Anker Soundcore Liberty 3 ProSee price on Amazon
Overall Score 7.2 Represents average audio ecosystem compatibility score.
Jabra Evolve2 BudsSee price on Amazon
Overall Score 7.0 Represents average audio ecosystem compatibility score.
|Category||Features||Anker Soundcore Liberty 3 Pro||Jabra Evolve2 Buds|
|DESIGN||ingress protection (ip) rating||IPX4||IP54|
|has no wires or cables||✓||✓|
|has stereo speakers||✓||✓|
|SOUND QUALITY||has active noise cancellation (noise control)||✓||✓|
|has passive noise reduction||✓||✓|
|driver unit size||10.6mm||6mm|
|sound pressure level||92dB/mW||✗|
|battery life of charging case||24hours||21hours|
|has wireless charging||✓||✓|
|has a battery level indicator||✓||✓|
|CONNECTIVITY||has usb type-c||✓||✓|
|maximum bluetooth range||10meters||20meters|
|MICROPHONE||number of microphones||6only||6only|
|has a noise-canceling microphone||✓||✓|
|highest mic frequency||✗||8000Hz|
|lowest mic frequency||✗||80Hz|
|EXTRAS||has ambient sound mode||✓||✓|
|has in/on-ear detection||✓||✓|
|has find earbuds feature||✓||✓|
|supports fast charging||✓||✓|
|has a mute function||✓||✓|
|control panel placed on a device||✓||✓|
|has voice prompts||✓||✓|
|travel bag is included||✓||✓|
|See price on Amazon||See price on Amazon|
IP ratings is the rating of protection given by a casing, against dust and water. The letters 'IP' are followed by two values The first value of the IP rating refers to protection against solids say dust, followed by the one that refers to protection against liquids (sweat).
Having a value of IP54, the Jabra Evolve2 Buds's rating is read as, the first number of 5 denotes that ingress of dust is not totally prevented but dust does not enter in harmful quantities to interfere with the correct operation or impair safety, and the second value of 4 means that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes.
In comparison to the Jabra Evolve2 Buds, Anker Soundcore Liberty 3 Pro have a rating of IPX4 meaning that no data available to specify a protection rating and that of liquids is that, they both have the same rating against liquids
Jabra Evolve2 Buds have a weight of 10.8g . We consider a lower weight better for the reason that lighter devices are easier to move with.
The Anker Soundcore Liberty 3 Pro, at 12g are heavier than the Jabra Evolve2 Buds by of 1.2g
For a device to be true wireless it should have no cables connecting any part of the device together, Jabra Evolve2 Buds are true wireless for this case since they don't have wires. This is a key distinction since wireless earbuds have wires linking the pair of earbuds together.
Anker Soundcore Liberty 3 Pro also is true wireless because it doesn't have wires connecting the two earbuds .
Anker Soundcore Liberty 3 Pro have wingtips, these are commonly used for workout earbuds and come as an optional add-on to the separate silicone ear tip for a more secure fit.
Jabra Evolve2 Buds have sweat resistance
Anker Soundcore Liberty 3 Pro's resistance to sweat makes both devices fit for use while doing sports such as long-distance running, marathons, training in workout bodysuits, etc
Jabra Evolve2 Buds have stereo speakers, devices with stereo speakers deliver sound from independent channels on both left and right sides, this creates a richer sound and a better listening experience.
Both Anker Soundcore Liberty 3 Pro and Jabra Evolve2 Buds have stereo speakers
Active noise cancellation uses more advanced kind of tech to reduce ambient sounds. How it works, it listens to the sound pattern of incoming noise and generates a mirror signal to cancel it out. In simple terms, it's like having +1 (sound from your surrounding) and producing -1 (inverted noise) to make zero which results in a reduced level of noise.
The Jabra Evolve2 Buds have Active Noise Cancellation enabling you to listen at lower levels of volume, good for your ears as you don't need to crank up the earbuds volume to overcome background noise.
Anker Soundcore Liberty 3 Pro too have ANC making either of the devices ideal for flights and rush hour commutes. The Jabra Evolve2 Buds and Anker Soundcore Liberty 3 Pro operate with different noise cancellation settings, pick the noise cancellation type that you prefer for travel or that suites your relaxation time.
The Jabra Evolve2 Buds stay tightly in place, this creates a sound seal that reduces background sounds well as preventing the earbuds sound from leaking out at the same.
Both Anker Soundcore Liberty 3 Pro, and Jabra Evolve2 Buds have passive noise reduction this means that they reduce ambient noise without using ANC to cancel it out.
The Jabra Evolve2 Buds have a unit size of 6mm in diameter, bigger drivers are more powerful, and can produce better bass.
The driver unit is basically a mini speaker that produces sound in the earbuds, its size dictates the sound produced by the earbuds.
Anker Soundcore Liberty 3 Pro driver unit is 10.6mm in diameter, making them have a larger driver unit than that of Jabra Evolve2 Buds by 4.6mm , many people have a misconception that driver units of a bigger size automatically produce better sound quality.
However, large drivers find it difficult to produce high frequencies so yes, larger drivers can generate louder sound, but this does not imply that they deliver better quality sound.
Jabra Evolve2 Buds's lowest frequency is at 20Hz, low-frequency response inidcates how well a particular audio device generates low frequencies that can be heard, and if it alters the signal while at it.
Anker Soundcore Liberty 3 Pro's lowest frequency is at 20Hz, this implies that both devices can make sound with equal bass
The Jabra Evolve2 Buds's highest frequency is at 20000Hz, high-frequency response indicates how well an audio device produces high audible frequencies and if it makes any changes to the signal while at it.
Anker Soundcore Liberty 3 Pro's highest frequency is at 40000Hz, this means that Anker Soundcore Liberty 3 Pro produce a clearer and crispier treble than the Jabra Evolve2 Buds
SPL, is the pressure level of sound, in decibels, dB, Anker Soundcore Liberty 3 Pro's measurement is 92dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
Jabra Evolve2 Buds's battery life is 10 hours, these last longer than 5 hours of listening which is considered average for a single charge. A device's battery life is commonly given by the manufacturer, and with longer battery life, you get to use it for longer and requires fewer chargings.
Anker Soundcore Liberty 3 Pro's battery life is less than that of Jabra Evolve2 Buds by 2 hours . Each time you recharge your device, they get a little less playing time. The effect is not noticeable at first, but over a few years, your wireless earbuds will have shorter listening time.
The battery life of the charging case is given by the vendor, and Jabra Evolve2 Buds's case has a full charge of 21 hours. A charging case with a longer battery life allows you to recharge your earbuds on the go many times before recharging the case itself.
Anker Soundcore Liberty 3 Pro's charging case has a battery life of 24 hours, more than that of Jabra Evolve2 Buds by 3 hours
It requires 2 hours to fully charge the Jabra Evolve2 Buds's battery. It is recommended to charge fully the battery before using the earbuds when they have been in storage for extended periods.
Anker Soundcore Liberty 3 Pro takes 2 hours to fully charge the battery, equal to that of the Jabra Evolve2 Buds
Jabra Evolve2 Buds, the device supports wireless charging. To charge the earbuds, you just put down on a supported charging pad.
Anker Soundcore Liberty 3 Pro also support wireless charging, always look out for the charging standard of a device.
The Jabra Evolve2 Buds have a battery level indicator, an indicator shows you when the device has a low battery. The battery indicator lights indicate the charging state of your device and case.
Anker Soundcore Liberty 3 Pro too have a battery level indicator, these allow you tell the charging state of your device, whether fully charged, or having a low battery.
Jabra Evolve2 Buds support USB TYPE-C, an industry-standard connector for transmitting both data and power in a single cable.
Anker Soundcore Liberty 3 Pro too have USB TYPE-C. This USB-C plug is part and parcel of most current electronics.
Jabra Evolve2 Buds have Bluetooth version of 5.2, Bluetooth is a wireless technology standard that allows data transfers between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves.
Anker Soundcore Liberty 3 Pro has a Bluetooth version of 5.2, equal to that of the Jabra Evolve2 Buds . Newer versions provide faster data transfers.
The Jabra Evolve2 Buds have a 20meters distance connecting via Bluetooth.
Anker Soundcore Liberty 3 Pro have a maximum range of 10meters, less than that of Jabra Evolve2 Buds by 10meters
Jabra Evolve2 Buds support AAC, a codec that is used for Bluetooth audio. It supports 24-bit audio at 250kbps. Since it uses psychoacoustic modeling, it provides better results than other codecs at the same bit rate.
Being the highest quality codec that any Bluetooth-supporting Apple product supports, the Jabra Evolve2 Buds will work fine with your MacBook. If you intend on using these with Android you need to pay even closer attention to codec support for if they only have AAC they won't provide the best audio quality possible, ensure that they also support aptX HD, LDAC, or LHDC as well.
The Anker Soundcore Liberty 3 Pro support AAC as well. Designed to be the successor of the MP3 format, AAC generally achieves higher sound quality than MP3 encoders at the same bit rate.
Anker Soundcore Liberty 3 Pro support LDAC, a codec developed by Sony which allows streaming high-resolution audio over Bluetooth connections at up to 990 kbps at 32 bit/96 kHz. It is capable of a very high bitrate of 990kbps, providing high-resolution audio.
The Jabra Evolve2 Buds have 6 microphones.
The Anker Soundcore Liberty 3 Pro microphones are 6, equal to that of the Jabra Evolve2 Buds . More microphones result in better sound quality and help the earbuds to filter out noise.
Jabra Evolve2 Buds use a noise-canceling type of microphone, these microphones are made to filter out noise from the desired sound.
The Anker Soundcore Liberty 3 Pro too use a noise-canceling microphone. This is useful in noisy areas.
The Jabra Evolve2 Buds's highest mic frequency is 8000Hz, high frequencies are better for recording treble. The highest mic frequency of a microphone is defined as its upper limiting frequency.
The Jabra Evolve2 Buds's lowest mic frequency is 80Hz, low frequencies are best for picking up bass. The lowest mic frequency of a microphone is defined as its lower limiting frequency.
The Jabra Evolve2 Buds support ambient sound mode, which uses microphones to channel ambient sound to still be heard even while wearing them
The Anker Soundcore Liberty 3 Pro support ambient sound mode as well, it’s useful when you want to listen to music while being aware of your surrounding, for example when you’re having a run but still want to hear traffic.
The Jabra Evolve2 Buds have in/on-ear detection, the sensors in the device can detect when removed from your ears .
The Anker Soundcore Liberty 3 Pro too support in/on-ear detection, automatically pauses your music, or audiobook when you remove earbuds from your ears saving battery life.
When lost in a room, or can't be found in your bag, Jabra Evolve2 Buds support the find earbuds feature.
The Anker Soundcore Liberty 3 Pro too have the find earbuds feature. Simply use the earbuds app on your phone to play an alarm from your earbuds to locate them.
Jabra Evolve2 Buds support fast charging. Usually, technologies like Qualcomm’s Quick Charge, are used to lower the amount of time it takes to charge a device.
The Anker Soundcore Liberty 3 Pro too support fast charging. This kind is similar to regular charging, just that the battery fills up much faster. Say, with Quick Charge 3.0, the battery can be charged to 50% in just thirty minutes.
Jabra Evolve2 Buds have a multipoint of 2 connections, this feature allows you to link to more than one Bluetooth device and switch between them. For example, you can seemlessly switch calls from one device to another without having to manually disconnect and reconnect.
The Anker Soundcore Liberty 3 Pro have a multipoint count of 2, equal to that of the Jabra Evolve2 Buds . Bluetooth multipoint is useful because you can be on one call without missing notifications coming from another connected device.
Jabra Evolve2 Buds have a mute function, they have the option to mute/unmute a conversation directly from the device.
The Anker Soundcore Liberty 3 Pro also have the mute function. It means that you are in position turn off the earbuds' microphone, but you can still hear the other party talk.
With the Jabra Evolve2 Buds, so you can access the volume control, pause, play, mute, etc whichever functions are supported on the device.
Anker Soundcore Liberty 3 Pro too have a control panel on them.
Jabra Evolve2 Buds have a warranty period of 2 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use that has followed instruction manuals.
If covered under the manufacturer’s warranty it is possible to get a replacement in the case of a malfunction. Anker Soundcore Liberty 3 Pro have a warranty period of 1Years, less than that of Jabra Evolve2 Buds by 1 Years .
Jabra Evolve2 Buds support voice prompts. Automatically receive information via audio messages, say if there is a problem with the connection.
The Anker Soundcore Liberty 3 Pro also support voice prompts .i.e the device notifies you if the battery is running low, and it's time to recharge the earbuds.
The Jabra Evolve2 Buds come with a special pouch. Carrying earphones openly, or putting them in your pockets without a casing may easily damage them.
Anker Soundcore Liberty 3 Pro also have a case included, which is useful for safe transportation.