Has Active Noise Cancellation (Noise Control)
Beats Fit Pro
✓
JEET W1S ✗
ANC makes use of more advanced technology to actively counter noise. ANC works when, it studies the sound pattern of incoming noise and after inverts the soundwaves to cancel it out. Simply put, it's like having +1 (sound from your surrounding) then adding -1 (counter sound by the device) giving 0 resulting in a reduced level of noise.
Beats Fit Pro have ANC enabling you to listen at lower volume levels, causing less ear fatigue since you don't need to crank up the earbuds volume to outcompete background noise.
Has Passive Noise Reduction
Beats Fit Pro
✓
JEET W1S ✓
Beats Fit Pro stay well in place, creating an acoustic covering that tones down your environment noise well as preventing the device music from leaking out at the same.
Both of these devices have passive noise reduction which implies that they tone down ambient noise without using ANC to cancel it out.
Driver Unit Size
Beats Fit Pro
9.5mm
JEET W1S 11mm
Beats Fit Pro have a unit size of 9.5mm in diameter, bigger drivers are more powerful, and can produce better bass.
The driver unit is basically a mini speaker that produces sound in the earbuds, the unit size determines the loudness of the earbuds.
JEET W1S driver unit is 11mm in diameter,
making them have a larger driver unit than that of Beats Fit Pro by 1.5mm
, many people have a misconception that driver units of a bigger size automatically produce better sound quality.
However, large drivers find it difficult to produce high frequencies so it's true that, larger drivers are capable of generating louder sound, but this does not mean that they produce better quality sound.
Lowest Frequency
Beats Fit Pro
20Hz
JEET W1S 20Hz
Beats Fit Pro's lowest frequency is at 20Hz, low-frequency response inidcates how well a particular audio component produces low recognizable frequencies and if it alters the signal on its way through.
JEET W1S's lowest frequency is at 20Hz, this means that
both devices can make sound with equal bass
Highest Frequency
Beats Fit Pro
20000Hz
JEET W1S 20000Hz
Beats Fit Pro's highest frequency is at 20000Hz, high-frequency response shows how well an audio device makes high human frequencies and if it makes any changes to the signal on its way through.
JEET W1S's highest frequency is at 20000Hz, this implies that
both devices can produce equal treble
Sound Pressure Level
Beats Fit Pro
101.3dB/mW
JEET W1S 93dB/mW
The sound pressure level, is the pressure level of sound, measured in decibels, dB, Beats Fit Pro's measurement is 101.3dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
JEET W1S's sound pressure level measurement is 93dB/mW. The sound pressure level, something is can be taken differently by separate persons, so we need to have the means to get an objective measurement of sound level expressed in numerical terms.
Has A Neodymium Magnet
Beats Fit Pro
✓
JEET W1S ✗
Beats Fit Pro have neodymium magnets, when used in earbuds produce a higher sensitivity and substantial sound output while using less power. They can help generate music at quite a high SPL, with the use of high magnetic flux.
A Review By Comparison Of The Jbl Wave Beam Vs. Beats Fit Pro
A Review By Comparison Of The Technics Eah Az80 Vs. Beats Fit Pro