IP ratings refer to the rating of protection given by an enclosure, against solids and liquids. The letters 'IP' are followed by two values The first value of the IP rating refers to protection against solids such as dust, while the second refers to protection against liquids (water).
Having a value of IPX4, the Beats Studio Buds's rating is read as, the first number of X denotes that no data available to specify a protection rating, and the second value of 4 means that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes. The Beats Studio Buds have a weight of 5.1g . We take in account a lower weight better because lighter devices are more comfortable to move with.
For a device to be true wireless it must have no cables linking any part of the device together, Beats Studio Buds are true wireless for this matter since they don't have cables. This is a key difference since wireless earbuds have wires linking the two earbuds .
Beats Studio Buds have sweat resistance
Beats Studio Buds have stereo speakers, devices with stereo speakers deliver sound from separate channels on both left and right sides, creating a richer sound and a better listening experience. Active noise cancellation uses advanced kind of tech to reduce ambient sounds.
How it works, it studies the sound pattern outside and inside the earbud and then inverts the soundwaves to counter it. In simple terms, it's like having +1 (sound from your surrounding) then adding -1 (inverted noise) giving 0 resulting in a reduced level of noise.
The Beats Studio Buds have ANC enabling you to listen at lower volume levels, causing less ear fatigue as you don't need to crank up the device volume to overcome background sounds.
The Beats Studio Buds sit tightly in place, this creates an acoustic seal that reduces your environment noise while preventing the earbuds voice audio from leaking out at the same. The Beats Studio Buds have a unit size of 8.2mm in diameter, bigger drivers are more powerful, and can produce better bass. The driver unit is the component that makes sound in the earbuds, its size determines the sound produced by the device.
The Beats Studio Buds's lowest frequency is at 20Hz, low-frequency response measures if and how well an audio component produces low audible frequencies and if it alters the signal while at it. The Beats Studio Buds's highest frequency is at 20,000Hz, high-frequency response measures if and how well an audio device makes high audible frequencies and if it changes to the signal while at it. The sound pressure level, is the pressure level of sound, in decibels, dB, Beats Studio Buds's measurement is 100.5dB/mW.
Devices with a higher sound pressure level are generally louder when supplied with any given audio source. The Beats Studio Buds's battery life is 8 hours, these last longer than 5 hours of listening which is considered average for a single charge. A device's battery life is usually given by the manufacturer, and with more battery hours, you get to use it for longer and requires fewer chargings.
The battery life of the charging case is given by the vendor, and Beats Studio Buds's case has a charge of 16 hours. A charging case with a longer battery life allows you to recharge your earbuds on the go several times before having to recharge the case itself. It requires 1.5 hours to fully charge the Beats Studio Buds's battery.
It is highly adivsable to charge fully the battery before using the earbuds when they have been unused for extended periods. The Beats Studio Buds have a battery level indicator, an indicator alerts you when the earbuds has a low battery. The battery indicator lights indicate the charging status of your device and case.
The Beats Studio Buds use USB TYPE-C, an industry-standard connector for transmitting both data and power through a single cable. The Beats Studio Buds have Bluetooth version of 5.2, Bluetooth is a wireless technology standard that enables data transfers between devices placed in range, using short-wavelength, ultra-high frequency radio waves. Beats Studio Buds have a 10meters distance connecting via Bluetooth.
Beats Studio Buds support AAC, a codec that is used for Bluetooth audio. It supports 24-bit audio at 250kbps. Because it uses psychoacoustic modeling, it can provide better results than other codecs at a similar bit rate.
Since its the highest quality codec that any Bluetooth-supporting Apple product supports, the Beats Studio Buds will work fine with your MacBook. If you intend on using these with Android , ensure that they also support aptX HD, LDAC, or LHDC as well. The Beats Studio Buds have 6 microphones.
The Beats Studio Buds use a noise-canceling microphone, these microphones are intended to filter out noise from the desired sound. The Beats Studio Buds support ambient sound mode, which uses microphones to pass through ambient sound so that they can still be heard even when wearing the earbuds
When misplaced in a room, or can't be found in your bag, Beats Studio Buds have a find earbuds feature. The Beats Studio Buds support fast charging.
Commonly, technologies like MediaTek’s Pump Express, are used to lower the amount of time it takes to charge the earbuds. The Beats Studio Buds support multipoint of 2 connections, the multipoint feature allows you to link to more than one Bluetooth device and switch between them. Say, you can switch calls from one device to another without having to manually disconnect and reconnect.
Beats Studio Buds have a mute function, they support the feature to mute/unmute a conversation directly from the device. The Beats Studio Buds, so you can easily access the volume control, pause, play, mute, etc whichever functions are supported on the device. Beats Studio Buds support voice prompts.
Automatically receive information via audio messages, like if there is an issue with the connection. The Beats Studio Buds come with their own special pouch. Carrying earphones without a case, or putting them inside your bag without a casing can easily damage them.
