Ingress protection ratings refer to the level of protection offered by an enclosure, against solids and water. The letters 'IP' are followed by two values The first value represents protection against solids say dust, while the second refers to resistance against liquids (sweat).
Having a value of IPX4, the Beats Studio Buds's rating for solids indicates that no data available to specify a protection rating, and the second number of 4 means that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes. The Beats Studio Buds have a weight of 5.1g . We prefer a lower weight better for the reason that lighter devices are more comfortable to transport.
For a device to be true wireless it should have no wires connecting any part of the device together, Beats Studio Buds are true wireless for this matter since they don't have wires. This is a major distinction since wireless earbuds have cables linking the 2 earbuds .
Beats Studio Buds are resistant to sweat
Beats Studio Buds have stereo speakers, what this means is that Beats Studio Buds's speakers deliver sound from independent channels on both left and right sides, this creates a richer sound and a better listening experience. Active noise cancellation makes use of more advanced kind of tech to actively counter noise.
ANC works when, it studies the sound pattern outside and inside the earbud and after inverts the soundwaves to cancel it out. In simple terms, it's like having +1 (noise) and adding -1 (counter sound by the device) giving zero which results in a reduced level of noise.
The Beats Studio Buds have ANC enabling you to listen at lower levels of volume, causing less ear fatigue as you don't have to crank up the device volume to outcompete background sounds.
The Beats Studio Buds stay tightly in place, this creates an acoustic covering that tones down background noise and also prevents the device sound from leaking out .
The Beats Studio Buds driver unit is 8.2mm in diameter, bigger drivers are more powerful, and can produce better bass. A driver unit is the component that produces sound in the earbuds, its size dictates the loudness of the earbuds. Beats Studio Buds's lowest frequency is at 20Hz, low-frequency response inidcates how well a particular audio component generates low recognizable frequencies and if it makes any changes to the signal while at it.
The Beats Studio Buds's highest frequency is at 20,000Hz, high-frequency response tells how well a particular audio component produces high audible frequencies and if it adjustments to the signal while at it. The sound pressure level, is the level of pressure of sound, in decibels, dB, Beats Studio Buds's measurement is 100.5dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
Beats Studio Buds's battery life is 8 hours, these last longer than 5 hours of listening which is considered average before recharge. A device's battery life is given by the manufacturer, and with longer battery life, you get to use it for longer and requires fewer chargings. The battery life of the charging case is given by the vendor, and Beats Studio Buds's case is said to have a full charge of 16 hours.
A charging case with a longer battery life allows you to recharge your earbuds on the go many times before having to recharge the case itself. It takes 1.5 hours to fully charge the Beats Studio Buds's battery. It is highly adivsable to charge fully the battery before using the earbuds for the first time.
The Beats Studio Buds have a battery level indicator, an indicator notifies you when the device has a low battery. Its lights display the charging status of your device and case. Beats Studio Buds have USB TYPE-C, a standard connector for transmitting both data and power through a single cable.
Beats Studio Buds have Bluetooth version of 5.2, Bluetooth is a wireless technology standard that enables data transfers between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves. The Beats Studio Buds have a 10meters distance to connect via Bluetooth. Beats Studio Buds support AAC, a codec used for Bluetooth audio.
It supports 24-bit audio at 250kbps. Because it uses psychoacoustic modeling, it provides better results than other codecs at the same bit rate.
Being the highest quality codec that any Bluetooth-supporting Apple product supports, the Beats Studio Buds will work fine with your iPad.
If you intend on using these with Android , ensure that they also support aptX HD, LDAC, or LHDC as well. Beats Studio Buds have 6 microphones. The Beats Studio Buds use a noise-canceling type of microphone, these microphones are intended to reduce noise from the desired sound.
Beats Studio Buds support ambient sound mode, which uses microphones to pass through ambient noises so that they can still be heard even while wearing the earbuds
When misplaced in a room, or can't be found in your bag, Beats Studio Buds have a find earbuds feature. The Beats Studio Buds support fast charging. Commonly, technologies like MediaTek’s Pump Express, are used to reduce the amount of time it takes to fully charge the earbuds.
Beats Studio Buds have a multipoint of 2 connections, the multipoint feature allows you to link to more than one Bluetooth device and switch between them. For example, you can switch calls from one device to another without manually disconnect and reconnect. Beats Studio Buds have a mute function, they support the option to mute/unmute a conversation directly from the earbuds.
The Beats Studio Buds, so you can easily access the volume control, pause, play, mute, etc whichever features are supported on the device. The Beats Studio Buds have voice prompts. Automatically receive information via audio messages, say if there is a problem with the connection.
Beats Studio Buds come with their own special case. Carrying earbuds openly, or putting them in your bag without a casing can easily put them at risk of getting damaged.
