Overall Score 5.7 Represents average audio ecosystem compatibility score.
Overall Score 5.1 Represents average audio ecosystem compatibility score.
Ingress protection ratings refer to the rating of protection given by a casing, against solids and liquids. The letters 'IP' are followed by two values The first value of the IP rating refers to protection against solids such as dust, followed by the one that refers to resistance against liquids (water).
Having a value of IPX7, the JBL Endurance Peak 2's rating for solids indicates that no data available to specify a protection rating, and the second value of 7 means that they are protected against temporary immersion in water under set conditions, say 1 metre for 30 minutes.
In comparison to the JBL Endurance Peak 2, Nokia Clarity Earbuds 2 Pro have a rating of IPX4 meaning that
we are not yet certain of their rating with solids (dust)
and that of liquids is that,
Nokia Clarity Earbuds 2 Pro has a lower liquid rating than JBL Endurance Peak 2
The JBL Endurance Peak 2 have a weight of 26g . We consider a lower weight better for the reason that lighter devices are more comfortable to carry.
For a device to be true wireless it should have no wires connecting any part of the device together, JBL Endurance Peak 2 are true wireless for this case since they don't have cables. This is a major difference as some wireless earbuds have wires connecting the pair of earbuds .
Nokia Clarity Earbuds 2 Pro also is true wireless because it has no cables connecting the pair of earbuds .
The JBL Endurance Peak 2 come with wingtips, these are commonly used for earbuds for workouts and are usually an optional add-on to each silicone ear tip for a better fit.
JBL Endurance Peak 2 have sweat resistance
Nokia Clarity Earbuds 2 Pro's resistance to sweat makes both devices fit for use while doing sports such as long-distance running, marathons, training in workout bodysuits, etc
An earbud foam is made to be ultracompact and lightweight, with almost no interference with earrings, spectacles, hats, or hairstyles. The Nokia Clarity Earbuds 2 Pro have an earbud foam to some it is more comfortable than the in-ear foam.
JBL Endurance Peak 2 have stereo speakers, devices with stereo speakers deliver sound from independent channels on both left and right sides, creating a richer sound and a better listening experience.
The Nokia Clarity Earbuds 2 Pro also have stereo speakers
ANC uses more advanced technology to reduce ambient sounds. How it works, it studies the sound pattern outside and inside the earbud and then generates a mirror signal to counter it. In simple terms, it's like having +1 (noise) and producing -1 (counter sound by the device) to make zero thus "diluting" the noise.
Nokia Clarity Earbuds 2 Pro have ANC allowing you to listen at lower volume levels, causing less ear fatigue since you don't need to crank up the earbuds volume to overcome background noise.
JBL Endurance Peak 2 sit well in place, creating a sound covering that reduces your environment noise while preventing the earbuds music from leaking out at the same.
Both of these devices have passive noise reduction which implies that they reduce ambient noise instead of actively using ANC to cancel it out.
JBL Endurance Peak 2 driver unit is 10mm in diameter, bigger drivers are more powerful, therefor producing better bass.
The driver unit is basically a mini speaker that produces sound in the earbuds, its size dictates the sound produced by the device.
Nokia Clarity Earbuds 2 Pro driver unit is 13mm in diameter,
making them have a larger driver unit than that of JBL Endurance Peak 2 by 3mm
, as many tend to believe that driver units of a bigger size automatically produce better sound quality.
However, large drivers usually have difficulty producing high frequencies so it's true that, larger drivers can generate louder sound, but this does not mean that they deliver better quality sound.
The JBL Endurance Peak 2's lowest frequency is at 20Hz, low-frequency response measures if and how well a particular audio device produces low frequencies that can be heard, and if it makes any changes to the signal while at it.
Nokia Clarity Earbuds 2 Pro's lowest frequency is at 20Hz, this implies that
both devices can make sound with equal bass
JBL Endurance Peak 2's highest frequency is at 20000Hz, high-frequency response shows how well a particular audio device produces high recognizable frequencies and if it makes any changes to the signal while at it.
Nokia Clarity Earbuds 2 Pro's highest frequency is at 20000Hz, this means that
both devices can generate equal treble
SPL, is the level of pressure of sound, in decibels, dB, JBL Endurance Peak 2's measurement is 93dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
The JBL Endurance Peak 2's battery life is 6 hours, a device's battery life is usually given by the manufacturer, and with more battery hours, you get to use it for longer and requires fewer chanrgings.
Nokia Clarity Earbuds 2 Pro's battery life is
more than that of JBL Endurance Peak 2 by 3 hours
. Each time you recharge your device, they get a little less listening time. The effect is not noticeable at first, but over a few years, your wireless earbuds will have shorter listening time.
This is given by the vendor, and the JBL Endurance Peak 2's case is said to have a full charge of 24 hours. A charging case with a longer battery life allows you to recharge your earbuds on the go many times before having to recharge the case itself.
Nokia Clarity Earbuds 2 Pro's charging case has a battery life of 25 hours,
more than that of JBL Endurance Peak 2 by 1 hours
It takes 2 hours to fully charge the JBL Endurance Peak 2's battery. It is recommended to charge fully the battery before using the earbuds when they have been unused for extended periods.
Nokia Clarity Earbuds 2 Pro takes 2 hours to fully charge the battery,
equal to that of the JBL Endurance Peak 2
JBL Endurance Peak 2's battery capacity is 60mAh, battery power, represents the amount of electrical energy that a battery can store.
Nokia Clarity Earbuds 2 Pro's battery power is 60mAh.
equal to that of the JBL Endurance Peak 2
JBL Endurance Peak 2 have a battery level indicator, an indicator alerts you when the device has a low battery. The battery indicator lights show the charging state of your device and charging case.
Nokia Clarity Earbuds 2 Pro too have a battery level indicator, these enable you determine the charging state of your device, whether fully charged, or having a low battery.
JBL Endurance Peak 2 use USB TYPE-C, a standard connector for transmitting both data and power in a single cable.
Nokia Clarity Earbuds 2 Pro too have USB TYPE-C. This USB-C plug is part and parcel of most current electronics.
JBL Endurance Peak 2 have Bluetooth version of 5, Bluetooth is a wireless technology standard that enables data transfers between devices placed in range, using short-wavelength, ultra-high frequency radio waves.
Nokia Clarity Earbuds 2 Pro has a Bluetooth version of 5.2,
newer than that of JBL Endurance Peak 2
. Newer versions provide faster data transfers.
The JBL Endurance Peak 2 have a 10meters distance to connect via Bluetooth.
Nokia Clarity Earbuds 2 Pro have a maximum range of 10meters,
equal to that of the JBL Endurance Peak 2
JBL Endurance Peak 2 support AAC, a codec that is used for Bluetooth audio. It supports 24-bit audio at 250kbps. Since it uses psychoacoustic modeling, it provides better results than other codecs at the same bit rate.
Since its the highest quality codec that any Bluetooth-supporting Apple product supports, the JBL Endurance Peak 2 will work fine with your iPhone. If you intend on using these with Android you need to pay even closer attention to codec support for if they only have AAC they won't provide the best audio quality possible, ensure that they also support aptX HD, LDAC, or LHDC as well.
JBL Endurance Peak 2 have 2 microphones.
Nokia Clarity Earbuds 2 Pro have a noise-canceling type of microphone, these microphones are designed to filter out noise from the earbuds' sound.
JBL Endurance Peak 2 microphone sensitivity is measured at -38dBV/Pa. The extent of the analog or digital output signal from the microphone with its input stimulus is a calculation of its sensitivity. It's the 'loudness' of the voice that the earbud microphone can recognize.
The JBL Endurance Peak 2 support fast charging. Commonly, technologies like MediaTek’s Pump Express, are used to reduce the amount of time it takes to fully charge the earbuds.
Also the Nokia Clarity Earbuds 2 Pro support fast charging. This kind is similar to regular charging, only that the battery fills up much faster. Say, with Quick Charge 3.0, the battery is charged to 50% in just 30 minutes.
Nokia Clarity Earbuds 2 Pro have a mute function, they have the feature to mute/unmute a conversation directly from the device.
With the JBL Endurance Peak 2, so you can easily access the volume control, pause, play, mute, etc whichever features are supported on the earbuds.
Nokia Clarity Earbuds 2 Pro also have a control panel on them.
JBL Endurance Peak 2 have a warranty period of 1 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use following instruction manuals.
JBL Endurance Peak 2 have voice prompts. Automatically receive information via audio messages, say if there is a problem with the connection.
The Nokia Clarity Earbuds 2 Pro also have voice prompts meaning the earbuds notifies you when the battery is low, and you need to recharge them.
The JBL Endurance Peak 2 come with their own special pouch. Carrying earbuds openly, or putting them inside your pockets without a casing may easily damage them.
Nokia Clarity Earbuds 2 Pro also have a travel bag included, which offers safe transportation.