Overall Score 6.6 Represents average audio ecosystem compatibility score.
Overall Score 6.4 Represents average audio ecosystem compatibility score.
IP ratings is the rank of protection given by a casing, against dust and liquids. The letters 'IP' are followed by two values The first value means protection against solids such as dust, followed by the one that refers to protection against liquids (water).
Scoring IP57, the Bang & Olufsen Beoplay EX's rating for solids indicates that ingress of dust is not totally prevented but dust does not enter in harmful quantities to interfere with the correct operation or impair safety, and of liquids that they are protected against temporary immersion in water under set conditions, say 1 metre for 30 minutes.
In comparison to the Bang & Olufsen Beoplay EX, JEET W1S have a rating of IPX5 meaning that
no data available to specify a protection rating
and that of liquids is that,
JEET W1S has a lower liquid rating than Bang & Olufsen Beoplay EX
The Bang & Olufsen Beoplay EX have a weight of 12g . We take in account a lower weight best for the reason that lighter devices are easier to transport.
JEET W1S, at 18g
are heavier than the Bang & Olufsen Beoplay EX by of 6g
True wireless devices have no wires linking any part of the device together, Bang & Olufsen Beoplay EX are true wireless for this case since they don't have wires. This is a key difference since wireless earbuds have wires connecting the pair of earbuds together.
JEET W1S have wingtips, these are commonly used for earbuds for workouts and are usually an optional add-on to each silicone ear tip for a better fit.
Bang & Olufsen Beoplay EX are resistant to sweat
JEET W1S's resistance to sweat makes both devices fit for use during long-distance running, marathons, cardio sweat workouts , etc
Bang & Olufsen Beoplay EX have stereo speakers, devices with stereo speakers deliver sound from independent channels on both left and right sides, this creates a richer sound and a better listening experience.
Both JEET W1S and Bang & Olufsen Beoplay EX have stereo speakers
Active noise cancellation uses more advanced technology to reduce ambient sounds. ANC works when, it studies the sound pattern of incoming noise and then inverts the soundwaves to cancel it out. Simply put, it's like having +1 (noise) and adding -1 (counter sound by the device) giving zero which results in a reduced level of noise.
The Bang & Olufsen Beoplay EX have Active Noise Cancellation enabling you to listen at lower levels of volume, causing less ear fatigue since you don't need to crank up the device volume to outcompete background noise.
Bang & Olufsen Beoplay EX stay well in place, this creates an acoustic covering that reduces background sounds while preventing the device voice audio from leaking out at the same.
Both of these devices have passive noise reduction which means that both tone down ambient noise instead of actively using ANC to cancel it out.
Bang & Olufsen Beoplay EX driver unit is 9.2mm in diameter, bigger drivers are more powerful, and can produce better bass.
The driver unit is basically a mini speaker that makes sound in the device, the unit size dictates the sound produced by the earbuds.
JEET W1S driver unit is 11mm in diameter,
making them have a larger driver unit than that of Bang & Olufsen Beoplay EX by 1.8mm
, a common assumption that driver units of a bigger size automatically produce better sound quality.
However, large drivers usually have difficulty producing high frequencies so yeah, larger drivers are capable of generating louder sound, but this does not imply that they deliver better quality sound.
The Bang & Olufsen Beoplay EX's lowest frequency is at 20Hz, low-frequency response measures if and how well an audio device produces low frequencies that can be heard, and if it makes any changes to the signal on its way through.
JEET W1S's lowest frequency is at 20Hz, this means that
both devices can make sound with equal bass
The Bang & Olufsen Beoplay EX's highest frequency is at 20000Hz, high-frequency response shows how well a particular audio device generates high audible frequencies and if it changes to the signal on its way through.
JEET W1S's highest frequency is at 20000Hz, this means that
both devices produce equal treble
SPL, is the pressure level of sound, in decibels, dB, JEET W1S's measurement is 93dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
Bang & Olufsen Beoplay EX's battery life is 8 hours, a device's battery life is usually given by the manufacturer, and with more battery hours, you get to use it for longer and requires fewer chanrgings.
JEET W1S's battery life is
more than that of Bang & Olufsen Beoplay EX by 3 hours
. Each time you recharge your device, they get a little less playing time. The effect is barely noticeable at first, but over a few years, your wireless earbuds will have shorter listening time.
The battery life of the charging case is given by the manufacturer, and Bang & Olufsen Beoplay EX's case is said to have a full charge of 20 hours. A charging case with more battery hours allows you to recharge your earbuds on the go multiple times before having to recharge the case itself.
It requires 1.5 hours to fully charge the Bang & Olufsen Beoplay EX's battery. It is recommended to charge fully the battery before using the earbuds for the first time.
Bang & Olufsen Beoplay EX's battery power is 70mAh, battery power, shows the amount of electrical energy that a battery can keep.
Bang & Olufsen Beoplay EX, the device supports wireless charging. To charge the earbuds, you simply put down on a supported charging pad.
The Bang & Olufsen Beoplay EX have a battery level indicator, an indicator notifies you when the device has a low battery. The battery indicator lights show the charging status of your device and case.
JEET W1S too have a battery level indicator, charging indicators allow you tell the charging state of your device, whether fully charged, or having a low battery.
Bang & Olufsen Beoplay EX use USB TYPE-C, an industry-standard connector for transmitting both data and power through a single cable.
The Bang & Olufsen Beoplay EX have Bluetooth version of 5.2, Bluetooth is a wireless technology standard that enables data movement between devices placed in range, using short-wavelength, ultra-high frequency radio waves.
JEET W1S has a Bluetooth version of 4.1,
older than that of Bang & Olufsen Beoplay EX
. Newer versions provide faster data transfers.
Bang & Olufsen Beoplay EX have a 10meters distance to connect via Bluetooth.
JEET W1S have a maximum range of 10meters,
equal to that of the Bang & Olufsen Beoplay EX
Bang & Olufsen Beoplay EX support AAC, a codec used for Bluetooth audio. It supports 24-bit audio at 250kbps. Since it uses psychoacoustic modeling, it provides better results than other codecs at a similar bit rate.
Being the highest quality codec that any Bluetooth-supporting Apple product supports, the Bang & Olufsen Beoplay EX will work fine with your iPad. If you are planning on using these with Android you need to pay even closer attention to codec support for if they only have AAC they won't provide the best audio quality possible, ensure that they also support aptX HD, LDAC, or LHDC as well.
The JEET W1S support AAC as well. Designed to be the successor of the MP3 format, AAC generally achieves higher sound quality than MP3 encoders at the same bit rate.
JEET W1S support LDAC, a codec developed by Sony which allows streaming high-resolution audio over Bluetooth connections at up to 990 kbps at 32 bit/96 kHz. It can reach a high bitrate of 990kbps, which provides high-resolution audio.
Bang & Olufsen Beoplay EX support APTX Adaptive, an audio codec for Bluetooth devices that are developed by Qualcomm. It has a variable bit rate (between 279kbps and 420kbps).
JEET W1S support APTX Adaptive as well which implies that both can adjust the bit rate for different scenarios, such as reducing interference from other devices.
JEET W1S support APTX Low Latency, a codec developed by Qualcomm. It uses Bluetooth 5.0 technology to provide low latency audio (around 40ms), which is useful when you want to avoid audio lag for example when playing games.
The JEET W1S support APTX HD, an audio codec for Bluetooth devices that are developed by Qualcomm. It supports high-quality 24-bit audio (at a bit rate of 576kbps).
Latency refers to the time it takes for the audio signal to be transmitted to your earbuds. JEET W1S have a latency of 88ms, a lower latency reduces audio lag and is particularly important when playing games or watching videos.
The Bang & Olufsen Beoplay EX have 6 microphones.
JEET W1S microphones are 1,
less than that of Bang & Olufsen Beoplay EX by 5
. More microphones result in better sound quality and help the earbuds to filter out noise.
The Bang & Olufsen Beoplay EX have a noise-canceling microphone, these microphones are intended to reduce background sounds from the earbuds' sound.
The Bang & Olufsen Beoplay EX support ambient sound mode, which uses microphones to pass through ambient sound to still be heard even while wearing them
The JEET W1S support ambient sound mode as well, helpful when you want to listen to music but also be aware of what’s happening around you, say you’re having a jog but still want to be able to hear traffic.
JEET W1S support in/on-ear detection, the sensors in the earbuds can detect when they are removed from your ears .
When lost in a room, or can't easily find them in your bag, JEET W1S support the find earbuds feature.
Bang & Olufsen Beoplay EX support fast charging. Most often, technologies like Qualcomm’s Quick Charge, are used to lower the time it takes to charge the earbuds.
Also the JEET W1S too support fast charging. This kind is similar to regular charging, only that the battery fills up much faster. Say, with Quick Charge 3.0, the battery can be charged to 50% in 30 minutes.
Bang & Olufsen Beoplay EX have a multipoint of 2 connections, the multipoint feature allows you connect to more than one Bluetooth device and switch between them. Say, you can easily switch calls from one device to another without having to manually disconnect and reconnect.
The Bang & Olufsen Beoplay EX have a mute function, they have the option to mute/unmute a conversation directly from the device.
The JEET W1S also support this function. It means that you unilaterally turn off the earbuds' microphone, but still hear the other party talk.
The Bang & Olufsen Beoplay EX, so you can access the volume control, pause, play, mute, etc whichever features are supported on the device.
JEET W1S also have a control panel on them.
The Bang & Olufsen Beoplay EX have a warranty period of 3 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use following instruction manuals.
If covered under the manufacturer’s warranty it is possible to get a replacement in the case of a malfunction. JEET W1S have a warranty period of 1Years,
less than that of Bang & Olufsen Beoplay EX by 2 Years
.
The Bang & Olufsen Beoplay EX have voice prompts. Automatically receive information via audio messages, like if there is a problem with the connection.
JEET W1S too have voice prompts meaning the earbuds will notify you when the battery is running low, and you need to recharge them.
The Bang & Olufsen Beoplay EX come with their own special pouch. Carrying earbuds without a case, or placing them inside your bag without a cover can easily put them at risk of getting damaged.
JEET W1S too have a travel bag included, which is useful for safe transportation.