Beats Studio Pro have a weight of 260g, these weigh below 320g, which we consider as the highest average a headphone should weigh for comfort during long use. We take in account a lower weight best for the reason that lighter devices are more comfortable to carry. JBL Tune 520BT, at 160g
weigh less than the Beats Studio Pro by -100g
Beats Studio Pro are foldable, which makes them more portable.
Foldable headphones are easier to transport and take up less storage space. The JBL Tune 520BT too can fold up, foldable headphones can reduce their size by 60% to 70% when folded. Over-ear headphones have larger earpads that fit around your entire ear Beats Studio Pro have a comfortable full-size form with earcups that fully enclose your ears.
This design is loved for its increased sound isolation and the fact that it won't leak sound to your neighbors. Beats Studio Pro have stereo speakers, what this means is that Beats Studio Pro's speakers deliver sound from separate channels on both left and right sides, creating a richer sound and a better listening experience. Both JBL Tune 520BT and Beats Studio Pro have stereo speakers
Active noise cancellation uses more advanced technology to actively counter noise.
How it works, it listens to the sound pattern outside and inside the earbud and then inverts the soundwaves to cancel it out. In simple terms, it's like taking +1 outside (noise from your surrounding) and adding -1 inside (counter sound within the device) to make zero resulting in a reduced level of noise.
Beats Studio Pro allow you to listen at lower volume levels, causing less ear fatigue as you don't have to crank up the volume to overcome background noise.
Passive Noise Cancellation uses well-designed ear cups to seal out unwanted noise. This is used for both in-ear earphones and over-ear headphones where the headphone itself will keep surrounding noise out. The Beats Studio Pro sits tightly in place, creating an acoustic seal that reduces background noise and prevents your music from leaking out.
Both of these devices have passive noise reduction which means that also the JBL Tune 520BT isolates you from ambient noise instead of actively using technology to cancel it out. Low-frequency response measures if and how well an audio device reproduces low audible frequencies and if it makes any changes to the signal while at it. Beats Studio Pro's lowest frequency is at 20Hz, the lower the low-frequency response, the stronger and juicier the bass.
JBL Tune 520BT's lowest frequency is at 20Hz, this implies that
both devices produce equal bass
High frequency response measures if and how well an audio device reproduces high audible frequencies and if it changes to the signal while at it. Beats Studio Pro's highest frequency is at 20,000Hz, the higher the high-frequency response, the clearer and crispier the treble. JBL Tune 520BT's highest frequency is at 20,000Hz, this means that
both devices produce equal treble
The driver unit is basically a mini speaker that produces sound in the device, its size dictates the loudness of the headphone.
Beats Studio Pro driver unit is 40mm in diameter, bigger drivers are more powerful and can produce better bass. JBL Tune 520BT driver unit is 30mm in diameter,
which means that they have a smaller driver unit than that of Beats Studio Pro by 10mm
, as many tend to believe that driver units of a bigger size automatically produce better sound quality.
However, large drivers usually have difficulty reproducing high frequencies so yes, larger drivers can generate louder sound, but this does not mean that they produce better sound.
Neodymium magnets if used in audio devices produce a higher sensitivity and substantial sound output using less power to do so. They can help produce music at quite a high sound pressure level, SPL, with the use of high magnetic flux. The Beats Studio Pro have this type of magnet.
If your headphones play wirelessly, cancel ambient noise, or enhance your listening experience with active features, their battery life will reduce over time. The device's battery life is given by the manufacturer, with longer battery life, you get to use it for longer and have to charge the device less often. Beats Studio Pro's battery life is 40 hours
JBL Tune 520BT's battery life is 57 hours.
Each time you recharge your headphones, they get a little less listening time. The effect is barely noticeable at first. But over a few years, you may find that your device, no longer plays for long like it used to.
It takes 2 hours to fully charge the Beats Studio Pro's battery. It is recommended to fully charge the battery before using the headphones for the first time or when they have been unused for extended periods. JBL Tune 520BT takes 2 hours to fully charge the battery
Beats Studio Pro have a battery level indicator, an indicator shows you when the device has a low battery.
The battery indicator lights show the charging status of your headphones. JBL Tune 520BT too have a battery level indicator, charging indicators allow you to determine the charging state of your headphones, whether fully charged, or the battery is running low. A rechargeable battery is a type of electrical battery that can be charged, discharged into a load, and recharged many times, as opposed to a disposable or primary battery, which is supplied fully charged and discarded after use.
Beats Studio Pro's battery can be recharged and used over again. The JBL Tune 520BT too have a rechargeable battery. Beats Studio Pro can be used wirelessly, wireless devices allow you more freedom of movement.
The JBL Tune 520BT also can be used wirelessly
2.4GHz wireless is used for devices such as headsets such as the Beats Studio Pro, keyboards, and mice similar to Bluetooth but with a proprietary radio frequency. It typically offers better performance than Bluetooth, with low latency and good stability. Bluetooth is a wireless technology standard that allows data transfers between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves.
Beats Studio Pro has a v5.3
JBL Tune 520BT has a Bluetooth version of v5.3. Newer versions provide faster data transfers. Beats Studio Pro support USB TYPE-C, an industry-standard connector for transmitting both data and power on a single cable.
The USB-C plug is now part and parcel of most current laptops, phones, and tablets, it features reversible plug orientation and cable direction. JBL Tune 520BT too have USB TYPE-C
Beats Studio Pro support AAC, a codec that is used for Bluetooth audio. It supports 24-bit audio at 250kbps.
Because it uses psychoacoustic modeling, it can provide better results than other codecs at a similar bit rate. The JBL Tune 520BT support AAC as well. Designed to be the successor of the MP3 format, AAC generally achieves higher sound quality than MP3 encoders at the same bit rate.
Bluetooth is a short-range wireless technology standard that is used for exchanging data between fixed and mobile devices over short distances. The Beats Studio Pro can connect at a 10meters distance via Bluetooth or infrared to another device. The JBL Tune 520BT can connect at a 10meters distance via Bluetooth
Beats Studio Pro have only 3 microphones, more microphones result in better sound quality and enable the device to filter out background noise.
The JBL Tune 520BT microphones are only 2. Beats Studio Pro use a noise-canceling type of microphone, these microphones are designed to filter out background noise from the desired sound. Especially useful in noisy environments.
Beats Studio Pro have a mute function, they have an option to mute/unmute a conversation directly from the device. The mute function means that you unilaterally turn off the microphone, but you can still hear the other party's voice. Beats Studio Pro support multipoint, which allows you to link to more Bluetooth devices and switch between them.
For example, you can easily switch calls from one device to another without having to manually disconnect and reconnect. The JBL Tune 520BT support multipoint count. Bluetooth multipoint would come in handy because you can be on one call without missing notifications coming from another device.
There is a control panel on the Beats Studio Pro body, so you can easily access the volume control or remote without having to interact with a cable or another device it's connected to. The JBL Tune 520BT too have a control panel on them. Beats Studio Pro can be used as a headset.
A headset is one headphone or pair with a built-in microphone. Headsets can be used for apps that require communication i.e. Zoom, Google Meet, Skype, games with voice chat, mobile phones, etc.
JBL Tune 520BT can be used as a headset. since they have a built-in microphone
Carrying headphones without a case, or putting them in bags without a casing can easily put them at risk of getting damaged. The Beats Studio Pro come with their own special case or pouch, which is useful for safe transportation.
