Overall Score 6.4 Represents average audio ecosystem compatibility score.
Overall Score 4.3 Represents average audio ecosystem compatibility score.
Ingress protection ratings refer to the level of protection offered by an enclosure, against solids and liquids. The letters 'IP' are followed by two values The first value of the IP rating means protection against solids say dust, while the second refers to protection against liquids (sweat).
Scoring IPX4, the BLX Earbuds's rating for solids indicates that no data available to specify a protection rating, and of liquids that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes.
Compared to the BLX Earbuds, JEET W1S have a rating of IPX5 meaning that
we are not yet certain of their rating with solids (dust)
and that of liquids is that,
JEET W1S has a higher liquid rating than BLX Earbuds
BLX Earbuds have a weight of 44.5g . We consider a lower weight better because lighter devices are easier to move with.
JEET W1S, at 18g
weigh less than the BLX Earbuds by -26.5g
True wireless devices have no cables linking any part of the device together, BLX Earbuds are true wireless for this matter since they don't have cables. This is an important difference since wireless earbuds have cables linking the pair of earbuds together.
The JEET W1S come with wingtips, these are commonly used for workout earbuds and come as an optional add-on to each silicone ear tip for a more secure fit.
BLX Earbuds are resistant to sweat
JEET W1S's resistance to sweat makes both devices fit for use during long-distance running, marathons, training in workout bodysuits, etc
BLX Earbuds have stereo speakers, devices with stereo speakers deliver sound from independent channels on both left and right sides, creating a richer sound and a better listening experience.
The JEET W1S also have stereo speakers
The BLX Earbuds stay tightly in place, creating a sound seal that tones down your environment noise well as preventing the earbuds sound from leaking out at the same.
Both JEET W1S, and BLX Earbuds have passive noise reduction which implies that they tone down ambient noise without using technology to cancel it out.
JEET W1S have a unit size of 11mm in diameter, bigger drivers are more powerful, therefor producing better bass. The driver unit is basically a mini speaker that makes sound in the earbuds, the unit size determines the sound produced by the device.
The BLX Earbuds's lowest frequency is at 20Hz, low-frequency response measures if and how well an audio device generates low audible frequencies and if it alters the signal while at it.
JEET W1S's lowest frequency is at 20Hz, this means that
both devices produce equal bass
The BLX Earbuds's highest frequency is at 20000Hz, high-frequency response tells how well a particular audio device generates high recognizable frequencies and if it changes to the signal on its way through.
JEET W1S's highest frequency is at 20000Hz, this means that
both devices produce equal treble
The sound pressure level, is the level of pressure of sound, measured in decibels, dB, JEET W1S's measurement is 93dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
The BLX Earbuds's battery life is 4.5 hours, a device's battery life is commonly given by the manufacturer, and with more battery hours, you get to use it for longer and have to charge the device less often.
JEET W1S's battery life is
more than that of BLX Earbuds by 6.5 hours
. Every time you recharge your device, they get a little less playing time. The effect is not noticeable at first, but over time, your wireless earbuds will no longer play for long like they used to.
The battery life of the charging case is given by the vendor, and BLX Earbuds's case is said to have a charge of 13.5 hours. A charging case with more battery hours enables you to recharge your earbuds on the go several times before recharging the case itself.
It takes 1 hours to fully charge the BLX Earbuds's battery. It is highly adivsable to fully charge the battery before using the earbuds when they have been unused for long periods.
BLX Earbuds's battery power is 40mAh, battery capacity, shows the amount of electrical energy that a battery can store.
BLX Earbuds have a battery level indicator, an indicator alerts you when the earbuds has a low battery. Its lights indicate the charging state of your device and case.
JEET W1S too have a battery level indicator, charging indicators allow you to tell the charging state of your earbuds, if charged fully, or the battery is running low.
The BLX Earbuds have Bluetooth version of 5.1, Bluetooth is a wireless technology standard that allows data transfers between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves.
JEET W1S has a Bluetooth version of 4.1,
older than that of BLX Earbuds
. Newer versions provide faster data transfers.
The BLX Earbuds have a 10meters distance connecting via Bluetooth.
JEET W1S have a maximum range of 10meters,
equal to that of the BLX Earbuds
JEET W1S support AAC, a codec that is used for Bluetooth audio. It supports 24-bit audio at 250kbps. Since it uses psychoacoustic modeling, it provides better results than other codecs at a similar bit rate.
Since its the highest quality codec that any Bluetooth-supporting Apple product supports, the JEET W1S will work well with your iPad. If you intend on using these with Android you need to pay even closer attention to codec support for if they only have AAC they won't provide the best audio quality possible, ensure that they also support aptX HD, LDAC, or LHDC as well.
JEET W1S support LDAC, a codec developed by Sony which allows streaming high-resolution audio over Bluetooth connections at up to 990 kbps at 32 bit/96 kHz. It can reach a high bitrate of 990kbps, providing high-resolution audio.
JEET W1S support APTX Adaptive, an audio codec for Bluetooth devices that are developed by Qualcomm. It has a variable bit rate (between 279kbps and 420kbps).
JEET W1S support APTX Low Latency, a codec developed by Qualcomm. It uses Bluetooth 5.0 technology to provide low latency audio (around 40ms), which is useful when you want to avoid audio lag for example when playing games.
The JEET W1S support APTX HD, an audio codec for Bluetooth devices that are developed by Qualcomm. It supports high-quality 24-bit audio (at a bit rate of 576kbps).
Latency refers to the time it takes for the audio signal to be transmitted to your earbuds. JEET W1S have a latency of 88ms, a lower latency reduces audio lag and is particularly important when playing games or watching videos.
BLX Earbuds have 2 microphones.
While the JEET W1S microphones are 1,
less than that of BLX Earbuds by 1
. More microphones result in better sound quality and enable the device to filter out background sounds.
JEET W1S support ambient sound mode, which uses microphones to channel ambient noises to still be heard even when wearing the earbuds
The JEET W1S support in/on-ear detection, the sensors in the earbuds can detect when removed from your ears so that the music is paused.
When lost in a room, or can't easily find them in your bag, JEET W1S have a find earbuds feature.
The JEET W1S support fast charging. Most often, technologies like MediaTek’s Pump Express, are used to lower the time it takes to fully charge a device.
BLX Earbuds support multipoint of 1 connections, this feature allows you connect to more than one Bluetooth device and switch between them. For example, you can easily switch calls from one device to another without having to manually disconnect and reconnect.
The JEET W1S have a mute function, they have the feature to mute/unmute a conversation directly from the earbuds.
With the BLX Earbuds, so you can easily access the volume control, pause, play, mute, etc whichever features are supported on the earbuds.
JEET W1S too have a control panel on them.
JEET W1S have a warranty period of 1 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use following instruction manuals.
The BLX Earbuds support voice prompts. Automatically receive information through audio messages, like if there is an issue with the connection.
JEET W1S too support voice prompts .i.e the device notifies you if the battery is running low, and you need to recharge them.
BLX Earbuds come with a special case. Carrying earbuds without a case, or placing them inside your pockets without a casing may easily put them at risk of getting damaged.
JEET W1S also have a travel bag included, which offers safe transportation.