier the treble.
Sony SRS XE300's highest frequency is at 20,000Hz, this implies that
both devices produce equal treble
Turtlebox Gen 2 Vs. Bang & Olufsen Beolit 20 Review
Bang & Olufsen Beolit 20 Vs. Jbl Pulse 5 Review
