Overall Score 7.4 Represents average audio ecosystem compatibility score.
Overall Score 5.7 Represents average audio ecosystem compatibility score.
Category | Features | Beats Fit Pro | JBL Endurance Peak 2 |
---|---|---|---|
DESIGN | ingress protection (ip) rating | IPX4 | IPX7 |
weight | 11.2g | 26g | |
has no wires or cables | ✓ | ✓ | |
wingtips included | ✓ | ✓ | |
sweat resistance | ✓ | ✓ | |
has stereo speakers | ✓ | ✓ | |
SOUND QUALITY | has active noise cancellation (noise control) | ✓ | ✗ |
has passive noise reduction | ✓ | ✓ | |
driver unit size | 9.5mm | 10mm | |
lowest frequency | 20Hz | 20Hz | |
highest frequency | 20000Hz | 20000Hz | |
sound pressure level | 101.3dB/mW | 93dB/mW | |
has a neodymium magnet | ✓ | ✗ | |
POWER | battery life | 7hours | 6hours |
battery life of charging case | 21hours | 24hours | |
charge time | 1hours | 2hours | |
battery power | 55mAh | 60mAh | |
has a battery level indicator | ✓ | ✓ | |
CONNECTIVITY | has usb type-c | ✓ | ✓ |
bluetooth version | v5 | v5 | |
maximum bluetooth range | 10meters | 10meters | |
has aac | ✓ | ✓ | |
audio latency | 70ms | ✗ | |
MICROPHONE | number of microphones | 6only | 2only |
has a noise-canceling microphone | ✓ | ✗ | |
mic sensitivity | ✗ | -38dBV/Pa | |
EXTRAS | has ambient sound mode | ✓ | ✗ |
has in/on-ear detection | ✓ | ✗ | |
has find earbuds feature | ✓ | ✗ | |
supports fast charging | ✓ | ✓ | |
multipoint count | 2only | ✗ | |
has a mute function | ✓ | ✗ | |
control panel placed on a device | ✓ | ✓ | |
warranty period | 1Years | 1Years | |
has voice prompts | ✓ | ✓ | |
travel bag is included | ✓ | ✓ | |
See price on Amazon | See price on Amazon |
Ingress protection ratings is the rating of protection given by a casing, against solids and water. In the format of IPXX, 'X' represents a number The first value of the IP rating represents protection against solids say dust, while the second refers to protection against liquids (sweat).
Scoring IPX7, the JBL Endurance Peak 2's rating is read as, the first number of X denotes that no data available to specify a protection rating, and the second value of 7 means that they are protected against temporary immersion in water under set conditions, say 1 metre for 30 minutes.
In comparison to the JBL Endurance Peak 2, Beats Fit Pro have a rating of IPX4 meaning that
we are not yet certain of their rating with solids (dust)
and that of liquids is that,
Beats Fit Pro has a lower liquid rating than JBL Endurance Peak 2
JBL Endurance Peak 2 have a weight of 26g . We consider a lower weight best because lighter devices are more comfortable to move with.
The Beats Fit Pro, at 11.2g
weigh less than the JBL Endurance Peak 2 with a difference -14.8g
For a device to be true wireless it should have no cables connecting any part of the device together, JBL Endurance Peak 2 are true wireless for this case since they have no cables. This is a key distinction as some wireless earbuds have wires connecting the two earbuds .
Beats Fit Pro also is true wireless because it has no wires linking the 2 earbuds .
JBL Endurance Peak 2 have wingtips, these are commonly used for earbuds for workouts and come as an optional add-on to each silicone ear tip for a more secure fit.
Beats Fit Pro too have wingtips, by resting against the triangular fossa and form a secure fit to combat vigorous movement, they come in handy for sports and other physical activities. If applied correctly, they prevent the earbuds from falling off.
JBL Endurance Peak 2 have sweat resistance
Beats Fit Pro's resistance to sweat makes both devices good for use during long-distance running, marathons, cardio sweat workouts , etc
JBL Endurance Peak 2 have stereo speakers, devices with stereo speakers deliver sound from separate channels on both left and right sides, creating a richer sound and a better listening experience.
The Beats Fit Pro also have stereo speakers
ANC utilises more advanced technology to actively counter noise. ANC works when, it detects and analyzes the sound pattern outside and inside the earbud and generates a mirror signal to cancel it out. In simple terms, it's like taking +1 (sound from your surrounding) then adding -1 (inverted noise) giving 0 which results in a reduced level of noise.
The Beats Fit Pro have ANC enabling you to listen at lower levels of volume, causing less ear fatigue as you don't need to crank up the device volume to outcompete background sounds.
The JBL Endurance Peak 2 stay well in place, creating an acoustic covering that reduces background noise well as preventing the earbuds sound from leaking out .
Both Beats Fit Pro, and JBL Endurance Peak 2 have passive noise reduction this means that they limit ambient noise without using ANC to cancel it out.
The JBL Endurance Peak 2 driver unit is 10mm in diameter, bigger drivers are more powerful, and can produce better bass.
The driver unit is basically a mini speaker that makes sound in the earbuds, the unit size dictates the sound made by the earbuds.
Beats Fit Pro driver unit is 9.5mm in diameter,
which implies that they have a smaller driver unit than that of JBL Endurance Peak 2 by 0.5mm
, a common assumption that driver units of a bigger size automatically produce better sound quality.
However, large drivers usually have difficulty producing high frequencies so yeah, larger drivers are capable of generating louder sound, but this does not imply that they deliver better quality sound.
JBL Endurance Peak 2's lowest frequency is at 20Hz, low-frequency response measures if and how well an audio component generates low audible frequencies and if it alters the signal on its way through.
Beats Fit Pro's lowest frequency is at 20Hz, this means that
both devices can make sound with equal bass
The JBL Endurance Peak 2's highest frequency is at 20000Hz, high-frequency response measures if and how well a particular audio device generates high audible frequencies and if it changes to the signal on its way through.
Beats Fit Pro's highest frequency is at 20000Hz, this implies that
both devices produce equal treble
SPL, is the level of pressure of sound, measured in decibels, dB, JBL Endurance Peak 2's measurement is 93dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
Beats Fit Pro's sound pressure level measurement is 101.3dB/mW. How loud a device is can be taken differently by separate people, so we need to have a way of getting a standard measurement of sound level expressed in numerical terms.
The Beats Fit Pro have neodymium magnets, if used in audio devices produce a higher sensitivity and substantial sound output using less power to do so. They can help produce music at quite a high sound pressure level, using high magnetic flux.
JBL Endurance Peak 2's battery life is 6 hours, these last longer than 5 hours of listening which is considered average before recharge. A device's battery life is usually given by the manufacturer, and with more battery hours, you get to use it for longer and have to charge the device less often.
Beats Fit Pro's battery life is
more than that of JBL Endurance Peak 2 by 1 hours
. Every time you recharge your earbuds, they get a little less listening time. The effect is barely noticeable at first, but over a few years, your wireless earbuds will have shorter listening time.
This is given by the manufacturer, and JBL Endurance Peak 2's case is said to have a full charge of 24 hours. A charging case with a longer battery life enables you to recharge your earbuds on the go multiple times before recharging the case itself.
Beats Fit Pro's charging case has a battery life of 21 hours,
less than that of JBL Endurance Peak 2 by 3 hours
It requires 2 hours to fully charge the JBL Endurance Peak 2's battery. It is highly adivsable to fully charge the battery before using the earbuds for the first time.
Beats Fit Pro takes 1 hours to fully charge the battery,
less than that of JBL Endurance Peak 2 by 1 hours
JBL Endurance Peak 2's battery capacity is 60mAh, battery capacity, shows the amount of electrical energy that a battery can store.
Beats Fit Pro's battery power is 55mAh.
less than that of JBL Endurance Peak 2 by 5mAh
JBL Endurance Peak 2 have a battery level indicator, an indicator alerts you when the earbuds has a low battery. Its lights display the charging state of your earbuds and case.
Beats Fit Pro too have a battery level indicator, these enable you to tell the charging state of your device, whether fully charged, or having a low battery.
JBL Endurance Peak 2 use USB TYPE-C, an industry-standard connector for transmitting both data and power through a single cable.
Beats Fit Pro too support USB TYPE-C. This USB-C plug is part and parcel of most current laptops, phones, and tablets.
JBL Endurance Peak 2 have Bluetooth version of 5, Bluetooth is a wireless technology standard that enables data transfers between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves.
Beats Fit Pro has a Bluetooth version of 5,
equal to that of the JBL Endurance Peak 2
. Newer versions provide faster data transfers.
JBL Endurance Peak 2 have a 10meters distance connecting via Bluetooth.
Beats Fit Pro have a maximum range of 10meters,
equal to that of the JBL Endurance Peak 2
JBL Endurance Peak 2 support AAC, a codec that is used for Bluetooth audio. It supports 24-bit audio at 250kbps. Because it uses psychoacoustic modeling, it can provide better results than other codecs at a similar bit rate.
Since its the highest quality codec that any Bluetooth-supporting Apple product supports, the JBL Endurance Peak 2 will work well with your iPhone. If you are planning on using these with Android , ensure that they also support aptX HD, LDAC, or LHDC as well.
The Beats Fit Pro support AAC as well. Designed to be the successor of the MP3 format, AAC generally achieves higher sound quality than MP3 encoders at the same bit rate.
Latency refers to the time it takes for the audio signal to be transmitted to your earbuds. Beats Fit Pro have a latency of 70ms, a lower latency reduces audio lag and is particularly important when playing games or watching videos.
The JBL Endurance Peak 2 have 2 microphones.
Beats Fit Pro microphones are 6,
more than that of JBL Endurance Peak 2 by 4
. More microphones result in better sound quality and help the device to filter out background sounds.
The Beats Fit Pro have a noise-canceling microphone, these microphones are intended to filter out background sounds from the earbuds' sound.
JBL Endurance Peak 2 microphone sensitivity is measured at -38dBV/Pa. The magnitude of the analog or digital output signal from the microphone with its input stimulus is a measure of its sensitivity. It's the 'loudness' of the voice that the earbud microphone can recognize.
Beats Fit Pro support ambient sound mode, which uses microphones to channel ambient sound so that they can still be heard even while wearing them
The Beats Fit Pro support in/on-ear detection, the sensors in the earbuds can detect when they are removed from your ears .
When misplaced in a room, or can't be found in your bag, the Beats Fit Pro support the find earbuds feature.
JBL Endurance Peak 2 support fast charging. Most often, technologies like MediaTek’s Pump Express, are used to lower the time it takes to charge the earbuds.
The Beats Fit Pro too support fast charging. This kind is similar to regular charging, only that the battery is filling up much faster. Say, with Quick Charge 3.0, the battery is charged to 50% in just 30 minutes.
The Beats Fit Pro have a multipoint of 2 connections, this feature allows you connect to more than one Bluetooth device and switch between them. Say, you can switch calls from one device to another without having to manually disconnect and reconnect.
Beats Fit Pro have a mute function, they have the feature to mute/unmute a conversation directly from the earbuds.
With the JBL Endurance Peak 2, so you can access the volume control, pause, play, mute, etc whichever functions are supported on the earbuds.
Beats Fit Pro also have a control panel on them.
JBL Endurance Peak 2 have a warranty period of 1 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use following instruction manuals.
If covered under the manufacturer’s warranty it is possible to get a replacement a malfunction occurs. Beats Fit Pro have a warranty period of 1Years,
equal to that of the JBL Endurance Peak 2
.
JBL Endurance Peak 2 support voice prompts. With voice prompts, you receive information through audio messages, like if there is an issue with the connection.
Beats Fit Pro too support voice prompts meaning the earbuds will notify you when the battery is running low, and you need to recharge them.
JBL Endurance Peak 2 come with their own special pouch. Carrying earphones openly, or putting them inside your bag without a casing may easily put them at risk of getting damaged.
Beats Fit Pro too have a travel bag included, which offers safe transportation.