Ingress protection ratings refer to the rating of protection given by an enclosure, against dust and water. The letters 'IP' are followed by two values The first value of the IP rating refers to protection against solids say dust, while the second refers to resistance against liquids (sweat).
Having a value of IPX4, the Anker Soundcore Liberty 3 Pro's rating for solids indicates that no data available to specify a protection rating, and of liquids that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes. Anker Soundcore Liberty 3 Pro have a weight of 12g . We consider a lower weight best because lighter devices are easier to transport.
For a device to be true wireless it must have no cables linking any part of the device together, Anker Soundcore Liberty 3 Pro are true wireless for this case since they have no cables. This is an important difference since wireless earbuds have wires connecting the 2 earbuds .
Anker Soundcore Liberty 3 Pro have wingtips, these are commonly used for workout earbuds and are usually an optional add-on to each silicone ear tip for a more secure fit. Anker Soundcore Liberty 3 Pro are resistant to sweat
Anker Soundcore Liberty 3 Pro have stereo speakers, what this means is that Anker Soundcore Liberty 3 Pro's speakers deliver sound from separate channels on both left and right sides, this creates a richer sound and a better listening experience.
Active noise cancellation utilises more advanced technology to reduce ambient sounds. ANC works when, it detects and analyzes the sound pattern outside and inside the earbud and after generates a mirror signal to cancel it out. Simply put, it's like having +1 (noise) and adding -1 (counter sound by the device) giving 0 therefore "diluting" the noise.
The Anker Soundcore Liberty 3 Pro have ANC allowing you to listen at lower volume levels, good for your ears since you don't need to crank up the device volume to outcompete background noise. The Anker Soundcore Liberty 3 Pro stay tightly in place, this creates an acoustic seal that reduces your environment sounds while preventing the earbuds music from leaking out at the same. Anker Soundcore Liberty 3 Pro driver unit is 10.6mm in diameter, bigger drivers are more powerful, therefor producing better bass.
A driver unit is the component that makes sound in the device, its size corellates with the sound produced by the device. The Anker Soundcore Liberty 3 Pro's lowest frequency is at 20Hz, low-frequency response measures if and how well an audio device generates low frequencies that can be heard, and if it alters the signal while at it. The Anker Soundcore Liberty 3 Pro's highest frequency is at 40,000Hz, high-frequency response indicates how well a particular audio component makes high human frequencies and if it changes to the signal on its way through.
SPL, is the pressure level of sound, in decibels, dB, Anker Soundcore Liberty 3 Pro's measurement is 92dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source. Anker Soundcore Liberty 3 Pro's battery life is 8 hours, these last longer than 5 hours of listening which is considered average for a single charge.
A device's battery life is given by the manufacturer, and with longer battery life, you get to use it for longer and have to charge the device less often. This is given by the vendor, and the Anker Soundcore Liberty 3 Pro's case has a charge of 24 hours. A charging case with more battery hours enables you to recharge your earbuds on the go several times before recharging the case itself.
It requires 2 hours to fully charge the Anker Soundcore Liberty 3 Pro's battery. It is recommended to charge fully the battery before using the earbuds for the first time. Anker Soundcore Liberty 3 Pro, the device supports wireless charging.
To charge the earbuds, you just place down on a compatible charging pad. The Anker Soundcore Liberty 3 Pro have a battery level indicator, an indicator notifies you when the device has a low battery. The battery indicator lights show the charging status of your earbuds and case.
The Anker Soundcore Liberty 3 Pro use USB TYPE-C, an industry-standard connector for transmitting both data and power in a single cable. The Anker Soundcore Liberty 3 Pro have Bluetooth version of 5.2, Bluetooth is a wireless technology standard that enables data transfers between devices placed in range, using short-wavelength, ultra-high frequency radio waves. Anker Soundcore Liberty 3 Pro have a 10meters distance connecting via Bluetooth.
Anker Soundcore Liberty 3 Pro support AAC, a codec that is used for Bluetooth audio. It supports 24-bit audio at 250kbps. Because it uses psychoacoustic modeling, it provides better results than other codecs at the same bit rate.
Since its the highest quality codec that any Bluetooth-supporting Apple product supports, the Anker Soundcore Liberty 3 Pro will work well with your iPad. If you intend on using these with Android you need to pay even closer attention to codec support for if they only have AAC they won't provide the best audio quality possible, ensure that they also support aptX HD, LDAC, or LHDC as well. Anker Soundcore Liberty 3 Pro support LDAC, a codec developed by Sony
which allows streaming high-resolution audio over Bluetooth connections at up to 990 kbps at 32 bit/96 kHz.
It can reach a high bitrate of 990kbps, providing high-resolution audio. Anker Soundcore Liberty 3 Pro have 6 microphones. The Anker Soundcore Liberty 3 Pro have a noise-canceling type of microphone, these microphones are intended to filter out noise from the desired sound.
Anker Soundcore Liberty 3 Pro support ambient sound mode, which uses microphones to pass through ambient noises to still be heard even while wearing them
The Anker Soundcore Liberty 3 Pro support in/on-ear detection, the sensors in the earbuds can detect when removed from your ears .
If misplaced in a room, or can't easily find them in your bag, the Anker Soundcore Liberty 3 Pro support the find earbuds feature. Anker Soundcore Liberty 3 Pro support fast charging. Usually, technologies like MediaTek’s Pump Express, are used to reduce the amount of time it takes to charge a device.
The Anker Soundcore Liberty 3 Pro support multipoint of 2 connections, this feature allows you connect to more than one Bluetooth device and switch between them. Say, you can easily switch calls from one device to another without having to manually disconnect and reconnect. Anker Soundcore Liberty 3 Pro have a mute function, they support the feature to mute/unmute a conversation directly from the earbuds.
With the Anker Soundcore Liberty 3 Pro, so you can easily access the volume control, pause, play, mute, etc whichever features are supported on the device. The Anker Soundcore Liberty 3 Pro have a warranty period of 1 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use that has followed instruction manuals. Anker Soundcore Liberty 3 Pro have voice prompts.
With voice prompts, you receive information through audio messages, like if there is an issue with the connection. Anker Soundcore Liberty 3 Pro come with their own special case. Carrying earbuds without a case, or putting them inside your bag without a casing can easily damage them.
