JBL Endurance PeakSee price on Amazon
Overall Score 5.1 Represents average audio ecosystem compatibility score.
JBL Tune 225TWSSee price on Amazon
Overall Score 4.7 Represents average audio ecosystem compatibility score.
|Category||Features||JBL Endurance Peak||JBL Tune 225TWS|
|DESIGN||ingress protection (ip) rating||IPX7||✗|
|has no wires or cables||✓||✓|
|is dust proof and water-resistant||✓||✗|
|has an earbud foam||✓||✗|
|has stereo speakers||✓||✓|
|SOUND QUALITY||has active noise cancellation (noise control)||✓||✗|
|has passive noise reduction||✗||✓|
|driver unit size||10mm||12mm|
|sound pressure level||✗||105dB/mW|
|battery life of charging case||24hours||20hours|
|has a battery level indicator||✓||✓|
|CONNECTIVITY||has usb type-c||✗||✓|
|maximum bluetooth range||10meters||10meters|
|MICROPHONE||number of microphones||1only||4only|
|EXTRAS||supports fast charging||✗||✓|
|has a mute function||✗||✓|
|control panel placed on a device||✓||✓|
|has voice prompts||✓||✓|
|travel bag is included||✓||✓|
|See price on Amazon||See price on Amazon|
IP ratings refer to the level of protection offered by a casing, against solids and liquids. The letters 'IP' are followed by two values The first value of the IP rating means protection against solids say dust, while the second refers to resistance against liquids (water).
Scoring IPX7, the JBL Endurance Peak's rating for solids indicates that no data available to specify a protection rating, and of liquids that they are protected against temporary immersion in water under set conditions, say 1 metre for 30 minutes.
The JBL Endurance Peak have a weight of 30g . We consider a lower weight better for the reason that lighter devices are easier to carry.
The JBL Tune 225TWS, at 9.8g weigh less than the JBL Endurance Peak by -20.2g
True wireless devices have no wires linking any part of the device together, JBL Endurance Peak are true wireless for this matter since they don't have wires. This is a major difference as some wireless earbuds have cables connecting the pair of earbuds together.
JBL Tune 225TWS also is true wireless because it doesn't have cables connecting the two earbuds .
JBL Endurance Peak have wingtips, these are reserved for earbuds for workouts and come as an optional add-on to the separate silicone ear tip for a better fit.
JBL Endurance Peak are resistant to sweat
The JBL Endurance Peak are both dustproof and water-resistant.
An earbud foam is made to be ultracompact and lightweight, with almost no interference with earrings, spectacles, hats, or hairstyles. The JBL Endurance Peak have an earbud foam to some it is more comfortable than the in-ear foam.
JBL Endurance Peak have stereo speakers, devices with stereo speakers deliver sound from separate channels on both left and right sides, this creates a richer sound and a better listening experience.
The JBL Tune 225TWS also have stereo speakers
ANC utilises more advanced kind of tech to actively cancel noise. ANC works when, it studies the sound pattern of incoming noise and generates a mirror signal to counter it. Simply put, it's like taking +1 (sound from your surrounding) then producing -1 (counter sound by the device) giving zero thus "diluting" the noise.
The JBL Endurance Peak have Active Noise Cancellation allowing you to listen at lower volume levels, causing less ear fatigue as you don't need to crank up the device volume to outcompete background noise.
The JBL Tune 225TWS stay well in place, this creates an acoustic covering that tones down background sounds while preventing the device sound from leaking out at the same.
The JBL Endurance Peak have a unit size of 10mm in diameter, bigger drivers are more powerful, and can produce better bass.
The driver unit is the component that produces sound in the device, its size corellates with the loudness of the earbuds.
JBL Tune 225TWS driver unit is 12mm in diameter, making them have a larger driver unit than that of JBL Endurance Peak by 2mm , many people have a misconception that driver units of a bigger size automatically produce better sound quality.
However, large drivers find it difficult to produce high frequencies so yes, larger drivers can generate louder sound, but this does not imply that they produce better quality sound.
The JBL Endurance Peak's lowest frequency is at 16Hz, low-frequency response measures if and how well an audio device produces low frequencies that can be heard, and if it alters the signal while at it.
JBL Tune 225TWS's lowest frequency is at 20Hz, this implies that JBL Endurance Peak produce a juicier bass than the JBL Tune 225TWS
The JBL Endurance Peak's highest frequency is at 22000Hz, high-frequency response shows how well an audio device generates high recognizable frequencies and if it makes any changes to the signal while at it.
JBL Tune 225TWS's highest frequency is at 20000Hz, this means that JBL Endurance Peak produce a clearer and crispier treble than the JBL Tune 225TWS
The sound pressure level, is the level of pressure of sound, measured in decibels, dB, JBL Tune 225TWS's measurement is 105dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
JBL Endurance Peak's battery life is 4 hours, these last less than 5 hours of listening which is considered average before recharge. A device's battery life is commonly given by the manufacturer, and with longer battery life, you get to use it for longer and requires fewer chargings.
JBL Tune 225TWS's battery life is more than that of JBL Endurance Peak by 1 hours . Every time you recharge your device, they get a little less playing time. The effect is barely noticeable at first, but over a few years, your wireless earbuds will no longer play for long like they used to.
The battery life of the charging case is given by the vendor, and JBL Endurance Peak's case has a charge of 24 hours. A charging case with a longer battery life enables you to recharge your earbuds on the go several times before recharging the case itself.
JBL Tune 225TWS's charging case has a battery life of 20 hours, less than that of JBL Endurance Peak by 4 hours
It requires 2 hours to fully charge the JBL Endurance Peak's battery. It is highly adivsable to charge fully the battery before using the earbuds when they have been in storage for long periods.
JBL Tune 225TWS takes 2 hours to fully charge the battery, equal to that of the JBL Endurance Peak
JBL Endurance Peak's battery power is 75mAh, battery capacity, represents the amount of electrical energy that a battery can store.
JBL Endurance Peak have a battery level indicator, an indicator shows you when the device has a low battery. Its lights indicate the charging state of your device and case.
JBL Tune 225TWS too have a battery level indicator, these enable you tell the charging state of your earbuds, whether fully charged, or the battery is running low.
The JBL Tune 225TWS use USB TYPE-C, a standard connector for transmitting both data and power in a single cable.
JBL Endurance Peak have Bluetooth version of 4.2, Bluetooth is a wireless technology standard that enables data movement between devices placed in range, using short-wavelength, ultra-high frequency radio waves.
JBL Tune 225TWS has a Bluetooth version of 5, newer than that of JBL Endurance Peak . Newer versions provide faster data transfers.
JBL Endurance Peak have a 10meters distance connecting via Bluetooth.
JBL Tune 225TWS have a maximum range of 10meters, equal to that of the JBL Endurance Peak
JBL Tune 225TWS support AAC, a codec used for Bluetooth audio. It supports 24-bit audio at 250kbps. Because it uses psychoacoustic modeling, it can provide better results than other codecs at a similar bit rate.
Since its the highest quality codec that any Bluetooth-supporting Apple product supports, the JBL Tune 225TWS will work fine with your iPad. If you are planning on using these with Android , ensure that they also support aptX HD, LDAC, or LHDC as well.
JBL Endurance Peak have 1 microphones.
JBL Tune 225TWS microphones are 4, more than that of JBL Endurance Peak by 3 . More microphones result in better sound quality and help the device to filter out noise.
JBL Tune 225TWS support fast charging. Commonly, technologies like MediaTek’s Pump Express, are used to reduce the time it takes to fully charge a device.
JBL Tune 225TWS have a mute function, they support the feature to mute/unmute a conversation directly from the earbuds.
With the JBL Endurance Peak, so you can access the volume control, pause, play, mute, etc whichever features are supported on the earbuds.
JBL Tune 225TWS too have a control panel on them.
The JBL Endurance Peak have a warranty period of 1 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use following instruction manuals.
The JBL Endurance Peak support voice prompts. Automatically receive information via audio messages, like if there is a problem with the connection.
JBL Tune 225TWS also support voice prompts meaning the earbuds notifies you if the battery is low, and you need to recharge the device.
JBL Endurance Peak come with their own special pouch. Carrying earphones without a case, or placing them in your pockets without a cover can easily put them at risk of getting damaged.
JBL Tune 225TWS also have a case included, which is useful for safe transportation.