Ingress protection ratings is the rank of protection offered by a casing, against solids and water. The letters 'IP' are followed by two values The first value of the IP rating refers to protection against solids such as dust, followed by the one that refers to resistance against liquids (water).
Having a value of IP57, the Bang & Olufsen Beoplay EX's rating is read as, the first number of 5 denotes that ingress of dust is not totally prevented but dust does not enter in harmful quantities to interfere with the correct operation or impair safety, and of liquids that they are protected against temporary immersion in water under set conditions, say 1 metre for 30 minutes. Compared to the Bang & Olufsen Beoplay EX, Anker Soundcore Liberty 3 Pro have a rating of IPX4 meaning that
no data available to specify a protection rating
and that of liquids is that,
Anker Soundcore Liberty 3 Pro has a lower liquid rating than Bang & Olufsen Beoplay EX
The Bang & Olufsen Beoplay EX have a weight of 12g . We take in account a lower weight best for the reason that lighter devices are more comfortable to carry.
The Anker Soundcore Liberty 3 Pro, at 12g
have the same weight as the Bang & Olufsen Beoplay EX
True wireless devices have no cables connecting any part of the device together, Bang & Olufsen Beoplay EX are true wireless for this case since they don't have wires. This is a key difference as some wireless earbuds have wires connecting the 2 earbuds together. Anker Soundcore Liberty 3 Pro also is true wireless because it has no wires linking the 2 earbuds .
Bang & Olufsen Beoplay EX have sweat resistance
Anker Soundcore Liberty 3 Pro's resistance to sweat makes both devices good for use while doing sports such as long-distance running, marathons, cardio sweat workouts , etc
Bang & Olufsen Beoplay EX have stereo speakers, devices with stereo speakers deliver sound from independent channels on both left and right sides, this creates a richer sound and a better listening experience.
Both Anker Soundcore Liberty 3 Pro and Bang & Olufsen Beoplay EX have stereo speakers
Active noise cancellation uses advanced technology to actively counter noise. ANC works when, it detects and analyzes the sound pattern of incoming noise and generates a mirror signal to cancel it out. In simple terms, it's like having +1 (noise) then producing -1 (inverted noise) giving 0 resulting in a reduced level of noise.
Bang & Olufsen Beoplay EX have Active Noise Cancellation enabling you to listen at lower levels of volume, good for your ears as you don't need to crank up the earbuds volume to overcome background sounds. The Anker Soundcore Liberty 3 Pro too have ANC which makes either of the earbuds ideal for flights and morning travels. The Bang & Olufsen Beoplay EX and Anker Soundcore Liberty 3 Pro work with different noise cancellation types, pick the setting that suits your travel or that suites your chill time.
The Bang & Olufsen Beoplay EX stay tightly in place, creating a sound covering that reduces background sounds and also prevents the earbuds voice audio from leaking out .
Both Anker Soundcore Liberty 3 Pro, and Bang & Olufsen Beoplay EX have passive noise reduction which means that both reduce ambient noise without using technology to cancel it out. Bang & Olufsen Beoplay EX have a unit size of 9.2mm in diameter, the bigger the unit the more powerful, therefor producing better bass. A driver unit is basically a mini speaker that produces sound in the earbuds, its size determines the sound made by the earbuds.
Anker Soundcore Liberty 3 Pro driver unit is 10.6mm in diameter,
making them have a larger driver unit than that of Bang & Olufsen Beoplay EX by 1.4mm
, many people have a misconception that driver units of a bigger size automatically produce better sound quality.
However, large drivers find it difficult to produce high frequencies so yeah, larger drivers can generate louder sound, but this does not imply that they deliver better quality sound. Bang & Olufsen Beoplay EX's lowest frequency is at 20Hz, low-frequency response inidcates how well a particular audio component generates low frequencies that can be heard, and if it alters the signal while at it.
Anker Soundcore Liberty 3 Pro's lowest frequency is at 20Hz, this means that
both devices can make sound with equal bass
The Bang & Olufsen Beoplay EX's highest frequency is at 20,000Hz, high-frequency response tells how well an audio component produces high human frequencies and if it makes any adjustments to the signal while at it. Anker Soundcore Liberty 3 Pro's highest frequency is at 40,000Hz, this means that
Anker Soundcore Liberty 3 Pro generate a clearer and crispier treble than the Bang & Olufsen Beoplay EX
The Bang & Olufsen Beoplay EX's battery life is 8 hours, these last longer than 5 hours of listening which is considered average for a single charge. A device's battery life is commonly given by the manufacturer, and with longer battery life, you get to use it for longer and requires fewer chargings.
Anker Soundcore Liberty 3 Pro's battery life is
equal to that of the Bang & Olufsen Beoplay EX
. Each time you recharge your device, they get a little less listening time. The effect is barely noticeable at first, but over time, your wireless earbuds will no longer play for long like they used to. The battery life of the charging case is given by the manufacturer, and Bang & Olufsen Beoplay EX's case has a full charge of 20 hours.
A charging case with a longer battery life enables you to recharge your earbuds on the go several times before recharging the case itself. Anker Soundcore Liberty 3 Pro's charging case has a battery life of 24 hours,
more than that of Bang & Olufsen Beoplay EX by 4 hours
It requires 1.5 hours to fully charge the Bang & Olufsen Beoplay EX's battery. It is recommended to charge fully the battery before using the earbuds when they have been unused for extended periods.
Anker Soundcore Liberty 3 Pro takes 2 hours to fully charge the battery,
more than that of Bang & Olufsen Beoplay EX by 0.5 hours
Bang & Olufsen Beoplay EX, the device supports wireless charging. To charge the device, you just put down on a supported charging pad. Anker Soundcore Liberty 3 Pro also support wireless charging, take note of the charging standard of a device.
The Bang & Olufsen Beoplay EX have a battery level indicator, an indicator alerts you when the device has a low battery. Its lights display the charging state of your earbuds and case. Anker Soundcore Liberty 3 Pro too have a battery level indicator, charging indicators allow you determine the charging state of your earbuds, whether fully charged, or having a low battery.
The Bang & Olufsen Beoplay EX use USB TYPE-C, an industry-standard connector for transmitting both data and power in a single cable. Anker Soundcore Liberty 3 Pro too have USB TYPE-C. This USB-C plug comes along with most current electronics.
Bang & Olufsen Beoplay EX have Bluetooth version of 5.2, Bluetooth is a wireless technology standard that enables data movement between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves. Anker Soundcore Liberty 3 Pro has a Bluetooth version of 5.2,
equal to that of the Bang & Olufsen Beoplay EX
. Newer versions provide faster data transfers. The Bang & Olufsen Beoplay EX have a 10meters distance connecting via Bluetooth.
Anker Soundcore Liberty 3 Pro have a maximum range of 10meters,
equal to that of the Bang & Olufsen Beoplay EX
Bang & Olufsen Beoplay EX support AAC, a codec used for Bluetooth audio. It supports 24-bit audio at 250kbps. Because it uses psychoacoustic modeling, it can provide better results than other codecs at a similar bit rate.
Being the highest quality codec that any Bluetooth-supporting Apple product supports, the Bang & Olufsen Beoplay EX will work well with your iPad. If you intend on using these with Android , ensure that they also support aptX HD, LDAC, or LHDC as well. The Anker Soundcore Liberty 3 Pro support AAC as well.
Designed to be the successor of the MP3 format, AAC generally achieves higher sound quality than MP3 encoders at the same bit rate. Bang & Olufsen Beoplay EX support APTX Adaptive, an audio codec for Bluetooth devices that are developed by Qualcomm. It has a variable bit rate (between 279kbps and 420kbps).
The Bang & Olufsen Beoplay EX have 6 microphones.
While the Anker Soundcore Liberty 3 Pro microphones are 6,
equal to that of the Bang & Olufsen Beoplay EX
. More microphones result in better sound quality and enable the device to filter out noise. The Bang & Olufsen Beoplay EX have a noise-canceling microphone, these microphones are designed to reduce background sounds from the earbuds' sound. The Anker Soundcore Liberty 3 Pro too use a noise-canceling microphone.
Especially useful in noisy environments. The Bang & Olufsen Beoplay EX support ambient sound mode, which uses microphones to pass through ambient sound so that they can still be heard even while wearing them
The Anker Soundcore Liberty 3 Pro support ambient sound mode as well, helpful when you want to listen to music while being aware of your surrounding, for example when you’re having a run but still want to be able to hear traffic. The Bang & Olufsen Beoplay EX support fast charging.
Usually, technologies like MediaTek’s Pump Express, are used to lower the amount of time it takes to fully charge the earbuds. Anker Soundcore Liberty 3 Pro too support fast charging. It's very similar to regular charging, only that the battery is filling up much faster.
For example, with Quick Charge 3.0, the battery is charged to 50% in just thirty minutes. The Bang & Olufsen Beoplay EX support multipoint of 2 connections, this feature allows you to link to more than one Bluetooth device and switch between them. For example, you can easily switch calls from one device to another without manually disconnect and reconnect.
The Anker Soundcore Liberty 3 Pro have a multipoint count of 2,
equal to that of the Bang & Olufsen Beoplay EX
. Bluetooth multipoint is useful because you can be on one call without missing notifications coming from another connected device. The Bang & Olufsen Beoplay EX have a mute function, they support the option to mute/unmute a conversation directly from the device. The Anker Soundcore Liberty 3 Pro also support the mute function.
The mute function means that you unilaterally turn off the device's microphone, but still hear the other party talk. With the Bang & Olufsen Beoplay EX, so you can easily access the volume control, pause, play, mute, etc whichever functions are supported on the earbuds. The Anker Soundcore Liberty 3 Pro also have a control panel on them.
Bang & Olufsen Beoplay EX have a warranty period of 3 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use following instruction manuals. When covered under the manufacturer’s warranty it is possible to get a replacement a malfunction occurs. Anker Soundcore Liberty 3 Pro have a warranty period of 1Years,
less than that of Bang & Olufsen Beoplay EX by 2 Years
.
The Bang & Olufsen Beoplay EX support voice prompts.
Automatically receive information through audio messages, like if there is an issue with the connection. The Anker Soundcore Liberty 3 Pro also have voice prompts .i.e the earbuds notifies you if the battery is low, and you need to recharge them. Bang & Olufsen Beoplay EX come with a special pouch.
Carrying earphones without a case, or placing them inside your pockets without a casing may easily put them at risk of getting damaged. Anker Soundcore Liberty 3 Pro too have a travel bag included, which is useful for safe transportation.
