Ingress protection ratings refer to the level of protection given by an enclosure, against solids and water. The letters 'IP' are followed by two values The first value means protection against solids say dust, followed by the one that refers to resistance against liquids (sweat).
Having a value of IPX4, the Beats Studio Buds's rating is read as, the first value of X denotes that no data available to specify a protection rating, and the second number of 4 means that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes. The Beats Studio Buds have a weight of 5.1g . We consider a lower weight better for the reason that lighter devices are easier to transport.
For a device to be true wireless it should have no wires linking any part of the device together, Beats Studio Buds are true wireless for this case since they don't have cables. This is a key difference as some wireless earbuds have wires connecting the two earbuds together. Beats Studio Buds are resistant to sweat
Beats Studio Buds have stereo speakers, what this means is that Beats Studio Buds's speakers deliver sound from separate channels on both left and right sides, creating a richer sound and a better listening experience.
ANC utilises advanced kind of tech to reduce unwanted ambient sounds. ANC works when, it detects and analyzes the sound pattern of incoming noise and generates a mirror signal to cancel it out. In simple terms, it's like having +1 (noise) and producing -1 (inverted noise) to make zero hence "diluting" the noise.
The Beats Studio Buds have Active Noise Cancellation allowing you to listen at lower levels of volume, causing less ear fatigue since you don't have to crank up the earbuds volume to overcome background noise. The Beats Studio Buds sit tightly in place, creating a sound covering that tones down background sounds and also prevents the device sound from leaking out .
The Beats Studio Buds have a unit size of 8.2mm in diameter, the bigger the unit the more powerful, therefor producing better bass. A driver unit is basically a mini speaker that makes sound in the earbuds, the unit size dictates the sound produced by the earbuds.
Beats Studio Buds's lowest frequency is at 20Hz, low-frequency response measures if and how well a particular audio device produces low audible frequencies and if it makes any changes to the signal on its way through. Beats Studio Buds's highest frequency is at 20,000Hz, high-frequency response shows how well an audio component makes high human frequencies and if it adjustments to the signal while at it. The sound pressure level, is the level of pressure of sound, measured in decibels, dB, Beats Studio Buds's measurement is 100.5dB/mW.
Devices with a higher sound pressure level are generally louder when supplied with any given audio source. The Beats Studio Buds's battery life is 8 hours, these last longer than 5 hours of listening which is considered average before recharge. A device's battery life is commonly given by the manufacturer, and with longer battery life, you get to use it for longer and have to charge the device less often.
The battery life of the charging case is given by the manufacturer, and the Beats Studio Buds's case has a full charge of 16 hours. A charging case with a longer battery life allows you to recharge your earbuds on the go several times before recharging the case itself. It requires 1.5 hours to fully charge the Beats Studio Buds's battery.
It is recommended to fully charge the battery before using the earbuds when they have been unused for extended periods. The Beats Studio Buds have a battery level indicator, an indicator notifies you when the device has a low battery. The battery indicator lights indicate the charging state of your device and charging case.
The Beats Studio Buds use USB TYPE-C, an industry-standard connector for transmitting both data and power in a single cable. Beats Studio Buds have Bluetooth version of 5.2, Bluetooth is a wireless technology standard that enables data movement between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves. The Beats Studio Buds have a 10meters distance connecting via Bluetooth.
Beats Studio Buds support AAC, a codec used for Bluetooth audio. It supports 24-bit audio at 250kbps. Since it uses psychoacoustic modeling, it can provide better results than other codecs at a similar bit rate.
Being the highest quality codec that any Bluetooth-supporting Apple product supports, the Beats Studio Buds will work fine with your iPad. If you are planning on using these with Android , ensure that they also support aptX HD, LDAC, or LHDC as well. The Beats Studio Buds have 6 microphones.
Beats Studio Buds have a noise-canceling microphone, these microphones are made to filter out background sounds from the earbuds' sound. Beats Studio Buds support ambient sound mode, which uses microphones to channel ambient noises so that they can still be heard even while wearing them
If lost in a room, or can't easily find them in your bag, Beats Studio Buds support the find earbuds feature. Beats Studio Buds support fast charging.
Commonly, technologies like Qualcomm’s Quick Charge, are used to reduce the time it takes to charge a device. The Beats Studio Buds support multipoint of 2 connections, this feature allows you to link to more than one Bluetooth device and switch between them. Say, you can seemlessly switch calls from one device to another without manually disconnect and reconnect.
Beats Studio Buds have a mute function, they have the feature to mute/unmute a conversation directly from the earbuds. With the Beats Studio Buds, so you can easily access the volume control, pause, play, mute, etc whichever features are supported on the earbuds. The Beats Studio Buds support voice prompts.
Automatically receive information via audio messages, say if there is a problem with the connection. Beats Studio Buds come with a special case. Carrying earbuds without a case, or putting them in your bag without a casing may easily damage them.
