JBL Endurance Peak 2See price on Amazon
Overall Score 5.7 Represents average audio ecosystem compatibility score.
Tozo T10SSee price on Amazon
Overall Score 5.1 Represents average audio ecosystem compatibility score.
|Category||Features||JBL Endurance Peak 2||Tozo T10S|
|DESIGN||ingress protection (ip) rating||IPX7||IPX8|
|has no wires or cables||✓||✓|
|has stereo speakers||✓||✓|
|waterproof depth rating||✗||1meters|
|SOUND QUALITY||has passive noise reduction||✓||✓|
|driver unit size||10mm||8mm|
|sound pressure level||93dB/mW||✗|
|battery life of charging case||24hours||28hours|
|has a battery level indicator||✓||✓|
|CONNECTIVITY||has usb type-c||✓||✓|
|maximum bluetooth range||10meters||10meters|
|MICROPHONE||number of microphones||2only||2only|
|EXTRAS||supports fast charging||✓||✓|
|has a mute function||✗||✓|
|control panel placed on a device||✓||✓|
|has voice prompts||✓||✓|
|travel bag is included||✓||✓|
|See price on Amazon||See price on Amazon|
Ingress protection ratings refer to the level of protection given by an enclosure, against dust and liquids. In the format of IPXX, 'X' represents a number The first value of the IP rating refers to protection against solids say dust, while the second refers to resistance against liquids (sweat).
Scoring IPX7, the JBL Endurance Peak 2's rating is read as, the first number of X denotes that no data available to specify a protection rating, and of liquids that they are protected against temporary immersion in water under set conditions, say 1 metre for 30 minutes.
Compared to the JBL Endurance Peak 2, Tozo T10S have a rating of IPX8 meaning that we are not yet certain of their rating with solids (dust) and that of liquids is that, JBL Endurance Peak 2 has a lower liquid rating than Tozo T10S
JBL Endurance Peak 2 have a weight of 26g . We prefer a lower weight best because lighter devices are easier to carry.
The Tozo T10S, at 10g are lighter than the JBL Endurance Peak 2 by -16g
True wireless devices have no wires linking any part of the device together, JBL Endurance Peak 2 are true wireless for this case since they have no cables. This is a key difference as some wireless earbuds have wires linking the pair of earbuds together.
Tozo T10S also is true wireless because it doesn't have wires connecting the 2 earbuds together.
JBL Endurance Peak 2 have wingtips, these are reserved for workout earbuds and come as an optional add-on to the separate silicone ear tip for a better fit.
JBL Endurance Peak 2 are resistant to sweat
Tozo T10S's resistance to sweat makes both devices good for use during long-distance running, marathons, cardio sweat workouts , etc
JBL Endurance Peak 2 have stereo speakers, what this means is that JBL Endurance Peak 2's speakers deliver sound from separate channels on both left and right sides, this creates a richer sound and a better listening experience.
The Tozo T10S also have stereo speakers
Tozo T10S are rated 1meters any depth more than that you are likely to lose the functionality of your device. Devices that have a higher depth rating are better for swimming.
The JBL Endurance Peak 2 stay well in place, creating a sound covering that tones down background noise while preventing the earbuds sound from leaking out at the same.
Both of these devices have passive noise reduction this implies that both limit ambient noise without using ANC to cancel it out.
The JBL Endurance Peak 2 driver unit is 10mm in diameter, the bigger the unit the more powerful, therefor producing better bass.
A driver unit is basically a mini speaker that produces sound in the earbuds, its size determines the sound produced by the device.
Tozo T10S driver unit is 8mm in diameter, which means that they have a smaller driver unit than that of JBL Endurance Peak 2 by 2mm , as many tend to believe that driver units of a bigger size automatically produce better sound quality.
However, large drivers find it difficult to produce high frequencies so it's true that, larger drivers can generate louder sound, but this does not mean that they deliver better quality sound.
JBL Endurance Peak 2's lowest frequency is at 20Hz, low-frequency response measures if and how well a particular audio component generates low audible frequencies and if it alters the signal while at it.
Tozo T10S's lowest frequency is at 20Hz, this means that both devices produce equal bass
The JBL Endurance Peak 2's highest frequency is at 20000Hz, high-frequency response measures if and how well an audio device generates high recognizable frequencies and if it makes any changes to the signal on its way through.
Tozo T10S's highest frequency is at 20000Hz, this means that both devices can generate equal treble
SPL, is the level of pressure of sound, measured in decibels, dB, JBL Endurance Peak 2's measurement is 93dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
JBL Endurance Peak 2's battery life is 6 hours, a device's battery life is given by the manufacturer, and with more battery hours, you get to use it for longer and have to charge the device less often.
Tozo T10S's battery life is more than that of JBL Endurance Peak 2 by 2 hours . Every time you recharge your device, they get a little less listening time. The effect is barely noticeable at first, but over time, your wireless earbuds will no longer play for long like they used to.
This is given by the manufacturer, and JBL Endurance Peak 2's case is said to have a full charge of 24 hours. A charging case with more battery hours enables you to recharge your earbuds on the go many times before having to recharge the case itself.
Tozo T10S's charging case has a battery life of 28 hours, more than that of JBL Endurance Peak 2 by 4 hours
It takes 2 hours to fully charge the JBL Endurance Peak 2's battery. It is highly adivsable to fully charge the battery before using the earbuds when they have been in storage for extended periods.
Tozo T10S takes 2 hours to fully charge the battery, equal to that of the JBL Endurance Peak 2
JBL Endurance Peak 2's battery capacity is 60mAh, battery capacity, represents the amount of electrical energy that a battery can store.
JBL Endurance Peak 2 have a battery level indicator, an indicator notifies you when the earbuds has a low battery. The battery indicator lights display the charging state of your earbuds and case.
Tozo T10S too have a battery level indicator, charging indicators allow you tell the charging state of your earbuds, if charged fully, or having a low battery.
The JBL Endurance Peak 2 use USB TYPE-C, an industry-standard connector for transmitting both data and power through a single cable.
Tozo T10S too have USB TYPE-C. This USB-C plug is part and parcel of most current laptops, phones, and tablets.
The JBL Endurance Peak 2 have Bluetooth version of 5, Bluetooth is a wireless technology standard that enables data movement between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves.
Tozo T10S has a Bluetooth version of 5.2, newer than that of JBL Endurance Peak 2 . Newer versions provide faster data transfers.
The JBL Endurance Peak 2 have a 10meters distance connecting via Bluetooth.
Tozo T10S have a maximum range of 10meters, equal to that of the JBL Endurance Peak 2
JBL Endurance Peak 2 support AAC, a codec used for Bluetooth audio. It supports 24-bit audio at 250kbps. Because it uses psychoacoustic modeling, it provides better results than other codecs at the same bit rate.
Since its the highest quality codec that any Bluetooth-supporting Apple product supports, the JBL Endurance Peak 2 will work well with your MacBook. If you intend on using these with Android , ensure that they also support aptX HD, LDAC, or LHDC as well.
The Tozo T10S support AAC as well. Designed to be the successor of the MP3 format, AAC generally achieves higher sound quality than MP3 encoders at the same bit rate.
JBL Endurance Peak 2 have 2 microphones.
Tozo T10S microphones are 2, equal to that of the JBL Endurance Peak 2 . More microphones record better sound quality and help the device to filter out noise.
The JBL Endurance Peak 2 microphone sensitivity is measured at -38dBV/Pa. The size of the analog or digital output signal from the microphone with its input stimulus is a measure of its sensitivity. It's the 'loudness' of the voice that the earbud microphone can recognize.
The JBL Endurance Peak 2 support fast charging. Usually, technologies like MediaTek’s Pump Express, are used to lower the amount of time it takes to charge a device.
Also the Tozo T10S too support fast charging. It's very similar to regular charging, only that the battery fills up much faster. Say, with Quick Charge 3.0, the battery is charged to 50% in just thirty minutes.
The Tozo T10S have a mute function, they support the option to mute/unmute a conversation directly from the earbuds.
The JBL Endurance Peak 2, so you can access the volume control, pause, play, mute, etc whichever functions are supported on the device.
The Tozo T10S also have a control panel on them.
The JBL Endurance Peak 2 have a warranty period of 1 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use that has followed instruction manuals.
The JBL Endurance Peak 2 have voice prompts. With voice prompts, you receive information through audio messages, like if there is a problem with the connection.
The Tozo T10S also have voice prompts .i.e the earbuds will notify you if the battery is running low, and you need to recharge them.
The JBL Endurance Peak 2 come with a special case. Carrying earphones openly, or placing them in your pockets without a cover can easily damage them.
Tozo T10S too have a travel bag included, which offers safe transportation.