Has Active Noise Cancellation (Anc)
Beats Studio3 Wireless
✓
Sennheiser HD 560S ✗
Active noise cancellation uses more advanced technology to reduce unwanted ambient sounds. How it works, it detects and analyzes the sound pattern of incoming noise and then generates a mirror signal to cancel it out. In simple terms, it's like taking +1 outside (noise from your surrounding) and adding -1 inside (counter sound within the device) to make zero resulting in a reduced level of noise.
Beats Studio3 Wireless allow you to listen at lower volume levels, causing less ear fatigue as you don't have to crank up the volume to overcome background noise.
Has Passive Noise Reduction
Beats Studio3 Wireless
✓
Sennheiser HD 560S ✓
Passive Noise Cancellation uses well-designed ear cups to seal out unwanted noise. This is used for both in-ear earphones and over-ear headphones where the headphone itself will keep surrounding noise out.
The Beats Studio3 Wireless sits tightly in place, creating an acoustic seal that reduces background noise and prevents your music from leaking out.
Both of these devices have passive noise reduction which means that also the Sennheiser HD 560S isolates you from ambient noise instead of actively using technology to cancel it out.
Lowest Frequency
Beats Studio3 Wireless
20Hz
Sennheiser HD 560S 6Hz
Low-frequency response measures if and how well a particular audio component reproduces low audible frequencies and if it makes any changes to the signal while at it. Beats Studio3 Wireless's lowest frequency is at 20Hz, the lower the low-frequency response, the stronger and juicier the bass.
Sennheiser HD 560S's lowest frequency is at 6Hz, this implies that
Beats Studio3 Wireless got a juicier bass than the Sennheiser HD 560S
Highest Frequency
Beats Studio3 Wireless
20000Hz
Sennheiser HD 560S 38000Hz
High frequency response measures if and how well a particular audio component reproduces high audible frequencies and if it changes to the signal on the way through. Beats Studio3 Wireless's highest frequency is at 20000Hz, the higher the high-frequency response, the clearer and crispier the treble.
Sennheiser HD 560S's highest frequency is at 38000Hz, this means that
Sennheiser HD 560S got a clearer and crispier treble than the Beats Studio3 Wireless
Sound Pressure Level
Beats Studio3 Wireless
114dB/mW
Sennheiser HD 560S 110dB/mW
Sound pressure is the average variation in atmospheric pressure caused by the sound, the sound level .i.e how loud something is can be perceived differently by different people so we need to have the means to get an objective measurement of sound level expressed in numerical terms.
The sound pressure level, SPL, is the pressure level of a sound, measured in decibels, dB, Beats Studio3 Wireless's measurement is 114dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
Sennheiser HD 560S's sound pressure level measurement is 110dB/mW.
Driver Unit Size
Beats Studio3 Wireless
✗
Sennheiser HD 560S 38mm
The driver unit is the component that produces sound in the device, its size dictates the loudness of the headphone. Sennheiser HD 560S driver unit is 38mm in diameter, bigger drivers are more powerful and can produce better bass.
Impedance
Beats Studio3 Wireless
32Ohms
Sennheiser HD 560S 120Ohms
Defined as the device's resistance to the electromagnetic current, as electricity flows through a conductor, it experiences electrical resistance that counters the flow of current. The resistance of a conductor is measured in ohms. Beats Studio3 Wireless's impedance is 32Ohms, the lower the impedance, the easier it is to get higher volume and requires less power.
Sennheiser HD 560S's impedance is 120Ohms. The impedance of earbuds is the electrical resistance of the driver unit present on the inside.
A Review By Comparison Of The Edifier W820Bt Vs. Beats Studio3 Wireless
A Review By Comparison Of The Bang & Olufsen Beoplay H95 Vs. Beats Studio3 Wireless
A Review By Comparison Of The Sony Wh Xb910N Vs. Beats Studio3 Wireless