Overall Score 5.1 Represents average audio ecosystem compatibility score.
Overall Score 4.5 Represents average audio ecosystem compatibility score.
Category | Features | JBL Endurance Peak | BLX Earbuds Gen 2 |
---|---|---|---|
DESIGN | ingress protection (ip) rating | ipX7 | ipX3 |
weight | 30g | 43.94g | |
has no wires or cables | ✓ | ✗ | |
wingtips included | ✓ | ✗ | |
sweat resistance | ✓ | ✓ | |
is dust proof and water-resistant | ✓ | ✗ | |
has an earbud foam | ✓ | ✗ | |
has stereo speakers | ✓ | ✓ | |
SOUND QUALITY | has active noise cancellation (noise control) | ✓ | ✗ |
has passive noise reduction | ✗ | ✓ | |
driver unit size | 10mm | ✗ | |
lowest frequency | 16hz | 20hz | |
highest frequency | 22,000hz | 20,000hz | |
POWER | battery life | 4hours | 6hours |
battery life of charging case | 24hours | 15hours | |
charge time | 2hours | 1.2hours | |
battery power | 75mah | ✗ | |
has a battery level indicator | ✓ | ✓ | |
CONNECTIVITY | has usb type-c | ✗ | ✓ |
bluetooth version | v4.2 | v5.1 | |
maximum bluetooth range | 10meters | 10meters | |
has aac | ✗ | ✓ | |
MICROPHONE | number of microphones | 1only | 2only |
EXTRAS | has in/on-ear detection | ✗ | ✓ |
supports fast charging | ✗ | ✓ | |
control panel placed on a device | ✓ | ✓ | |
warranty period | 1years | ✗ | |
has voice prompts | ✓ | ✓ | |
travel bag is included | ✓ | ✓ | |
See price on Amazon | See price on Amazon |
IP ratings is the rating of protection given by a casing, against solids and liquids. The letters 'IP' are followed by two values The first value means protection against solids say dust, followed by the one that refers to resistance against liquids (water).
Scoring IPX3, the BLX Earbuds Gen 2's rating is read as, the first value of X denotes that no data available to specify a protection rating, and of liquids that they can withstand low pressure spray similar to that of a shower head when tilted at up to 60° from vertical position for ten minutes.
In comparison to the BLX Earbuds Gen 2, JBL Endurance Peak have a rating of IPX7 meaning that
we are not yet certain of their rating with solids (dust)
and that of liquids is that,
JBL Endurance Peak has a higher liquid rating than BLX Earbuds Gen 2
The BLX Earbuds Gen 2 have a weight of 43.94g . We take in account a lower weight best for the reason that lighter devices are easier to move with.
The JBL Endurance Peak, at 30g
are lighter than the BLX Earbuds Gen 2 by -13.94g
True wireless devices have no cables linking any part of the device together, JBL Endurance Peak are true wireless for this case since they don't have cables. This is a major difference as some wireless earbuds have wires linking the 2 earbuds .
JBL Endurance Peak have wingtips, these are commonly used for workout earbuds and are usually an optional add-on to each silicone ear tip for a more secure fit.
BLX Earbuds Gen 2 are resistant to sweat
JBL Endurance Peak's resistance to sweat makes both devices good for use during long-distance running, marathons, cardio sweat workouts , etc
JBL Endurance Peak are both dustproof and water-resistant.
An earbud foam is designed to be ultracompact and lightweight, with little interference with earrings, spectacles, hats, or hairstyles. The JBL Endurance Peak have an earbud foam for some people it is more comfortable than the in-ear foam.
BLX Earbuds Gen 2 have stereo speakers, what this means is that BLX Earbuds Gen 2's speakers deliver sound from separate channels on both left and right sides, this creates a richer sound and a better listening experience.
Both JBL Endurance Peak and BLX Earbuds Gen 2 have stereo speakers
ANC makes use of advanced technology to reduce ambient sounds. ANC works when, it listens to the sound pattern of incoming noise and after generates a mirror signal to cancel it out. In simple terms, it's like having +1 (sound from your surrounding) then adding -1 (inverted noise) giving 0 which results in a reduced level of noise.
The JBL Endurance Peak have ANC allowing you to listen at lower volume levels, causing less ear fatigue as you don't need to crank up the earbuds volume to outcompete background sounds.
The BLX Earbuds Gen 2 sit tightly in place, creating an acoustic seal that tones down your environment sounds while preventing the device music from leaking out at the same.
The JBL Endurance Peak driver unit is 10mm in diameter, bigger drivers are more powerful, therefor producing better bass. The driver unit is the component that produces sound in the device, its size determines the sound made by the earbuds.
The BLX Earbuds Gen 2's lowest frequency is at 20Hz, low-frequency response inidcates how well an audio component generates low audible frequencies and if it alters the signal on its way through.
JBL Endurance Peak's lowest frequency is at 16Hz, this implies that
JBL Endurance Peak produce a juicier bass than the BLX Earbuds Gen 2
The BLX Earbuds Gen 2's highest frequency is at 20,000Hz, high-frequency response measures if and how well an audio device produces high recognizable frequencies and if it makes any changes to the signal while at it.
JBL Endurance Peak's highest frequency is at 22,000Hz, this means that
JBL Endurance Peak generate a clearer and crispier treble than the BLX Earbuds Gen 2
BLX Earbuds Gen 2's battery life is 6 hours, these last longer than 5 hours of listening which is considered average for a single charge. A device's battery life is commonly given by the manufacturer, and with more battery hours, you get to use it for longer and requires fewer chargings.
JBL Endurance Peak's battery life is
less than that of BLX Earbuds Gen 2 by 2 hours
. Every time you recharge your earbuds, they get a little less playing time. The effect is not noticeable at first, but over a few years, your wireless earbuds will have shorter listening time.
The battery life of the charging case is given by the manufacturer, and BLX Earbuds Gen 2's case is said to have a full charge of 15 hours. A charging case with more battery hours enables you to recharge your earbuds on the go several times before recharging the case itself.
JBL Endurance Peak's charging case has a battery life of 24 hours,
more than that of BLX Earbuds Gen 2 by 9 hours
It requires 1.2 hours to fully charge the BLX Earbuds Gen 2's battery. It is recommended to fully charge the battery before using the earbuds for the first time.
JBL Endurance Peak takes 2 hours to fully charge the battery,
more than that of BLX Earbuds Gen 2 by 0.8 hours
JBL Endurance Peak's battery capacity is 75mAh, battery power, shows the amount of electrical energy that a battery can store.
The BLX Earbuds Gen 2 have a battery level indicator, an indicator notifies you when the earbuds has a low battery. The battery indicator lights display the charging status of your earbuds and charging case.
JBL Endurance Peak too have a battery level indicator, charging indicators enable you to tell the charging state of your earbuds, if charged fully, or having a low battery.
The BLX Earbuds Gen 2 use USB TYPE-C, a standard connector for transmitting both data and power through a single cable.
The BLX Earbuds Gen 2 have Bluetooth version of 5.1, Bluetooth is a wireless technology standard that enables data movement between devices placed in range, using short-wavelength, ultra-high frequency radio waves.
JBL Endurance Peak has a Bluetooth version of 4.2,
older than that of BLX Earbuds Gen 2
. Newer versions provide faster data transfers.
The BLX Earbuds Gen 2 have a 10meters distance connecting via Bluetooth.
JBL Endurance Peak have a maximum range of 10meters,
equal to that of the BLX Earbuds Gen 2
BLX Earbuds Gen 2 support AAC, a codec used for Bluetooth audio. It supports 24-bit audio at 250kbps. Because it uses psychoacoustic modeling, it provides better results than other codecs at the same bit rate.
Since its the highest quality codec that any Bluetooth-supporting Apple product supports, the BLX Earbuds Gen 2 will work fine with your iPad. If you are planning on using these with Android , ensure that they also support aptX HD, LDAC, or LHDC as well.
BLX Earbuds Gen 2 have 2 microphones.
The JBL Endurance Peak microphones are 1,
less than that of BLX Earbuds Gen 2 by 1
. More microphones record better sound quality and enable the device to filter out background sounds.
BLX Earbuds Gen 2 support in/on-ear detection, the sensors in the device can detect when removed from your ears so that the music is paused.
BLX Earbuds Gen 2 support fast charging. Most often, technologies like MediaTek’s Pump Express, are used to reduce the time it takes to charge a device.
The BLX Earbuds Gen 2, so you can easily access the volume control, pause, play, mute, etc whichever functions are supported on the earbuds.
JBL Endurance Peak too have a control panel on them.
The JBL Endurance Peak have a warranty period of 1 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use that has followed instruction manuals.
The BLX Earbuds Gen 2 have voice prompts. Automatically receive information via audio messages, like if there is an issue with the connection.
The JBL Endurance Peak too support voice prompts .i.e the device will notify you if the battery is low, and you need to recharge them.
BLX Earbuds Gen 2 come with their own special pouch. Carrying earbuds openly, or placing them in your pockets without a casing can easily damage them.
JBL Endurance Peak also have a travel bag included, which offers safe transportation.