Beats Solo3 Wireless
See price on AmazonOverall Score 5.7 Represents average audio ecosystem compatibility score.
Creative Zen Hybrid 2
See price on AmazonOverall Score 5.1 Represents average audio ecosystem compatibility score.
Category | Features | Beats Solo3 Wireless | Creative Zen Hybrid 2 |
---|---|---|---|
DESIGN | weight | 215g | 287g |
has a detachable cable | ✓ | ✗ | |
can be folded | ✓ | ✓ | |
has a tangle free cable | ✓ | ✗ | |
cable length | 1.3meters | ✗ | |
has an over-the-ear foam | ✗ | ✓ | |
has an on-ear foam | ✓ | ✗ | |
has stereo speakers | ✓ | ✓ | |
SOUND QUALITY | has active noise cancellation (anc) | ✗ | ✓ |
has passive noise reduction | ✓ | ✓ | |
lowest frequency | 20Hz | 20Hz | |
highest frequency | 20,000Hz | 20,000Hz | |
sound pressure level | 100dB/mW | ✗ | |
driver unit size | 40mm | 40mm | |
impedance | 35Ohms | ✗ | |
has a neodymium magnet | ✓ | ✓ | |
POWER | battery life | 40hours | 67hours |
charge time | 2hours | ✗ | |
has a battery level indicator | ✓ | ✓ | |
battery power | 400mAh | 600mAh | |
has a rechargeable battery | ✓ | ✓ | |
CONNECTIVITY | can be used wirelessly | ✓ | ✓ |
uses 2.4ghz wireless | ✓ | ✓ | |
bluetooth version | ✗ | v5.2 | |
has usb type-c | ✓ | ✓ | |
has aac | ✓ | ✓ | |
maximum bluetooth range | 122meters | 10meters | |
has a 3.5mm male connector | ✓ | ✓ | |
MICROPHONE | number of microphones | 2only | 5only |
has a noise-canceling microphone | ✗ | ✓ | |
EXTRAS | has ambient sound mode | ✗ | ✓ |
multipoint count | ✗ | 2only | |
control panel placed on a device | ✓ | ✓ | |
can be used as a headset | ✓ | ✓ | |
warranty period | 1years | ✗ | |
travel bag is included | ✓ | ✗ | |
See price on Amazon | See price on Amazon |
Creative Zen Hybrid 2 have a weight of 287g, these weigh below 320g, which we consider as the highest average a headphone should weigh for comfort during long use.
We prefer a lower weight best because lighter devices are more comfortable to carry.
Beats Solo3 Wireless, at 215g
weigh less than the Creative Zen Hybrid 2 with a difference -72g
Detachable cables are cables that have connectors on both ends. One end goes into your headphone cups, while the other end is inserted into an audio source. Some new headphones, and not just the expensive ones, are coming with detachable cables, Beats Solo3 Wireless are one of those.
Creative Zen Hybrid 2 are foldable, which makes them more portable. Foldable headphones are easier to transport and take up less storage space.
The Beats Solo3 Wireless too can fold up, foldable headphones can reduce their size by 60% to 70% when folded.
Twisted headphone cables can be a great source of annoyance and inconvenience, Beats Solo3 Wireless's cable is designed to minimize tangling. Constant twisting of the cables can also lead to microfractures in the copper wires, affecting sound quality, or completely damaging your headphones.
A long cable ensures more freedom of movement, but remember that every cable based on the conducting material used has a certain amount of parasitic resistance, inductance, and capacitance. How much depends on the length and construction. Beats Solo3 Wireless comes with a 1.3meters cable.
Over-ear headphones have larger earpads that fit around your entire ear Creative Zen Hybrid 2 have a comfortable full-size form with earcups that fully enclose your ears. This design is loved for its increased sound isolation and the fact that it won't leak sound to your neighbors.
On-ear headphones have smaller earpads that sit on top of your ears, this Beats Solo3 Wireless comfortably rests on top of your outer ears. As it doesn't block out everything from the outside world, it's preferred in places like office environments and recommended for outdoor activities.
Creative Zen Hybrid 2 have stereo speakers, what this means is that Creative Zen Hybrid 2's speakers deliver sound from independent channels on both left and right sides, creating a richer sound and a better listening experience.
Both Beats Solo3 Wireless and Creative Zen Hybrid 2 have stereo speakers
Active noise cancellation uses more advanced technology to reduce unwanted ambient sounds. How it works, it listens to the sound pattern outside and inside the earbud and then generates a mirror signal to cancel it out. In simple terms, it's like taking +1 outside (noise from your surrounding) and adding -1 inside (counter sound within the device) to make 0 hence "diluting" the noise.
Creative Zen Hybrid 2 allow you to listen at lower volume levels, causing less ear fatigue as you don't have to crank up the volume to overcome background noise.
Passive Noise Cancellation uses well-designed ear cups to seal out environment noise. This is used for both in-ear earphones and over-ear headphones where the headphone itself will keep surrounding noise out.
The Creative Zen Hybrid 2 sits tightly in place, creating an acoustic seal that reduces background noise and prevents your music from leaking out.
Both of these devices have passive noise reduction which means that also the Beats Solo3 Wireless isolates you from ambient noise instead of actively using technology to cancel it out.
Low-frequency response measures if and how well an audio device reproduces low audible frequencies and if it makes any changes to the signal while at it. Creative Zen Hybrid 2's lowest frequency is at 20Hz, the lower the low-frequency response, the stronger and juicier the bass.
Beats Solo3 Wireless's lowest frequency is at 20Hz, this means that
both devices produce equal bass
High frequency response measures if and how well an audio device reproduces high audible frequencies and if it changes to the signal on the way through. Creative Zen Hybrid 2's highest frequency is at 20,000Hz, the higher the high-frequency response, the clearer and crispier the treble.
Beats Solo3 Wireless's highest frequency is at 20,000Hz, this implies that
both devices produce equal treble
Sound pressure is the average variation in atmospheric pressure caused by the sound, the sound level .i.e how loud something is can be perceived differently by different people so we need to have a way of getting an objective measurement of sound level expressed in numerical terms.
The sound pressure level, SPL, is the pressure level of a sound, measured in decibels, dB, Beats Solo3 Wireless's measurement is 100dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
The driver unit is basically a mini speaker that produces sound in the device, its size dictates the loudness of the headphone. Creative Zen Hybrid 2 driver unit is 40mm in diameter, bigger drivers are more powerful and can produce better bass.
Beats Solo3 Wireless driver unit is 40mm in diameter,
making both Beats Solo3 Wireless, and Creative Zen Hybrid 2 similar in how loud their sound gets
, as many tend to believe that driver units of a bigger size automatically produce better sound quality.
However, large drivers usually have difficulty reproducing high frequencies so yeah, larger drivers are capable of generating louder sound, but this does not mean that they produce better sound.
Impedance is the device's resistance to the electromagnetic current, when electricity flows through a wire, it experiences electrical resistance that counters the flow of current. The resistance of a conductor is measured in ohms. Beats Solo3 Wireless's impedance is 35Ohms, the lower the impedance, the easier it is to get higher volume and requires less power.
Neodymium magnets when used in audio devices produce a higher sensitivity and substantial sound output using less power to do so. They can help produce music at quite a high sound pressure level, SPL, with the use of high magnetic flux. The Creative Zen Hybrid 2 have this type of magnet.
Beats Solo3 Wireless have it too, devices with neodymium magnets are lighter and more powerful than those which use ferrite magnets. It is also known that they have more bass and clear high notes.
If your headphones play wirelessly, cancel ambient noise, or enhance your listening experience with active features, their battery life will reduce over time. The device's battery life is given by the manufacturer, with longer battery life, you get to use it for longer and have to charge the device less often. Creative Zen Hybrid 2's battery life is 67 hours
Beats Solo3 Wireless's battery life is 40 hours. Each time you recharge your headphones, they get a little less listening time. The effect is barely noticeable at first. But over a few years, you may find that your device, no longer plays for long like it used to.
It takes 2 hours to fully charge the Beats Solo3 Wireless's battery. It is recommended to fully charge the battery before using the headphones for the first time or when they have been unused for extended periods.
Creative Zen Hybrid 2 have a battery level indicator, an indicator shows you when the device has a low battery. The battery indicator lights indicate the charging status of your headphones.
Beats Solo3 Wireless too have a battery level indicator, charging indicators allow you to determine the charging state of your headphones, whether fully charged, or the battery is running low.
Battery power, or battery capacity, represents the amount of electrical energy that a battery can store.
Creative Zen Hybrid 2's battery power is 600mAh, more battery power can be an indication of longer battery life.
Beats Solo3 Wireless's battery power is 400mAh.
A rechargeable battery is a type of electrical battery that can be charged, discharged into a load, and recharged many times, as opposed to a disposable or primary battery, which is supplied fully charged and discarded after use.
Creative Zen Hybrid 2's battery can be recharged and used over again.
The Beats Solo3 Wireless too have a rechargeable battery.
Creative Zen Hybrid 2 can be used wirelessly, wireless devices allow you more freedom of movement not restricted by a cable.
The Beats Solo3 Wireless also can be used wirelessly
2.4GHz wireless is used for devices such as headsets such as the Creative Zen Hybrid 2, keyboards, and mice similar to Bluetooth but with a proprietary radio frequency. It typically offers better performance than Bluetooth, with low latency and good stability.
Beats Solo3 Wireless too uses this kind of connectivity, its low-latency, high-quality audio comes along with better battery life.
Bluetooth is a wireless technology standard that allows data transfers between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves. Creative Zen Hybrid 2 has a v5.2
Creative Zen Hybrid 2 support USB TYPE-C, an industry-standard connector for transmitting both data and power on a single cable. The USB-C plug is now part and parcel of most current laptops, phones, and tablets, it features reversible plug orientation and cable direction.
Beats Solo3 Wireless too have USB TYPE-C
Creative Zen Hybrid 2 support AAC, a codec that is used for Bluetooth audio. It supports 24-bit audio at 250kbps. Because it uses psychoacoustic modeling, it can provide better results than other codecs at a similar bit rate.
The Beats Solo3 Wireless support AAC as well. Designed to be the successor of the MP3 format, AAC generally achieves higher sound quality than MP3 encoders at the same bit rate.
Bluetooth is a short-range wireless technology standard that is used for exchanging data between fixed and mobile devices over short distances. The Creative Zen Hybrid 2 can connect at a 10meters distance via Bluetooth or infrared to another device.
The Beats Solo3 Wireless can connect at a 122meters distance via Bluetooth
Being an industry standard audio plug, a standard 3.5mm male connector is suitable for use with all MP3 players and computer sound cards. This means that it is commonly used in stereo headphones to your phone or connecting your phone to an external amplifier, sound bars, your car radio, etc.
Creative Zen Hybrid 2 has this connector giving it a wider range of connectivity with most of the sound devices out there. All plugs have at least a tip and sleeve with the number of rings that stand as a differentiating factor.
Beats Solo3 Wireless too have this kind of connector
Creative Zen Hybrid 2 have only 5 microphones, more microphones result in better sound quality and enable the device to filter out background noise.
The Beats Solo3 Wireless microphones are only 2.
Creative Zen Hybrid 2 use a noise-canceling type of microphone, these microphones are designed to filter out background noise from the desired sound. Especially useful in noisy environments.
Creative Zen Hybrid 2 support ambient sound mode, which uses microphones to pass through ambient noises so that they can still be heard. It’s useful when you want to listen to music but also be aware of what’s happening around you, for example when you’re having a jog but would still want to be able to hear traffic.
Creative Zen Hybrid 2 support multipoint, which allows you to link to more Bluetooth devices and switch between them. For example, you can easily switch calls from one device to another without having to manually disconnect and reconnect.
There is a control panel on the Creative Zen Hybrid 2 body, so you can easily access the volume control or remote without having to interact with a cable or another device it's connected to.
The Beats Solo3 Wireless too have a control panel on them.
Creative Zen Hybrid 2 can be used as a headset.
A headset is one headphone or pair with a built-in microphone. Headsets can be used for apps that require communication i.e. Zoom, Google Meet, Skype, games with voice chat, mobile phones, etc.
Beats Solo3 Wireless can be used as a headset. since they have a built-in microphone
The period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use that has followed instruction manuals. When covered under the manufacturer’s warranty it is possible to get a replacement in the case of a malfunction. Beats Solo3 Wireless have a warranty period of 1 years
Carrying headphones without a case, or putting them in bags without a casing can easily put them at risk of getting damaged. The Beats Solo3 Wireless come with their own special case or pouch, which is useful for safe transportation.