Has Active Noise Cancellation (Noise Control)
JBL Endurance Peak 2
✗
Nuraphone NuraTrue ✓
ANC uses advanced technology to actively cancel noise. ANC works when, it detects and analyzes the sound pattern outside and inside the earbud and after generates a mirror signal to counter it. Simply put, it's like having +1 (sound from your surrounding) then adding -1 (inverted noise) to make zero resulting in a reduced level of noise.
Nuraphone NuraTrue have Active Noise Cancellation allowing you to listen at lower levels of volume, good for your ears since you don't have to crank up the device volume to overcome background noise.
Has Passive Noise Reduction
JBL Endurance Peak 2
✓
Nuraphone NuraTrue ✓
The JBL Endurance Peak 2 stay well in place, this creates an acoustic seal that tones down your environment noise and also prevents the device sound from leaking out at the same.
Both of these devices have passive noise reduction which implies that they reduce ambient noise without using ANC to cancel it out.
Driver Unit Size
JBL Endurance Peak 2
10mm
Nuraphone NuraTrue 10mm
JBL Endurance Peak 2 have a unit size of 10mm in diameter, bigger drivers are more powerful, therefor producing better bass.
The driver unit is the component that makes sound in the earbuds, the unit size corellates with the loudness of the device.
Nuraphone NuraTrue driver unit is 10mm in diameter,
making both devices similar in how loud their sound can get
, many people have a misconception that driver units of a bigger size automatically produce better sound quality.
However, large drivers find it difficult to produce high frequencies so yes, larger drivers can generate louder sound, but this does not indicate that they deliver better quality sound.
Lowest Frequency
JBL Endurance Peak 2
20hz
Nuraphone NuraTrue 20hz
The JBL Endurance Peak 2's lowest frequency is at 20Hz, low-frequency response inidcates how well an audio component produces low frequencies that can be heard, and if it alters the signal on its way through.
Nuraphone NuraTrue's lowest frequency is at 20Hz, this implies that
both devices make sound with equal bass
Highest Frequency
JBL Endurance Peak 2
20,000hz
Nuraphone NuraTrue 20,000hz
The JBL Endurance Peak 2's highest frequency is at 20,000Hz, high-frequency response measures if and how well a particular audio device makes high recognizable frequencies and if it makes any changes to the signal on its way through.
Nuraphone NuraTrue's highest frequency is at 20,000Hz, this means that
both devices can produce equal treble
Sound Pressure Level
JBL Endurance Peak 2
93db/mw
Nuraphone NuraTrue 108db/mw
The sound pressure level, is the pressure level of sound, measured in decibels, dB, JBL Endurance Peak 2's measurement is 93dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
Nuraphone NuraTrue's sound pressure level measurement is 108dB/mW. How loud a device is can be perceived differently by separate persons, so we need to have the means to get an objective measurement of sound level expressed in numerical terms.
A Review By Comparison Of The Jbl Wave Beam Vs. Jbl Endurance Peak 2
A Review By Comparison Of The Audio Technica Ath Cks50Tw Vs. Jbl Endurance Peak 2
A Review By Comparison Of The Jbl Tune Flex Vs. Jbl Endurance Peak 2