JLab Go Air
See price on AmazonOverall Score 5.3 Represents average audio ecosystem compatibility score.
IP ratings refer to the level of protection given by an enclosure, against solids and liquids. In the format of IPXX, 'X' represents a number The first value refers to protection against solids such as dust, followed by the one that refers to protection against liquids (sweat).
Having a value of IP44, the JLab Go Air's rating for solids indicates that they are protected against objects greater than 1.0mm such as wire, and of liquids that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes.
The JLab Go Air have a weight of 10g . We prefer a lower weight better because lighter devices are more comfortable to move with.
For a device to be true wireless it should have no cables linking any part of the device together, JLab Go Air are true wireless for this matter since they have no cables. This is a key difference since wireless earbuds have wires connecting the two earbuds .
JLab Go Air have sweat resistance
JLab Go Air have stereo speakers, devices with stereo speakers deliver sound from independent channels on both left and right sides, this creates a richer sound and a better listening experience.
JLab Go Air sit well in place, creating an acoustic seal that tones down background noise and also prevents the device voice audio from leaking out .
JLab Go Air driver unit is 8mm in diameter, the bigger the unit the more powerful, therefor producing better bass. A driver unit is the component that produces sound in the device, its size dictates the loudness of the earbuds.
JLab Go Air's lowest frequency is at 20Hz, low-frequency response inidcates how well a particular audio device generates low audible frequencies and if it alters the signal while at it.
The JLab Go Air's highest frequency is at 20,000Hz, high-frequency response shows how well a particular audio component makes high recognizable frequencies and if it changes to the signal on its way through.
The sound pressure level, is the pressure level of sound, in decibels, dB, JLab Go Air's measurement is 103dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
The JLab Go Air's battery life is 5 hours, these last less than 5 hours of listening which is considered average before recharge. A device's battery life is commonly given by the manufacturer, and with longer battery life, you get to use it for longer and requires fewer chargings.
This is given by the manufacturer, and JLab Go Air's case has a charge of 15 hours. A charging case with a longer battery life allows you to recharge your earbuds on the go many times before having to recharge the case itself.
It takes 1.5 hours to fully charge the JLab Go Air's battery. It is recommended to charge fully the battery before using the earbuds for the first time.
JLab Go Air have a battery level indicator, an indicator notifies you when the device has a low battery. The battery indicator lights indicate the charging state of your earbuds and charging case.
JLab Go Air have Bluetooth version of 5, Bluetooth is a wireless technology standard that allows data movement between devices placed in range, using short-wavelength, ultra-high frequency radio waves.
JLab Go Air have a 10meters distance to connect via Bluetooth.
The JLab Go Air have 2 microphones.
JLab Go Air microphone sensitivity is measured at -38dBV/Pa. The magnitude of the analog or digital output signal from the microphone with its input stimulus is a measure of its sensitivity. It's the 'loudness' of the voice that the earbud microphone can recognize.
With the JLab Go Air, so you can access the volume control, pause, play, mute, etc whichever functions are supported on the earbuds.
JLab Go Air have a warranty period of 2 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use following instruction manuals.
The JLab Go Air have voice prompts. Automatically receive information via audio messages, like if there is an issue with the connection.