Bang & Olufsen Beoplay H95 have a weight of 323g, these are higher than 320g, which we consider as the highest average a headphone should weigh for comfort during long use. We consider a lower weight better because lighter devices are more comfortable to transport. Sony WH 1000XM3, at 255g
are lighter than the Bang & Olufsen Beoplay H95 with a difference -68g
Detachable cables are cables that have connectors on both ends.
One end goes into your headphone earpieces, while the other end is inserted into an audio source. Some new headphones, and not just the expensive ones, are coming with detachable cables, Bang & Olufsen Beoplay H95 are one of those. With a detachable cable, Sony WH 1000XM3 too can use alternative cables and if the cable is pulled, it will pop out instead of breaking.
Bang & Olufsen Beoplay H95 are foldable, which makes them more portable. Foldable headphones are easier to transport and take up less storage space. The Sony WH 1000XM3 too can fold up, foldable headphones can reduce their size by 60% to 70% when folded.
Twisted headphone cables can be a great source of annoyance and inconvenience, Bang & Olufsen Beoplay H95's cable is designed to minimize tangling. Constant twisting of the cables can also lead to bends in the copper wires, affecting sound quality, or
rendering your headphones defective. A long cable ensures more freedom of movement, but remember that every cable based on the conducting material used has a certain amount of parasitic resistance, inductance, and capacitance.
How much depends on the length and construction. Bang & Olufsen Beoplay H95 comes with a 1.25meters cable. Sony WH 1000XM3 comes with a 1.2meters cable.
Almost any cable should be fine in sound quality If you're looking at lengths up to 2 - 3 meters. Over-ear headphones have larger earpads that fit around your entire ear Bang & Olufsen Beoplay H95 have a comfortable full-size form with earcups that fully enclose your ears. This design is loved for its increased sound isolation and the fact that it won't leak sound to your neighbors.
Sony WH 1000XM3 with this design offer potential for maximum bass and loudness levels. Bang & Olufsen Beoplay H95 have stereo speakers, what this means is that Bang & Olufsen Beoplay H95's speakers deliver sound from independent channels on both left and right sides, this creates a richer sound and a better listening experience. The Sony WH 1000XM3 also have stereo speakers
Active noise cancellation uses more advanced technology to reduce unwanted ambient sounds.
How it works, it listens to the sound pattern outside and inside the earbud and then generates a mirror signal to cancel it out. In simple terms, it's like taking +1 outside (noise from your surrounding) and adding -1 inside (counter sound within the device) to make zero hence "diluting" the noise.
Bang & Olufsen Beoplay H95 allow you to listen at lower volume levels, causing less ear fatigue as you don't have to crank up the volume to overcome background noise.
Sony WH 1000XM3 too have active noise cancellation making both devices ideal for plane rides and morning commutes. Each may work with different noise cancellation modes, pick the setting, mode, or noise cancellation type that suits your commute or that enhances your relaxation time. Low-frequency response measures if and how well an audio component reproduces low audible frequencies and if it makes any changes to the signal while at it.
Bang & Olufsen Beoplay H95's lowest frequency is at 20Hz, the lower the low-frequency response, the stronger and juicier the bass. Sony WH 1000XM3's lowest frequency is at 4Hz, this means that
Bang & Olufsen Beoplay H95 got a juicier bass than the Sony WH 1000XM3
High frequency response measures if and how well an audio device reproduces high audible frequencies and if it changes to the signal while at it. Bang & Olufsen Beoplay H95's highest frequency is at 22,000Hz, the higher the high-frequency response, the clearer and crispier the treble.
Sony WH 1000XM3's highest frequency is at 40,000Hz, this implies that
Sony WH 1000XM3 got a clearer and crispier treble than the Bang & Olufsen Beoplay H95
Sound pressure is the average variation in atmospheric pressure caused by the sound, the sound level .i.e how loud something is can be perceived differently by different people so we need to have the means to get an objective measurement of sound level expressed in numerical terms.
The sound pressure level, SPL, is the pressure level of a sound, measured in decibels, dB, Bang & Olufsen Beoplay H95's measurement is 101.5dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
Sony WH 1000XM3's sound pressure level measurement is 104.5dB/mW. The driver unit is basically a mini speaker that produces sound in the device, its size dictates the loudness of the headphone. Bang & Olufsen Beoplay H95 driver unit is 40mm in diameter, bigger drivers are more powerful and can produce better bass.
Sony WH 1000XM3 driver unit is 40mm in diameter,
making both devices similar in how loud their sound gets
, as many tend to believe that driver units of a bigger size automatically produce better sound quality.
However, large drivers usually have difficulty reproducing high frequencies so yes, larger drivers are capable of generating louder sound, but this does not mean that they deliver better sound. Impedance is the device's resistance to the electromagnetic current, as electricity flows through a wire, it faces electrical resistance that counters the flow of current.
The resistance of a wire is measured in ohms. Bang & Olufsen Beoplay H95's impedance is 12Ohms, the lower the impedance, the easier it is to get higher volume and requires less power. Sony WH 1000XM3's impedance is 16Ohms.
The impedance of earbuds is the electrical resistance of the driver unit present on the inside. Neodymium magnets when used in audio devices produce a higher sensitivity and substantial sound output using less power to do so. They can help produce music at quite a high sound pressure level, SPL, with the use of high magnetic flux.
The Bang & Olufsen Beoplay H95 have this type of magnet. Sony WH 1000XM3 have it too, devices with neodymium magnets are lighter and more powerful than those which use ferrite magnets. It is also known that they have more bass and clear high notes.
If your headphones play wirelessly, cancel ambient noise, or enhance your listening experience with active features, their battery life will reduce over time. The device's battery life is given by the manufacturer, with longer battery life, you get to use it for longer and have to charge the device less often. Bang & Olufsen Beoplay H95's battery life is 50 hours
Sony WH 1000XM3's battery life is 30 hours.
Each time you recharge your headphones, they get a little less listening time. The effect is barely noticeable at first. But over a few years, you may find that your device, no longer plays for long like it used to.
It takes 2 hours to fully charge the Bang & Olufsen Beoplay H95's battery. It is recommended to fully charge the battery before using the headphones for the first time or when they have been unused for extended periods. Sony WH 1000XM3 takes 3 hours to fully charge the battery
Bang & Olufsen Beoplay H95 have a battery level indicator, an indicator shows you when the device has a low battery.
The battery indicator lights show the charging status of your headphones. Sony WH 1000XM3 too have a battery level indicator, charging indicators allow you to determine the charging state of your headphones, whether fully charged, or the battery is running low. Battery power, or battery capacity, represents the amount of electrical energy that a battery can store.
Bang & Olufsen Beoplay H95's battery power is 1,110mAh, more battery power can be an indication of longer battery life. Sony WH 1000XM3's battery power is 1,000mAh. A rechargeable battery is a type of electrical battery that can be charged, discharged into a load, and recharged many times, as opposed to a disposable or primary battery, which is supplied fully charged and discarded after use.
Bang & Olufsen Beoplay H95's battery can be recharged and used over again. The Sony WH 1000XM3 too have a rechargeable battery. Bang & Olufsen Beoplay H95 can be used wirelessly, wireless devices allow you more freedom of movement not restricted by a cable.
The Sony WH 1000XM3 also can be used wirelessly
Bluetooth is a wireless technology standard that allows data transfers between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves. Bang & Olufsen Beoplay H95 has a v5.1
Sony WH 1000XM3 has a Bluetooth version of v4.2. Newer versions provide faster data transfers.
Bang & Olufsen Beoplay H95 support USB TYPE-C, an industry-standard connector for transmitting both data and power on a single cable. The USB-C plug is now part and parcel of most current laptops, phones, and tablets, it features reversible plug orientation and cable direction. Sony WH 1000XM3 too have USB TYPE-C
Bang & Olufsen Beoplay H95 support APTX Adaptive, an audio codec for Bluetooth devices that are developed by Qualcomm.
It has a variable bit rate (between 279kbps and 420kbps), which means it can adjust the bit rate for different scenarios, such as listening to HD audio or reducing interference from other devices. Bang & Olufsen Beoplay H95 support APTX, a codec used for transmitting audio wirelessly with Bluetooth. It is developed by Qualcomm and supports 16-bit audio at a bit rate of 384kbps.
Sony WH 1000XM3 support APTX
Bang & Olufsen Beoplay H95 support AAC, a codec that is used for Bluetooth audio. It supports 24-bit audio at 250kbps. Because it uses psychoacoustic modeling, it can provide better results than other codecs at a similar bit rate.
The Sony WH 1000XM3 support AAC as well. Designed to be the successor of the MP3 format, AAC generally achieves higher sound quality than MP3 encoders at the same bit rate. Bluetooth is a short-range wireless technology standard that is used for exchanging data between fixed and mobile devices over short distances.
The Bang & Olufsen Beoplay H95 can connect at a 10meters distance via Bluetooth or infrared to another device. The Sony WH 1000XM3 can connect at a 10meters distance via Bluetooth
Being an industry standard audio plug, a standard 3.5mm male connector is suitable for use with all MP3 players and computer sound cards. This means that it is commonly used in stereo headphones to your phone or connecting your phone to an external amplifier, sound bars, your car radio, etc.
Bang & Olufsen Beoplay H95 has this connector giving it a wider range of connectivity with most of the sound devices out there. All plugs have at least a tip and sleeve with the number of rings that stand as a differentiating factor. Sony WH 1000XM3 too have this kind of connector
Bang & Olufsen Beoplay H95 have only 4 microphones, more microphones result in better sound quality and enable the device to filter out background noise.
The Sony WH 1000XM3 microphones are only 5. Bang & Olufsen Beoplay H95 use a noise-canceling type of microphone, these microphones are designed to filter out background noise from the desired sound. Especially useful in noisy environments.
The Sony WH 1000XM3 too use a noise-canceling type of microphone. Bang & Olufsen Beoplay H95 support ambient sound mode, which uses microphones to pass through ambient noises so that they can still be heard. It’s useful when you want to listen to music but also be aware of what’s happening around you, for example when you’re having a jog but would still want to be able to hear traffic.
The Sony WH 1000XM3 support ambient sound mode as well allowing you to hear the ambient sound even while wearing them. Bang & Olufsen Beoplay H95 support multipoint, which allows you to link to more Bluetooth devices and switch between them. For example, you can easily switch calls from one device to another without having to manually disconnect and reconnect.
There is a control panel on the Bang & Olufsen Beoplay H95 body, so you can easily access the volume control or remote without having to interact with a cable or another device it's connected to. The Sony WH 1000XM3 too have a control panel on them. Bang & Olufsen Beoplay H95 can be used as a headset.
A headset is one headphone or pair with a built-in microphone. Headsets can be used for apps that require communication i.e. Zoom, Google Meet, Skype, games with voice chat, mobile phones, etc.
Sony WH 1000XM3 can be used as a headset. since they have a built-in microphone
The period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use that has followed instruction manuals. When covered under the manufacturer’s warranty it is possible to get a replacement in the case of a malfunction.
Bang & Olufsen Beoplay H95 have a warranty period of 3 years
The Sony WH 1000XM3 have a warranty period of 1years. Carrying headphones without a case, or putting them in bags without a casing can easily put them at risk of getting damaged. The Bang & Olufsen Beoplay H95 come with their own special case or pouch, which is useful for safe transportation.
Sony WH 1000XM3 too have a travel bag or case included.
