Beats Studio Buds Review

Ingress protection ratings refer to the level of protection offered by an enclosure, against solids and liquids. In the format of IPXX, 'X' represents a number The first value of the IP rating represents protection against solids say dust, followed by the one that refers to protection against liquids (water).

Scoring IPX4, the Beats Studio Buds's rating for solids indicates that no data available to specify a protection rating, and of liquids that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes. The Beats Studio Buds have a weight of 5.1g . We consider a lower weight better for the reason that lighter devices are easier to move with.

True wireless devices have no cables connecting any part of the device together, Beats Studio Buds are true wireless for this case since they don't have wires. This is a key difference since wireless earbuds have cables connecting the pair of earbuds together. Beats Studio Buds have sweat resistance Beats Studio Buds have stereo speakers, devices with stereo speakers deliver sound from separate channels on both left and right sides, this creates a richer sound and a better listening experience.

ANC makes use of more advanced technology to actively cancel noise. How it works, it detects and analyzes the sound pattern outside and inside the earbud and then generates a mirror signal to cancel it out. In simple terms, it's like having +1 (sound from your surrounding) then producing -1 (counter sound by the device) giving zero resulting in a reduced level of noise.

Beats Studio Buds have Active Noise Cancellation allowing you to listen at lower volume levels, good for your ears as you don't have to crank up the device volume to overcome background sounds. The Beats Studio Buds sit tightly in place, creating an acoustic covering that tones down background noise and also prevents the earbuds voice audio from leaking out at the same. The Beats Studio Buds driver unit is 8.2mm in diameter, the bigger the unit the more powerful, and can produce better bass.

The driver unit is basically a mini speaker that produces sound in the device, the unit size corellates with the sound produced by the device. The Beats Studio Buds's lowest frequency is at 20Hz, low-frequency response inidcates how well a particular audio component produces low audible frequencies and if it alters the signal on its way through. The Beats Studio Buds's highest frequency is at 20,000Hz, high-frequency response measures if and how well a particular audio component produces high human frequencies and if it makes any adjustments to the signal while at it.

The sound pressure level, is the level of pressure of sound, in decibels, dB, Beats Studio Buds's measurement is 100.5dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source. Beats Studio Buds's battery life is 8 hours, these last longer than 5 hours of listening which is considered average for a single charge.

A device's battery life is usually given by the manufacturer, and with more battery hours, you get to use it for longer and requires fewer chargings. This is given by the vendor, and the Beats Studio Buds's case is said to have a full charge of 16 hours. A charging case with more battery hours allows you to recharge your earbuds on the go several times before having to recharge the case itself.

It takes 1.5 hours to fully charge the Beats Studio Buds's battery. It is recommended to fully charge the battery before using the earbuds when they have been in storage for long periods. Beats Studio Buds have a battery level indicator, an indicator notifies you when the earbuds has a low battery.

Its lights indicate the charging state of your earbuds and charging case. Beats Studio Buds use USB TYPE-C, an industry-standard connector for transmitting both data and power in a single cable. Beats Studio Buds have Bluetooth version of 5.2, Bluetooth is a wireless technology standard that allows data transfers between devices placed in range, using short-wavelength, ultra-high frequency radio waves.

Beats Studio Buds have a 10meters distance to connect via Bluetooth. Beats Studio Buds support AAC, a codec that is used for Bluetooth audio. It supports 24-bit audio at 250kbps.

Because it uses psychoacoustic modeling, it provides better results than other codecs at the same bit rate.

Since its the highest quality codec that any Bluetooth-supporting Apple product supports, the Beats Studio Buds will work well with your iPad. If you are planning on using these with Android , ensure that they also support aptX HD, LDAC, or LHDC as well.

Beats Studio Buds have 6 microphones. The Beats Studio Buds use a noise-canceling microphone, these microphones are made to filter out noise from the earbuds' sound. Beats Studio Buds support ambient sound mode, which uses microphones to channel ambient sound to still be heard even when wearing the earbuds When misplaced in a room, or can't be found in your bag, the Beats Studio Buds support the find earbuds feature.

The Beats Studio Buds support fast charging. Commonly, technologies like MediaTek’s Pump Express, are used to lower the time it takes to fully charge a device. The Beats Studio Buds have a multipoint of 2 connections, this feature allows you to link to more than one Bluetooth device and switch between them.

Say, you can easily switch calls from one device to another without manually disconnect and reconnect. Beats Studio Buds have a mute function, they have the option to mute/unmute a conversation directly from the earbuds. With the Beats Studio Buds, so you can access the volume control, pause, play, mute, etc whichever features are supported on the earbuds.

Beats Studio Buds support voice prompts. Automatically receive information via audio messages, say if there is a problem with the connection. The Beats Studio Buds come with their own special pouch.

Carrying earbuds openly, or putting them inside your bag without a cover can easily damage them.