Overall Score 5.7 Represents average audio ecosystem compatibility score.
Overall Score 5.7 Represents average audio ecosystem compatibility score.
Category | Features | JBL Endurance Peak 2 | Soundpeats Air 3 Deluxe HS |
---|---|---|---|
DESIGN | ingress protection (ip) rating | IPX7 | IPX4 |
weight | 26g | 8.12g | |
has no wires or cables | ✓ | ✓ | |
wingtips included | ✓ | ✗ | |
sweat resistance | ✓ | ✓ | |
has an earbud foam | ✗ | ✓ | |
has stereo speakers | ✓ | ✓ | |
SOUND QUALITY | has passive noise reduction | ✓ | ✗ |
driver unit size | 10mm | 14.2mm | |
lowest frequency | 20Hz | 20Hz | |
highest frequency | 20000Hz | 40000Hz | |
sound pressure level | 93dB/mW | ✗ | |
POWER | battery life | 6hours | 5hours |
battery life of charging case | 24hours | 15hours | |
charge time | 2hours | 1.5hours | |
battery power | 60mAh | 30mAh | |
has a battery level indicator | ✓ | ✓ | |
CONNECTIVITY | has usb type-c | ✓ | ✓ |
bluetooth version | v5 | v5.2 | |
maximum bluetooth range | 10meters | 10meters | |
has aac | ✓ | ✗ | |
has ldac | ✗ | ✓ | |
audio latency | ✗ | 60ms | |
MICROPHONE | number of microphones | 2only | 4only |
has a noise-canceling microphone | ✗ | ✓ | |
mic sensitivity | -38dBV/Pa | ✗ | |
EXTRAS | has find earbuds feature | ✗ | ✓ |
supports fast charging | ✓ | ✓ | |
has a mute function | ✗ | ✓ | |
control panel placed on a device | ✓ | ✓ | |
warranty period | 1Years | ✗ | |
has voice prompts | ✓ | ✓ | |
travel bag is included | ✓ | ✓ | |
See price on Amazon | See price on Amazon |
Ingress protection ratings refer to the rating of protection offered by a casing, against dust and water. The letters 'IP' are followed by two values The first value of the IP rating means protection against solids say dust, followed by the one that refers to resistance against liquids (water).
Having a value of IPX7, the JBL Endurance Peak 2's rating is read as, the first number of X denotes that no data available to specify a protection rating, and of liquids that they are protected against temporary immersion in water under set conditions, say 1 metre for 30 minutes.
Compared to the JBL Endurance Peak 2, Soundpeats Air 3 Deluxe HS have a rating of IPX4 meaning that
we are not yet certain of their rating with solids (dust)
and that of liquids is that,
Soundpeats Air 3 Deluxe HS has a lower liquid rating than JBL Endurance Peak 2
JBL Endurance Peak 2 have a weight of 26g . We prefer a lower weight best for the reason that lighter devices are easier to transport.
The Soundpeats Air 3 Deluxe HS, at 8.12g
are lighter than the JBL Endurance Peak 2 with a difference -17.88g
For a device to be true wireless it should have no cables linking any part of the device together, JBL Endurance Peak 2 are true wireless for this case since they don't have wires. This is an important distinction as some wireless earbuds have cables connecting the 2 earbuds .
Soundpeats Air 3 Deluxe HS also is true wireless because it doesn't have cables connecting the two earbuds together.
JBL Endurance Peak 2 have wingtips, these are reserved for earbuds for workouts and come as an optional add-on to the separate silicone ear tip for a better fit.
JBL Endurance Peak 2 are resistant to sweat
Soundpeats Air 3 Deluxe HS's resistance to sweat makes both devices fit for use while doing sports such as long-distance running, marathons, training in workout bodysuits, etc
An earbud foam is made to be ultracompact and lightweight, with little interference with earrings, spectacles, hats, or hairstyles. The Soundpeats Air 3 Deluxe HS have an earbud foam for some people it is more comfortable than the in-ear foam.
JBL Endurance Peak 2 have stereo speakers, devices with stereo speakers deliver sound from independent channels on both left and right sides, creating a richer sound and a better listening experience.
The Soundpeats Air 3 Deluxe HS also have stereo speakers
The JBL Endurance Peak 2 sit well in place, this creates an acoustic seal that tones down background noise and also prevents the earbuds voice audio from leaking out at the same.
JBL Endurance Peak 2 driver unit is 10mm in diameter, the bigger the unit the more powerful, therefor producing better bass.
The driver unit is the component that produces sound in the earbuds, its size determines the sound produced by the earbuds.
Soundpeats Air 3 Deluxe HS driver unit is 14.2mm in diameter,
making them have a larger driver unit than that of JBL Endurance Peak 2 by 4.2mm
, as many tend to believe that driver units of a bigger size automatically produce better sound quality.
However, large drivers find it difficult to produce high frequencies so yeah, larger drivers are capable of generating louder sound, but this does not mean that they deliver better quality sound.
JBL Endurance Peak 2's lowest frequency is at 20Hz, low-frequency response measures if and how well a particular audio device produces low frequencies that can be heard, and if it alters the signal on its way through.
Soundpeats Air 3 Deluxe HS's lowest frequency is at 20Hz, this implies that
both devices produce equal bass
The JBL Endurance Peak 2's highest frequency is at 20000Hz, high-frequency response indicates how well a particular audio component produces high audible frequencies and if it makes any adjustments to the signal on its way through.
Soundpeats Air 3 Deluxe HS's highest frequency is at 40000Hz, this implies that
Soundpeats Air 3 Deluxe HS generate a clearer and crispier treble than the JBL Endurance Peak 2
SPL, is the pressure level of sound, in decibels, dB, JBL Endurance Peak 2's measurement is 93dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
JBL Endurance Peak 2's battery life is 6 hours, these last longer than 5 hours of listening which is considered average before recharge. A device's battery life is given by the manufacturer, and with longer battery life, you get to use it for longer and requires fewer chargings.
Soundpeats Air 3 Deluxe HS's battery life is
less than that of JBL Endurance Peak 2 by 1 hours
. Each time you recharge your earbuds, they get a little less listening time. The effect is barely noticeable at first, but over a few years, your wireless earbuds will no longer play for long like they used to.
The battery life of the charging case is given by the manufacturer, and the JBL Endurance Peak 2's case is said to have a full charge of 24 hours. A charging case with a longer battery life allows you to recharge your earbuds on the go multiple times before having to recharge the case itself.
Soundpeats Air 3 Deluxe HS's charging case has a battery life of 15 hours,
less than that of JBL Endurance Peak 2 by 9 hours
It takes 2 hours to fully charge the JBL Endurance Peak 2's battery. It is recommended to fully charge the battery before using the earbuds when they have been in storage for extended periods.
Soundpeats Air 3 Deluxe HS takes 1.5 hours to fully charge the battery,
less than that of JBL Endurance Peak 2 by 0.5 hours
JBL Endurance Peak 2's battery capacity is 60mAh, battery power, shows the amount of electrical energy that a battery can keep.
Soundpeats Air 3 Deluxe HS's battery power is 30mAh.
less than that of JBL Endurance Peak 2 by 30mAh
JBL Endurance Peak 2 have a battery level indicator, an indicator alerts you when the earbuds has a low battery. Its lights indicate the charging status of your device and case.
Soundpeats Air 3 Deluxe HS too have a battery level indicator, these enable you determine the charging state of your earbuds, whether fully charged, or having a low battery.
JBL Endurance Peak 2 have USB TYPE-C, a standard connector for transmitting both data and power through a single cable.
Soundpeats Air 3 Deluxe HS too support USB TYPE-C. This USB-C plug comes along with most current laptops, phones, and tablets.
The JBL Endurance Peak 2 have Bluetooth version of 5, Bluetooth is a wireless technology standard that allows data movement between devices placed in range, using short-wavelength, ultra-high frequency radio waves.
Soundpeats Air 3 Deluxe HS has a Bluetooth version of 5.2,
newer than that of JBL Endurance Peak 2
. Newer versions provide faster data transfers.
The JBL Endurance Peak 2 have a 10meters distance to connect via Bluetooth.
Soundpeats Air 3 Deluxe HS have a maximum range of 10meters,
equal to that of the JBL Endurance Peak 2
JBL Endurance Peak 2 support AAC, a codec that is used for Bluetooth audio. It supports 24-bit audio at 250kbps. Because it uses psychoacoustic modeling, it provides better results than other codecs at a similar bit rate.
Since its the highest quality codec that any Bluetooth-supporting Apple product supports, the JBL Endurance Peak 2 will work fine with your MacBook. If you are planning on using these with Android you need to pay even closer attention to codec support for if they only have AAC they won't provide the best audio quality possible, ensure that they also support aptX HD, LDAC, or LHDC as well.
Soundpeats Air 3 Deluxe HS support LDAC, a codec developed by Sony which allows streaming high-resolution audio over Bluetooth connections at up to 990 kbps at 32 bit/96 kHz. It is capable of a very high bitrate of 990kbps, which provides high-resolution audio.
Latency refers to the time it takes for the audio signal to be transmitted to your earbuds. Soundpeats Air 3 Deluxe HS have a latency of 60ms, a lower latency reduces audio lag and is particularly important when playing games or watching videos.
JBL Endurance Peak 2 have 2 microphones.
The Soundpeats Air 3 Deluxe HS microphones are 4,
more than that of JBL Endurance Peak 2 by 2
. More microphones record better sound quality and enable the earbuds to filter out background sounds.
Soundpeats Air 3 Deluxe HS use a noise-canceling microphone, these microphones are designed to filter out background sounds from the earbuds' sound.
The JBL Endurance Peak 2 microphone sensitivity is measured at -38dBV/Pa. The size of the analog or digital output signal from the microphone with its input stimulus is a measure of its sensitivity. It's the 'loudness' of the sound that the earbud microphone can recognize.
When misplaced in a room, or can't easily find them in your bag, Soundpeats Air 3 Deluxe HS support the find earbuds feature.
JBL Endurance Peak 2 support fast charging. Usually, technologies like MediaTek’s Pump Express, are used to lower the amount of time it takes to fully charge a device.
Soundpeats Air 3 Deluxe HS support fast charging. It's very similar to regular charging, only that the battery fills up much faster. For example, with Quick Charge 3.0, the battery can be charged to 50% in 30 minutes.
Soundpeats Air 3 Deluxe HS have a mute function, they support the option to mute/unmute a conversation directly from the device.
With the JBL Endurance Peak 2, so you can easily access the volume control, pause, play, mute, etc whichever features are supported on the earbuds.
Soundpeats Air 3 Deluxe HS too have a control panel on them.
The JBL Endurance Peak 2 have a warranty period of 1 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use following instruction manuals.
JBL Endurance Peak 2 have voice prompts. With voice prompts, you receive information via audio messages, like if there is a problem with the connection.
The Soundpeats Air 3 Deluxe HS too support voice prompts .i.e the earbuds notifies you when the battery is low, and you need to recharge them.
The JBL Endurance Peak 2 come with their own special case. Carrying earphones without a case, or putting them in your bag without a cover can easily damage them.
Soundpeats Air 3 Deluxe HS too have a travel bag included, which is useful for safe transportation.