Overall Score 6.4 Represents average audio ecosystem compatibility score.
Overall Score 5.7 Represents average audio ecosystem compatibility score.
Category | Features | JEET W1S | JBL Endurance Peak 2 |
---|---|---|---|
DESIGN | ingress protection (ip) rating | IPX5 | IPX7 |
weight | 18g | 26g | |
has no wires or cables | ✗ | ✓ | |
wingtips included | ✓ | ✓ | |
sweat resistance | ✓ | ✓ | |
has stereo speakers | ✓ | ✓ | |
SOUND QUALITY | has passive noise reduction | ✓ | ✓ |
driver unit size | 11mm | 10mm | |
lowest frequency | 20Hz | 20Hz | |
highest frequency | 20000Hz | 20000Hz | |
sound pressure level | 93dB/mW | 93dB/mW | |
POWER | battery life | 11hours | 6hours |
battery life of charging case | ✗ | 24hours | |
charge time | ✗ | 2hours | |
battery power | ✗ | 60mAh | |
has a battery level indicator | ✓ | ✓ | |
CONNECTIVITY | has usb type-c | ✗ | ✓ |
bluetooth version | v4.1 | v5 | |
maximum bluetooth range | 10meters | 10meters | |
has aac | ✓ | ✓ | |
has ldac | ✓ | ✗ | |
has aptx adaptive | ✓ | ✗ | |
has aptx low latency | ✓ | ✗ | |
has aptx hd | ✓ | ✗ | |
audio latency | 88ms | ✗ | |
MICROPHONE | number of microphones | 1only | 2only |
mic sensitivity | ✗ | -38dBV/Pa | |
EXTRAS | has ambient sound mode | ✓ | ✗ |
has in/on-ear detection | ✓ | ✗ | |
has find earbuds feature | ✓ | ✗ | |
supports fast charging | ✓ | ✓ | |
has a mute function | ✓ | ✗ | |
control panel placed on a device | ✓ | ✓ | |
warranty period | 1Years | 1Years | |
has voice prompts | ✓ | ✓ | |
travel bag is included | ✓ | ✓ | |
See price on Amazon | See price on Amazon |
IP ratings refer to the level of protection given by an enclosure, against dust and water. In the format of IPXX, 'X' represents a number The first value refers to protection against solids say dust, followed by the one that refers to protection against liquids (water).
Scoring IPX7, the JBL Endurance Peak 2's rating for solids indicates that no data available to specify a protection rating, and of liquids that they are protected against temporary immersion in water under set conditions, say 1 metre for 30 minutes.
Compared to the JBL Endurance Peak 2, JEET W1S have a rating of IPX5 meaning that
we are not yet certain of their rating with solids (dust)
and that of liquids is that,
JBL Endurance Peak 2 has a higher liquid rating than JEET W1S
JBL Endurance Peak 2 have a weight of 26g . We consider a lower weight best because lighter devices are more comfortable to carry.
The JEET W1S, at 18g
weigh less than the JBL Endurance Peak 2 by -8g
For a device to be true wireless it should have no wires linking any part of the device together, JBL Endurance Peak 2 are true wireless for this case since they don't have wires. This is an important difference as some wireless earbuds have wires linking the two earbuds .
JBL Endurance Peak 2 have wingtips, these are reserved for earbuds for workouts and come as an optional add-on to the separate silicone ear tip for a better fit.
JEET W1S too have wingtips, these rest against the triangular fossa and form a secure fit to combat vigorous movement, they are best suited for sports and other physical activities. If applied correctly, they prevent the earbuds from falling off.
JBL Endurance Peak 2 have sweat resistance
JEET W1S's resistance to sweat makes both devices good for use while doing sports such as long-distance running, marathons, training in workout bodysuits, etc
JBL Endurance Peak 2 have stereo speakers, what this means is that JBL Endurance Peak 2's speakers deliver sound from independent channels on both left and right sides, creating a richer sound and a better listening experience.
The JEET W1S also have stereo speakers
JBL Endurance Peak 2 sit well in place, this creates a sound seal that reduces background sounds and also prevents the earbuds voice audio from leaking out at the same.
Both of these devices have passive noise reduction which means that both tone down ambient noise without using ANC to cancel it out.
JBL Endurance Peak 2 driver unit is 10mm in diameter, the bigger the unit the more powerful, and can produce better bass.
A driver unit is basically a mini speaker that produces sound in the earbuds, the unit size determines the sound produced by the earbuds.
JEET W1S driver unit is 11mm in diameter,
making them have a larger driver unit than that of JBL Endurance Peak 2 by 1mm
, as many tend to believe that driver units of a bigger size automatically produce better sound quality.
However, large drivers usually have difficulty producing high frequencies so yes, larger drivers can generate louder sound, but this does not imply that they produce better quality sound.
The JBL Endurance Peak 2's lowest frequency is at 20Hz, low-frequency response measures if and how well an audio device generates low frequencies that can be heard, and if it makes any changes to the signal while at it.
JEET W1S's lowest frequency is at 20Hz, this implies that
both devices can produce equal bass
The JBL Endurance Peak 2's highest frequency is at 20000Hz, high-frequency response shows how well an audio component generates high audible frequencies and if it adjustments to the signal while at it.
JEET W1S's highest frequency is at 20000Hz, this implies that
both devices can produce equal treble
The sound pressure level, is the pressure level of sound, in decibels, dB, JBL Endurance Peak 2's measurement is 93dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
JEET W1S's sound pressure level measurement is 93dB/mW. The sound pressure level, something is can be considered differently by different people, so we need to have a way of getting an objective measurement of sound level expressed in numerical terms.
JBL Endurance Peak 2's battery life is 6 hours, these last longer than 5 hours of listening which is considered average for a single charge. A device's battery life is usually given by the manufacturer, and with longer battery life, you get to use it for longer and have to charge the device less often.
JEET W1S's battery life is
more than that of JBL Endurance Peak 2 by 5 hours
. Every time you recharge your device, they get a little less playing time. The effect is barely noticeable at first, but over a few years, your wireless earbuds will have shorter listening time.
The battery life of the charging case is given by the manufacturer, and JBL Endurance Peak 2's case has a charge of 24 hours. A charging case with more battery hours enables you to recharge your earbuds on the go multiple times before having to recharge the case itself.
It requires 2 hours to fully charge the JBL Endurance Peak 2's battery. It is highly adivsable to charge fully the battery before using the earbuds for the first time.
JBL Endurance Peak 2's battery capacity is 60mAh, battery capacity, represents the amount of electrical energy that a battery can keep.
The JBL Endurance Peak 2 have a battery level indicator, an indicator notifies you when the device has a low battery. Its lights show the charging state of your device and charging case.
JEET W1S too have a battery level indicator, charging indicators allow you determine the charging state of your earbuds, if charged fully, or having a low battery.
JBL Endurance Peak 2 support USB TYPE-C, a standard connector for transmitting both data and power in a single cable.
The JBL Endurance Peak 2 have Bluetooth version of 5, Bluetooth is a wireless technology standard that enables data transfers between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves.
JEET W1S has a Bluetooth version of 4.1,
older than that of JBL Endurance Peak 2
. Newer versions provide faster data transfers.
The JBL Endurance Peak 2 have a 10meters distance connecting via Bluetooth.
JEET W1S have a maximum range of 10meters,
equal to that of the JBL Endurance Peak 2
JBL Endurance Peak 2 support AAC, a codec that is used for Bluetooth audio. It supports 24-bit audio at 250kbps. Since it uses psychoacoustic modeling, it provides better results than other codecs at a similar bit rate.
Being the highest quality codec that any Bluetooth-supporting Apple product supports, the JBL Endurance Peak 2 will work well with your MacBook. If you intend on using these with Android you need to pay even closer attention to codec support for if they only have AAC they won't provide the best audio quality possible, ensure that they also support aptX HD, LDAC, or LHDC as well.
The JEET W1S support AAC as well. Designed to be the successor of the MP3 format, AAC generally achieves higher sound quality than MP3 encoders at the same bit rate.
The JEET W1S support LDAC, a codec developed by Sony which allows streaming high-resolution audio over Bluetooth connections at up to 990 kbps at 32 bit/96 kHz. It can reach a high bitrate of 990kbps, which provides high-resolution audio.
JEET W1S support APTX Adaptive, an audio codec for Bluetooth devices that are developed by Qualcomm. It has a variable bit rate (between 279kbps and 420kbps).
JEET W1S support APTX Low Latency, a codec developed by Qualcomm. It uses Bluetooth 5.0 technology to provide low latency audio (around 40ms), which is useful when you want to avoid audio lag for example when playing games.
The JEET W1S support APTX HD, an audio codec for Bluetooth devices that are developed by Qualcomm. It supports high-quality 24-bit audio (at a bit rate of 576kbps).
Latency refers to the time it takes for the audio signal to be transmitted to your earbuds. JEET W1S have a latency of 88ms, a lower latency reduces audio lag and is particularly important when playing games or watching videos.
The JBL Endurance Peak 2 have 2 microphones.
JEET W1S microphones are 1,
less than that of JBL Endurance Peak 2 by 1
. More microphones record better sound quality and help the device to filter out background sounds.
The JBL Endurance Peak 2 microphone sensitivity is measured at -38dBV/Pa. The extent of the analog or digital output signal from the microphone with its input stimulus is a calculation of its sensitivity. It's the 'loudness' of the voice that the microphone can recognize.
JEET W1S support ambient sound mode, which uses microphones to pass through ambient noises to still be heard even while wearing the earbuds
The JEET W1S support in/on-ear detection, the sensors in the earbuds can detect when they are removed from your ears so that the music is paused.
When lost in a room, or can't be found in your bag, the JEET W1S support the find earbuds feature.
The JBL Endurance Peak 2 support fast charging. Commonly, technologies like Qualcomm’s Quick Charge, are used to reduce the amount of time it takes to fully charge the earbuds.
Also the JEET W1S too support fast charging. It's very similar to regular charging, just that the battery is filling up much faster. Say, with Quick Charge 3.0, the battery is charged to 50% in just 30 minutes.
The JEET W1S have a mute function, they have the option to mute/unmute a conversation directly from the device.
The JBL Endurance Peak 2, so you can easily access the volume control, pause, play, mute, etc whichever features are supported on the earbuds.
The JEET W1S too have a control panel on them.
The JBL Endurance Peak 2 have a warranty period of 1 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use following instruction manuals.
If covered under the manufacturer’s warranty it is possible to get a replacement in the case of a malfunction. JEET W1S have a warranty period of 1Years,
equal to that of the JBL Endurance Peak 2
.
The JBL Endurance Peak 2 have voice prompts. Automatically receive information through audio messages, say if there is an issue with the connection.
The JEET W1S also have voice prompts meaning the earbuds will notify you when the battery is running low, and it's time to recharge the device.
JBL Endurance Peak 2 come with a special pouch. Carrying earphones openly, or putting them in your bag without a casing can easily put them at risk of getting damaged.
JEET W1S too have a case included, which is useful for safe transportation.