Overall Score 6.6 Represents average audio ecosystem compatibility score.
Overall Score 5.7 Represents average audio ecosystem compatibility score.
Category | Features | Bose QuietComfort Earbuds II | JBL Endurance Peak 2 |
---|---|---|---|
DESIGN | ingress protection (ip) rating | IPX4 | IPX7 |
weight | 12.5g | 26g | |
has no wires or cables | ✓ | ✓ | |
wingtips included | ✓ | ✓ | |
sweat resistance | ✓ | ✓ | |
has stereo speakers | ✓ | ✓ | |
SOUND QUALITY | has active noise cancellation (noise control) | ✓ | ✗ |
has passive noise reduction | ✓ | ✓ | |
driver unit size | 9.3mm | 10mm | |
lowest frequency | 20Hz | 20Hz | |
highest frequency | 20000Hz | 20000Hz | |
sound pressure level | ✗ | 93dB/mW | |
POWER | battery life | 6hours | 6hours |
battery life of charging case | 18hours | 24hours | |
charge time | 2hours | 2hours | |
battery power | ✗ | 60mAh | |
has a battery level indicator | ✓ | ✓ | |
CONNECTIVITY | has usb type-c | ✓ | ✓ |
bluetooth version | v5.3 | v5 | |
maximum bluetooth range | 10meters | 10meters | |
has aac | ✓ | ✓ | |
has aptx adaptive | ✓ | ✗ | |
MICROPHONE | number of microphones | 8only | 2only |
has a noise-canceling microphone | ✓ | ✗ | |
mic sensitivity | ✗ | -38dBV/Pa | |
EXTRAS | has ambient sound mode | ✓ | ✗ |
has in/on-ear detection | ✓ | ✗ | |
has find earbuds feature | ✓ | ✗ | |
supports fast charging | ✓ | ✓ | |
multipoint count | 2only | ✗ | |
has a mute function | ✓ | ✗ | |
control panel placed on a device | ✓ | ✓ | |
warranty period | ✗ | 1Years | |
has voice prompts | ✓ | ✓ | |
travel bag is included | ✓ | ✓ | |
See price on Amazon | See price on Amazon |
IP ratings refer to the rating of protection offered by an enclosure, against solids and water. The letters 'IP' are followed by two values The first value of the IP rating represents protection against solids such as dust, while the second refers to protection against liquids (sweat).
Having a value of IPX7, the JBL Endurance Peak 2's rating for solids indicates that no data available to specify a protection rating, and the second number of 7 means that they are protected against temporary immersion in water under set conditions, say 1 metre for 30 minutes.
In comparison to the JBL Endurance Peak 2, Bose QuietComfort Earbuds II have a rating of IPX4 meaning that
we are not yet certain of their rating with solids (dust)
and that of liquids is that,
Bose QuietComfort Earbuds II has a lower liquid rating than JBL Endurance Peak 2
JBL Endurance Peak 2 have a weight of 26g . We take in account a lower weight better for the reason that lighter devices are more comfortable to move with.
Bose QuietComfort Earbuds II, at 12.5g
are lighter than the JBL Endurance Peak 2 by -13.5g
For a device to be true wireless it should have no cables linking any part of the device together, JBL Endurance Peak 2 are true wireless for this case since they don't have wires. This is a major distinction as some wireless earbuds have cables connecting the 2 earbuds .
Bose QuietComfort Earbuds II also is true wireless since it has no wires linking the 2 earbuds together.
The JBL Endurance Peak 2 come with wingtips, these are reserved for workout earbuds and are usually an optional add-on to each silicone ear tip for a more secure fit.
Bose QuietComfort Earbuds II too have wingtips, these rest against the triangular fossa and form a secure fit to match vigorous movement, they are best suited for sports and other physical activities. When applied as directed, they secure the earbuds from falling off.
JBL Endurance Peak 2 are resistant to sweat
Bose QuietComfort Earbuds II's resistance to sweat makes both devices ideal for use while doing sports such as long-distance running, marathons, training in workout bodysuits, etc
JBL Endurance Peak 2 have stereo speakers, devices with stereo speakers deliver sound from independent channels on both left and right sides, this creates a richer sound and a better listening experience.
Both Bose QuietComfort Earbuds II and JBL Endurance Peak 2 have stereo speakers
Active noise cancellation uses more advanced technology to reduce unwanted ambient sounds. ANC works when, it detects and analyzes the sound pattern of incoming noise and generates a mirror signal to cancel it out. In simple terms, it's like having +1 (sound from your surrounding) and producing -1 (inverted noise) to make 0 therefore "diluting" the noise.
The Bose QuietComfort Earbuds II have ANC allowing you to listen at lower volume levels, good for your ears since you don't need to crank up the device volume to outcompete background sounds.
The JBL Endurance Peak 2 sit tightly in place, this creates an acoustic covering that tones down your environment sounds and also prevents the earbuds music from leaking out at the same.
Both Bose QuietComfort Earbuds II, and JBL Endurance Peak 2 have passive noise reduction this means that both limit ambient noise without using ANC to cancel it out.
JBL Endurance Peak 2 have a unit size of 10mm in diameter, bigger drivers are more powerful, and can produce better bass.
The driver unit is basically a mini speaker that produces sound in the device, the unit size determines the sound made by the device.
Bose QuietComfort Earbuds II driver unit is 9.3mm in diameter,
which implies that they have a smaller driver unit than that of JBL Endurance Peak 2 by 0.7mm
, many people have a misconception that driver units of a bigger size automatically produce better sound quality.
However, large drivers find it difficult to produce high frequencies so yeah, larger drivers can generate louder sound, but this does not indicate that they produce better quality sound.
The JBL Endurance Peak 2's lowest frequency is at 20Hz, low-frequency response inidcates how well a particular audio component generates low recognizable frequencies and if it makes any changes to the signal while at it.
Bose QuietComfort Earbuds II's lowest frequency is at 20Hz, this means that
both devices can make sound with equal bass
JBL Endurance Peak 2's highest frequency is at 20000Hz, high-frequency response shows how well a particular audio component generates high human frequencies and if it makes any adjustments to the signal while at it.
Bose QuietComfort Earbuds II's highest frequency is at 20000Hz, this means that
both devices can generate equal treble
SPL, is the pressure level of sound, measured in decibels, dB, JBL Endurance Peak 2's measurement is 93dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
The JBL Endurance Peak 2's battery life is 6 hours, these last longer than 5 hours of listening which is considered average before recharge. A device's battery life is given by the manufacturer, and with longer battery life, you get to use it for longer and requires fewer chargings.
Bose QuietComfort Earbuds II's battery life is
equal to that of the JBL Endurance Peak 2
. Every time you recharge your device, they get a little less playing time. The effect is barely noticeable at first, but over a few years, your wireless earbuds will no longer play for long like they used to.
This is given by the vendor, and JBL Endurance Peak 2's case is said to have a full charge of 24 hours. A charging case with a longer battery life enables you to recharge your earbuds on the go multiple times before recharging the case itself.
Bose QuietComfort Earbuds II's charging case has a battery life of 18 hours,
less than that of JBL Endurance Peak 2 by 6 hours
It takes 2 hours to fully charge the JBL Endurance Peak 2's battery. It is recommended to charge fully the battery before using the earbuds when they have been unused for extended periods.
Bose QuietComfort Earbuds II takes 2 hours to fully charge the battery,
equal to that of the JBL Endurance Peak 2
JBL Endurance Peak 2's battery capacity is 60mAh, battery capacity, represents the amount of electrical energy that a battery can store.
JBL Endurance Peak 2 have a battery level indicator, an indicator alerts you when the device has a low battery. Its lights display the charging status of your earbuds and charging case.
Bose QuietComfort Earbuds II too have a battery level indicator, these enable you to tell the charging state of your earbuds, if charged fully, or the battery is running low.
JBL Endurance Peak 2 support USB TYPE-C, a standard connector for transmitting both data and power in a single cable.
Bose QuietComfort Earbuds II too have USB TYPE-C. This USB-C plug is part and parcel of most current laptops, phones, and tablets.
JBL Endurance Peak 2 have Bluetooth version of 5, Bluetooth is a wireless technology standard that allows data transfers between devices placed in range, using short-wavelength, ultra-high frequency radio waves.
Bose QuietComfort Earbuds II has a Bluetooth version of 5.3,
newer than that of JBL Endurance Peak 2
. Newer versions provide faster data transfers.
JBL Endurance Peak 2 have a 10meters distance to connect via Bluetooth.
Bose QuietComfort Earbuds II have a maximum range of 10meters,
equal to that of the JBL Endurance Peak 2
JBL Endurance Peak 2 support AAC, a codec that is used for Bluetooth audio. It supports 24-bit audio at 250kbps. Because it uses psychoacoustic modeling, it provides better results than other codecs at the same bit rate.
Since its the highest quality codec that any Bluetooth-supporting Apple product supports, the JBL Endurance Peak 2 will work well with your MacBook. If you intend on using these with Android , ensure that they also support aptX HD, LDAC, or LHDC as well.
The Bose QuietComfort Earbuds II support AAC as well. Designed to be the successor of the MP3 format, AAC generally achieves higher sound quality than MP3 encoders at the same bit rate.
The Bose QuietComfort Earbuds II support APTX Adaptive, an audio codec for Bluetooth devices that are developed by Qualcomm. It has a variable bit rate (between 279kbps and 420kbps).
JBL Endurance Peak 2 have 2 microphones.
While the Bose QuietComfort Earbuds II microphones are 8,
more than that of JBL Endurance Peak 2 by 6
. More microphones record better sound quality and help the earbuds to filter out noise.
Bose QuietComfort Earbuds II use a noise-canceling type of microphone, these microphones are made to reduce background sounds from the desired sound.
JBL Endurance Peak 2 microphone sensitivity is measured at -38dBV/Pa. The extent of the analog or digital output signal from the microphone with its input stimulus is a calculation of its sensitivity. It's the 'loudness' of the voice that the earbud microphone can recognize.
The Bose QuietComfort Earbuds II support ambient sound mode, which uses microphones to pass through ambient sound so that they can still be heard even when wearing the earbuds
Bose QuietComfort Earbuds II have in/on-ear detection, the sensors in the device can detect when they are removed from your ears so that the music is paused.
If lost in a room, or can't easily find them in your bag, the Bose QuietComfort Earbuds II have a find earbuds feature.
The JBL Endurance Peak 2 support fast charging. Most often, technologies like Qualcomm’s Quick Charge, are used to reduce the time it takes to charge a device.
Bose QuietComfort Earbuds II too support fast charging. It's very similar to regular charging, only that the battery is filling up much faster. For example, with Quick Charge 3.0, the battery is charged to 50% in just thirty minutes.
Bose QuietComfort Earbuds II support multipoint of 2 connections, the multipoint feature allows you to link to more than one Bluetooth device and switch between them. Say, you can seemlessly switch calls from one device to another without manually disconnect and reconnect.
The Bose QuietComfort Earbuds II have a mute function, they support the feature to mute/unmute a conversation directly from the earbuds.
The JBL Endurance Peak 2, so you can access the volume control, pause, play, mute, etc whichever functions are supported on the device.
The Bose QuietComfort Earbuds II also have a control panel on them.
The JBL Endurance Peak 2 have a warranty period of 1 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use that has followed instruction manuals.
The JBL Endurance Peak 2 have voice prompts. Automatically receive information via audio messages, like if there is a problem with the connection.
The Bose QuietComfort Earbuds II too support voice prompts .i.e the device notifies you if the battery is low, and you need to recharge the device.
The JBL Endurance Peak 2 come with a special case. Carrying earbuds openly, or placing them in your bag without a casing may easily damage them.
Bose QuietComfort Earbuds II also have a case included, which offers safe transportation.