Anker Soundcore Liberty 3 ProSee price on Amazon
Overall Score 7.2 Represents average audio ecosystem compatibility score.
Jabra Elite Active 75tSee price on Amazon
Overall Score 7.0 Represents average audio ecosystem compatibility score.
|Category||Features||Anker Soundcore Liberty 3 Pro||Jabra Elite Active 75t|
|DESIGN||ingress protection (ip) rating||IPX4||IP57|
|has no wires or cables||✓||✓|
|has stereo speakers||✓||✓|
|SOUND QUALITY||has active noise cancellation (noise control)||✓||✓|
|has passive noise reduction||✓||✓|
|driver unit size||10.6mm||6mm|
|sound pressure level||92dB/mW||✗|
|battery life of charging case||24hours||28hours|
|has wireless charging||✓||✓|
|has a battery level indicator||✓||✓|
|CONNECTIVITY||has usb type-c||✓||✓|
|maximum bluetooth range||10meters||10meters|
|MICROPHONE||number of microphones||6only||4only|
|has a noise-canceling microphone||✓||✓|
|highest mic frequency||✗||10000Hz|
|lowest mic frequency||✗||100Hz|
|EXTRAS||has ambient sound mode||✓||✓|
|has in/on-ear detection||✓||✓|
|has find earbuds feature||✓||✓|
|supports fast charging||✓||✓|
|has a mute function||✓||✓|
|control panel placed on a device||✓||✓|
|has voice prompts||✓||✓|
|travel bag is included||✓||✓|
|See price on Amazon||See price on Amazon|
IP ratings refer to the rating of protection offered by an enclosure, against solids and water. The letters 'IP' are followed by two values The first value refers to protection against solids say dust, while the second refers to resistance against liquids (water).
Scoring IP57, the Jabra Elite Active 75t's rating is read as, the first value of 5 denotes that ingress of dust is not totally prevented but dust does not enter in harmful quantities to interfere with the correct operation or impair safety, and of liquids that they are protected against temporary immersion in water under set conditions, say 1 metre for 30 minutes.
Compared to the Jabra Elite Active 75t, Anker Soundcore Liberty 3 Pro have a rating of IPX4 meaning that no data available to specify a protection rating and that of liquids is that, Jabra Elite Active 75t has a higher liquid rating than Anker Soundcore Liberty 3 Pro
Jabra Elite Active 75t have a weight of 10.1g . We prefer a lower weight better because lighter devices are easier to carry.
Anker Soundcore Liberty 3 Pro, at 12g are heavier than the Jabra Elite Active 75t with a difference of 1.9g
True wireless devices have no cables connecting any part of the device together, Jabra Elite Active 75t are true wireless for this case since they don't have wires. This is a key distinction since wireless earbuds have cables linking the 2 earbuds together.
Anker Soundcore Liberty 3 Pro also is true wireless because it doesn't have wires connecting the pair of earbuds .
Anker Soundcore Liberty 3 Pro have wingtips, these are reserved for workout earbuds and are usually an optional add-on to each silicone ear tip for a better fit.
Jabra Elite Active 75t are resistant to sweat
Anker Soundcore Liberty 3 Pro's resistance to sweat makes both devices good for use while doing sports such as long-distance running, marathons, training in workout bodysuits, etc
Jabra Elite Active 75t have stereo speakers, what this means is that Jabra Elite Active 75t's speakers deliver sound from separate channels on both left and right sides, creating a richer sound and a better listening experience.
Both Anker Soundcore Liberty 3 Pro and Jabra Elite Active 75t have stereo speakers
Active noise cancellation uses more advanced technology to reduce ambient sounds. ANC works when, it listens to the sound pattern of incoming noise and then generates a mirror signal to cancel it out. Simply put, it's like taking +1 (noise) then adding -1 (inverted noise) to make zero which results in a reduced level of noise.
Jabra Elite Active 75t have ANC enabling you to listen at lower levels of volume, causing less ear fatigue as you don't need to crank up the earbuds volume to outcompete background sounds.
The Anker Soundcore Liberty 3 Pro too have ANC making either of the devices ideal for plane rides and morning commutes. Each work with different noise cancellation modes, pick the setting that suits your travel or that suites your relaxation time.
The Jabra Elite Active 75t stay well in place, this creates a sound seal that reduces your environment noise well as preventing the earbuds voice audio from leaking out at the same.
Both Anker Soundcore Liberty 3 Pro, and Jabra Elite Active 75t have passive noise reduction this implies that they tone down ambient noise instead of actively using ANC to cancel it out.
Jabra Elite Active 75t have a unit size of 6mm in diameter, the bigger the unit the more powerful, therefor producing better bass.
A driver unit is basically a mini speaker that produces sound in the device, the unit size dictates the sound made by the device.
Anker Soundcore Liberty 3 Pro driver unit is 10.6mm in diameter, making them have a larger driver unit than that of Jabra Elite Active 75t by 4.6mm , a common assumption that driver units of a bigger size automatically produce better sound quality.
However, large drivers usually have difficulty producing high frequencies so it's true that, larger drivers can generate louder sound, but this does not indicate that they produce better quality sound.
The Jabra Elite Active 75t's lowest frequency is at 20Hz, low-frequency response measures if and how well a particular audio device produces low recognizable frequencies and if it alters the signal while at it.
Anker Soundcore Liberty 3 Pro's lowest frequency is at 20Hz, this means that both devices make sound with equal bass
The Jabra Elite Active 75t's highest frequency is at 20000Hz, high-frequency response tells how well an audio component makes high recognizable frequencies and if it makes any adjustments to the signal on its way through.
Anker Soundcore Liberty 3 Pro's highest frequency is at 40000Hz, this means that Anker Soundcore Liberty 3 Pro can generate a clearer and crispier treble than the Jabra Elite Active 75t
The sound pressure level, is the pressure level of sound, in decibels, dB, Anker Soundcore Liberty 3 Pro's measurement is 92dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
The Jabra Elite Active 75t's battery life is 7.5 hours, these last longer than 5 hours of listening which is considered average for a single charge. A device's battery life is given by the manufacturer, and with more battery hours, you get to use it for longer and requires fewer chargings.
Anker Soundcore Liberty 3 Pro's battery life is more than that of Jabra Elite Active 75t by 0.5 hours . Each time you recharge your device, they get a little less listening time. The effect is not noticeable at first, but over time, your wireless earbuds will have shorter listening time.
The battery life of the charging case is given by the vendor, and Jabra Elite Active 75t's case has a full charge of 28 hours. A charging case with more battery hours enables you to recharge your earbuds on the go multiple times before having to recharge the case itself.
Anker Soundcore Liberty 3 Pro's charging case has a battery life of 24 hours, less than that of Jabra Elite Active 75t by 4 hours
It requires 2.3 hours to fully charge the Jabra Elite Active 75t's battery. It is recommended to charge fully the battery before using the earbuds for the first time.
Anker Soundcore Liberty 3 Pro takes 2 hours to fully charge the battery, less than that of Jabra Elite Active 75t by 0.3 hours
Jabra Elite Active 75t, the device supports wireless charging. To charge the earbuds, you simply place down on a supported charging pad.
Anker Soundcore Liberty 3 Pro also support wireless charging, always look out for the charging standard of the earbuds.
Jabra Elite Active 75t have a battery level indicator, an indicator alerts you when the earbuds has a low battery. Its lights display the charging state of your earbuds and charging case.
Anker Soundcore Liberty 3 Pro too have a battery level indicator, charging indicators enable you determine the charging state of your earbuds, if charged fully, or having a low battery.
The Jabra Elite Active 75t use USB TYPE-C, a standard connector for transmitting both data and power in a single cable.
Anker Soundcore Liberty 3 Pro too have USB TYPE-C. This USB-C plug is part and parcel of most current laptops, phones, and tablets.
The Jabra Elite Active 75t have Bluetooth version of 5, Bluetooth is a wireless technology standard that allows data transfers between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves.
Anker Soundcore Liberty 3 Pro has a Bluetooth version of 5.2, newer than that of Jabra Elite Active 75t . Newer versions provide faster data transfers.
The Jabra Elite Active 75t have a 10meters distance to connect via Bluetooth.
Anker Soundcore Liberty 3 Pro have a maximum range of 10meters, equal to that of the Jabra Elite Active 75t
Jabra Elite Active 75t support AAC, a codec used for Bluetooth audio. It supports 24-bit audio at 250kbps. Since it uses psychoacoustic modeling, it provides better results than other codecs at the same bit rate.
Since its the highest quality codec that any Bluetooth-supporting Apple product supports, the Jabra Elite Active 75t will work well with your iPad. If you intend on using these with Android you need to pay even closer attention to codec support for if they only have AAC they won't provide the best audio quality possible, ensure that they also support aptX HD, LDAC, or LHDC as well.
The Anker Soundcore Liberty 3 Pro support AAC as well. Designed to be the successor of the MP3 format, AAC generally achieves higher sound quality than MP3 encoders at the same bit rate.
The Anker Soundcore Liberty 3 Pro support LDAC, a codec developed by Sony which allows streaming high-resolution audio over Bluetooth connections at up to 990 kbps at 32 bit/96 kHz. It can reach a high bitrate of 990kbps, which provides high-resolution audio.
Jabra Elite Active 75t have 4 microphones.
While the Anker Soundcore Liberty 3 Pro microphones are 6, more than that of Jabra Elite Active 75t by 2 . More microphones result in better sound quality and help the device to filter out background sounds.
The Jabra Elite Active 75t have a noise-canceling microphone, these microphones are intended to reduce noise from the earbuds' sound.
The Anker Soundcore Liberty 3 Pro too use a noise-canceling microphone. Especially useful in noisy areas.
The Jabra Elite Active 75t's highest mic frequency is 10000Hz, high frequencies are best for picking up treble. The highest mic frequency of a microphone is defined as its upper limiting frequency.
The Jabra Elite Active 75t's lowest mic frequency is 100Hz, low frequencies are best for recording bass. The lowest mic frequency of a microphone is defined as its lower limiting frequency.
The Jabra Elite Active 75t support ambient sound mode, which uses microphones to pass through ambient sound to still be heard even when wearing the earbuds
The Anker Soundcore Liberty 3 Pro support ambient sound mode as well, it’s useful when you want to listen to music while being aware of what’s happening around you, say you’re having a jog but would still want to be able to hear traffic.
The Jabra Elite Active 75t support in/on-ear detection, the sensors in the earbuds can detect when removed from your ears .
The Anker Soundcore Liberty 3 Pro support in/on-ear detection, automatically pauses your music, or audiobook when you remove earbuds from your ears improving your listening experience.
If lost in a room, or can't easily find them in your bag, the Jabra Elite Active 75t have a find earbuds feature.
The Anker Soundcore Liberty 3 Pro also have the find earbuds feature. Use the earbuds app on your phone to play an alarm from your earbuds to find them.
Jabra Elite Active 75t support fast charging. Commonly, technologies like MediaTek’s Pump Express, are used to reduce the time it takes to charge a device.
Anker Soundcore Liberty 3 Pro too support fast charging. It's very similar to regular charging, only that the battery fills up much faster. Say, with Quick Charge 3.0, the battery can be charged to 50% in just 30 minutes.
The Jabra Elite Active 75t support multipoint of 2 connections, the multipoint feature allows you to link to more than one Bluetooth device and switch between them. Say, you can switch calls from one device to another without manually disconnect and reconnect.
The Anker Soundcore Liberty 3 Pro support multipoint count of 2, equal to that of the Jabra Elite Active 75t . Bluetooth multipoint comes in handy when you can be on one call without missing notifications from another device.
The Jabra Elite Active 75t have a mute function, they support the option to mute/unmute a conversation directly from the earbuds.
The Anker Soundcore Liberty 3 Pro also have this function. It means that you are in position turn off the earbuds' microphone, but you can still hear the other party's voice.
With the Jabra Elite Active 75t, so you can access the volume control, pause, play, mute, etc whichever features are supported on the earbuds.
Anker Soundcore Liberty 3 Pro too have a control panel on them.
The Jabra Elite Active 75t have a warranty period of 2 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use following instruction manuals.
When covered under the manufacturer’s warranty it is possible to get a replacement in the case of a malfunction. Anker Soundcore Liberty 3 Pro have a warranty period of 1Years, less than that of Jabra Elite Active 75t by 1 Years .
The Jabra Elite Active 75t support voice prompts. Automatically receive information through audio messages, like if there is a problem with the connection.
The Anker Soundcore Liberty 3 Pro also support voice prompts .i.e the device notifies you when the battery is low, and it's time to recharge them.
The Jabra Elite Active 75t come with a special pouch. Carrying earphones without a case, or putting them inside your bag without a cover may easily damage them.
Anker Soundcore Liberty 3 Pro too have a case included, which offers safe transportation.