LG Tone Free Fit TF8See price on Amazon
Overall Score 6.8 Represents average audio ecosystem compatibility score.
JBL Endurance Peak 2See price on Amazon
Overall Score 5.7 Represents average audio ecosystem compatibility score.
|Category||Features||LG Tone Free Fit TF8||JBL Endurance Peak 2|
|DESIGN||ingress protection (ip) rating||IP67||IPX7|
|has no wires or cables||✓||✓|
|is dust proof and water-resistant||✓||✗|
|has stereo speakers||✓||✓|
|SOUND QUALITY||has active noise cancellation (noise control)||✓||✗|
|has passive noise reduction||✓||✓|
|driver unit size||6mm||10mm|
|sound pressure level||✗||93dB/mW|
|battery life of charging case||20hours||24hours|
|has wireless charging||✓||✗|
|has a battery level indicator||✓||✓|
|CONNECTIVITY||has usb type-c||✓||✓|
|maximum bluetooth range||10meters||10meters|
|MICROPHONE||number of microphones||6only||2only|
|has a noise-canceling microphone||✓||✗|
|EXTRAS||has ambient sound mode||✓||✗|
|has in/on-ear detection||✓||✗|
|supports fast charging||✓||✓|
|has a mute function||✓||✗|
|control panel placed on a device||✓||✓|
|has voice prompts||✓||✓|
|travel bag is included||✓||✓|
|See price on Amazon||See price on Amazon|
IP ratings is the rank of protection given by an enclosure, against solids and water. The letters 'IP' are followed by two values The first value refers to protection against solids such as dust, while the second refers to protection against liquids (water).
Scoring IPX7, the JBL Endurance Peak 2's rating for solids indicates that no data available to specify a protection rating, and of liquids that they are protected against temporary immersion in water under set conditions, say 1 metre for 30 minutes.
In comparison to the JBL Endurance Peak 2, LG Tone Free Fit TF8 have a rating of IP67 meaning that they are completely dust proof and that of liquids is that, they both have the same rating against liquids
The JBL Endurance Peak 2 have a weight of 26g . We consider a lower weight better for the reason that lighter devices are more comfortable to transport.
LG Tone Free Fit TF8, at 5.7g are lighter than the JBL Endurance Peak 2 with a difference -20.3g
For a device to be true wireless it should have no wires connecting any part of the device together, JBL Endurance Peak 2 are true wireless for this matter since they have no wires. This is a key difference since wireless earbuds have wires connecting the two earbuds together.
LG Tone Free Fit TF8 also is true wireless because it has no cables connecting the two earbuds together.
JBL Endurance Peak 2 have wingtips, these are reserved for earbuds for workouts and come as an optional add-on to the separate silicone ear tip for a more secure fit.
LG Tone Free Fit TF8 too have wingtips, by resting against the triangular fossa and form a secure fit to match vigorous movement, they are best suited for sports and other physical activities. When used rightly, they prevent the earbuds from falling off.
JBL Endurance Peak 2 have sweat resistance
LG Tone Free Fit TF8's resistance to sweat makes both devices fit for use during long-distance running, marathons, cardio sweat workouts , etc
LG Tone Free Fit TF8 are both dustproof and water-resistant.
JBL Endurance Peak 2 have stereo speakers, devices with stereo speakers deliver sound from separate channels on both left and right sides, this creates a richer sound and a better listening experience.
The LG Tone Free Fit TF8 also have stereo speakers
Active noise cancellation utilises more advanced technology to actively counter noise. How it works, it detects and analyzes the sound pattern outside and inside the earbud and then generates a mirror signal to counter it. In simple terms, it's like having +1 (noise) and adding -1 (counter sound by the device) to make 0 resulting in a reduced level of noise.
LG Tone Free Fit TF8 have Active Noise Cancellation enabling you to listen at lower levels of volume, good for your ears as you don't need to crank up the device volume to overcome background sounds.
The JBL Endurance Peak 2 sit tightly in place, creating a sound seal that tones down background sounds and also prevents the earbuds voice audio from leaking out at the same.
Both of these devices have passive noise reduction which implies that they tone down ambient noise instead of actively using ANC to cancel it out.
The JBL Endurance Peak 2 driver unit is 10mm in diameter, bigger drivers are more powerful, therefor producing better bass.
The driver unit is basically a mini speaker that produces sound in the earbuds, its size corellates with the loudness of the device.
LG Tone Free Fit TF8 driver unit is 6mm in diameter, which implies that they have a smaller driver unit than that of JBL Endurance Peak 2 by 4mm , as many tend to believe that driver units of a bigger size automatically produce better sound quality.
However, large drivers find it difficult to produce high frequencies so yes, larger drivers can generate louder sound, but this does not indicate that they produce better quality sound.
The JBL Endurance Peak 2's lowest frequency is at 20Hz, low-frequency response measures if and how well an audio component produces low audible frequencies and if it alters the signal on its way through.
LG Tone Free Fit TF8's lowest frequency is at 20Hz, this implies that both devices can produce equal bass
JBL Endurance Peak 2's highest frequency is at 20000Hz, high-frequency response tells how well a particular audio component generates high audible frequencies and if it makes any adjustments to the signal while at it.
LG Tone Free Fit TF8's highest frequency is at 20000Hz, this implies that both devices can generate equal treble
SPL, is the pressure level of sound, measured in decibels, dB, JBL Endurance Peak 2's measurement is 93dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
JBL Endurance Peak 2's battery life is 6 hours, these last longer than 5 hours of listening which is considered average before recharge. A device's battery life is usually given by the manufacturer, and with more battery hours, you get to use it for longer and have to charge the device less often.
LG Tone Free Fit TF8's battery life is more than that of JBL Endurance Peak 2 by 4 hours . Every time you recharge your earbuds, they get a little less playing time. The effect is not noticeable at first, but over a few years, your wireless earbuds will no longer play for long like they used to.
The battery life of the charging case is given by the manufacturer, and JBL Endurance Peak 2's case is said to have a full charge of 24 hours. A charging case with more battery hours enables you to recharge your earbuds on the go multiple times before recharging the case itself.
LG Tone Free Fit TF8's charging case has a battery life of 20 hours, less than that of JBL Endurance Peak 2 by 4 hours
It takes 2 hours to fully charge the JBL Endurance Peak 2's battery. It is recommended to charge fully the battery before using the earbuds for the first time.
LG Tone Free Fit TF8 takes 1 hours to fully charge the battery, less than that of JBL Endurance Peak 2 by 1 hours
JBL Endurance Peak 2's battery capacity is 60mAh, battery power, represents the amount of electrical energy that a battery can store.
LG Tone Free Fit TF8's battery power is 68mAh. more than that of JBL Endurance Peak 2 by 8mAh
LG Tone Free Fit TF8, the device supports wireless charging. To charge the device, you simply put down on a supported charging pad.
The JBL Endurance Peak 2 have a battery level indicator, an indicator notifies you when the device has a low battery. Its lights show the charging status of your device and charging case.
LG Tone Free Fit TF8 too have a battery level indicator, charging indicators enable you to tell the charging state of your earbuds, whether fully charged, or the battery is running low.
JBL Endurance Peak 2 use USB TYPE-C, an industry-standard connector for transmitting both data and power through a single cable.
LG Tone Free Fit TF8 too support USB TYPE-C. This USB-C plug is part and parcel of most current laptops, phones, and tablets.
The JBL Endurance Peak 2 have Bluetooth version of 5, Bluetooth is a wireless technology standard that enables data transfers between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves.
LG Tone Free Fit TF8 has a Bluetooth version of 5.3, newer than that of JBL Endurance Peak 2 . Newer versions provide faster data transfers.
The JBL Endurance Peak 2 have a 10meters distance to connect via Bluetooth.
LG Tone Free Fit TF8 have a maximum range of 10meters, equal to that of the JBL Endurance Peak 2
JBL Endurance Peak 2 support AAC, a codec used for Bluetooth audio. It supports 24-bit audio at 250kbps. Because it uses psychoacoustic modeling, it can provide better results than other codecs at a similar bit rate.
Since its the highest quality codec that any Bluetooth-supporting Apple product supports, the JBL Endurance Peak 2 will work well with your iPhone. If you are planning on using these with Android you need to pay even closer attention to codec support for if they only have AAC they won't provide the best audio quality possible, ensure that they also support aptX HD, LDAC, or LHDC as well.
The LG Tone Free Fit TF8 support AAC as well. Designed to be the successor of the MP3 format, AAC generally achieves higher sound quality than MP3 encoders at the same bit rate.
JBL Endurance Peak 2 have 2 microphones.
The LG Tone Free Fit TF8 microphones are 6, more than that of JBL Endurance Peak 2 by 4 . More microphones record better sound quality and help the earbuds to filter out noise.
LG Tone Free Fit TF8 have a noise-canceling type of microphone, these microphones are designed to filter out background sounds from the desired sound.
The JBL Endurance Peak 2 microphone sensitivity is measured at -38dBV/Pa. The size of the analog or digital output signal from the microphone with its input stimulus is a measure of its sensitivity. It's the 'loudness' of the sound that the earbud microphone can recognize.
LG Tone Free Fit TF8 support ambient sound mode, which uses microphones to channel ambient noises to still be heard even when wearing the earbuds
The LG Tone Free Fit TF8 have in/on-ear detection, the sensors in the earbuds can detect when removed from your ears so that the music is paused.
The JBL Endurance Peak 2 support fast charging. Commonly, technologies like Qualcomm’s Quick Charge, are used to lower the time it takes to fully charge the earbuds.
LG Tone Free Fit TF8 too support fast charging. It's very similar to regular charging, just that the battery fills up much faster. For example, with Quick Charge 3.0, the battery can be charged to 50% in 30 minutes.
The LG Tone Free Fit TF8 support multipoint of 2 connections, this feature allows you to link to more than one Bluetooth device and switch between them. Say, you can switch calls from one device to another without manually disconnect and reconnect.
The LG Tone Free Fit TF8 have a mute function, they support the feature to mute/unmute a conversation directly from the earbuds.
With the JBL Endurance Peak 2, so you can access the volume control, pause, play, mute, etc whichever functions are supported on the earbuds.
The LG Tone Free Fit TF8 too have a control panel on them.
The JBL Endurance Peak 2 have a warranty period of 1 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use following instruction manuals.
The JBL Endurance Peak 2 have voice prompts. With voice prompts, you receive information via audio messages, say if there is a problem with the connection.
LG Tone Free Fit TF8 too have voice prompts .i.e the earbuds will notify you when the battery is running low, and you need to recharge the device.
JBL Endurance Peak 2 come with a special pouch. Carrying earbuds openly, or placing them inside your bag without a casing may easily damage them.
LG Tone Free Fit TF8 also have a travel bag included, which offers safe transportation.