JLab Go Air
See price on AmazonOverall Score 4.9 Represents average audio ecosystem compatibility score.
IP ratings refer to the rank of protection given by an enclosure, against solids and water. The letters 'IP' are followed by two values The first value of the IP rating refers to protection against solids such as dust, followed by the one that refers to protection against liquids (sweat).
Scoring IP44, the JLab Go Air's rating for solids indicates that they are protected against objects greater than 1.0mm such as wire, and the second value of 4 means that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes.
JLab Go Air have a weight of 10g . We take in account a lower weight better for the reason that lighter devices are more comfortable to carry.
True wireless devices have no wires linking any part of the device together, JLab Go Air are true wireless for this case since they don't have wires. This is a key distinction as some wireless earbuds have wires connecting the pair of earbuds together.
JLab Go Air have sweat resistance
JLab Go Air have stereo speakers, what this means is that JLab Go Air's speakers deliver sound from separate channels on both left and right sides, creating a richer sound and a better listening experience.
JLab Go Air sit tightly in place, creating a sound covering that tones down your environment noise well as preventing the device music from leaking out .
The JLab Go Air have a unit size of 8mm in diameter, bigger drivers are more powerful, therefor producing better bass. The driver unit is the component that produces sound in the earbuds, its size determines the sound produced by the earbuds.
JLab Go Air's lowest frequency is at 20Hz, low-frequency response inidcates how well an audio component generates low recognizable frequencies and if it makes any changes to the signal on its way through.
JLab Go Air's highest frequency is at 20,000Hz, high-frequency response indicates how well an audio device generates high audible frequencies and if it changes to the signal while at it.
SPL, is the pressure level of sound, measured in decibels, dB, JLab Go Air's measurement is 103dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
JLab Go Air have neodymium magnets, if used in earbuds produce a higher sensitivity and substantial sound output using less power to do so. They can help generate music at quite a high sound pressure level, with the use of high magnetic flux.
The JLab Go Air's battery life is 5 hours, these last less than 5 hours of listening which is considered average for a single charge. A device's battery life is usually given by the manufacturer, and with longer battery life, you get to use it for longer and have to charge the device less often.
The battery life of the charging case is given by the manufacturer, and JLab Go Air's case is said to have a charge of 15 hours. A charging case with a longer battery life enables you to recharge your earbuds on the go multiple times before recharging the case itself.
It requires 1.5 hours to fully charge the JLab Go Air's battery. It is highly adivsable to fully charge the battery before using the earbuds for the first time.
JLab Go Air's battery capacity is 43mAh, battery power, represents the amount of electrical energy that a battery can store.
JLab Go Air have a battery level indicator, an indicator alerts you when the device has a low battery. Its lights indicate the charging state of your device and case.
The JLab Go Air have Bluetooth version of 5, Bluetooth is a wireless technology standard that enables data movement between devices placed in range, using short-wavelength, ultra-high frequency radio waves.
JLab Go Air have a 10meters distance connecting via Bluetooth.
JLab Go Air have 2 microphones.
JLab Go Air microphone sensitivity is measured at -38dBV/Pa. The amount of the analog or digital output signal from the microphone with its input stimulus is a measure of its sensitivity. It's the 'loudness' of the voice that the microphone can recognize.
With the JLab Go Air, so you can easily access the volume control, pause, play, mute, etc whichever features are supported on the earbuds.
JLab Go Air have a warranty period of 2 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use following instruction manuals.
JLab Go Air have voice prompts. With voice prompts, you receive information through audio messages, say if there is an issue with the connection.