Overall Score 5.3 Represents average audio ecosystem compatibility score.
Overall Score 5.1 Represents average audio ecosystem compatibility score.
IP ratings is the level of protection given by an enclosure, against dust and water. In the format of IPXX, 'X' represents a number The first value refers to protection against solids such as dust, while the second refers to protection against liquids (water).
Having a value of IPX7, the JBL Endurance Peak's rating for solids indicates that no data available to specify a protection rating, and the second value of 7 means that they are protected against temporary immersion in water under set conditions, say 1 metre for 30 minutes.
In comparison to the JBL Endurance Peak, Sony WF C500 have a rating of IPX4 meaning that
we are not yet certain of their rating with solids (dust)
and that of liquids is that,
Sony WF C500 has a lower liquid rating than JBL Endurance Peak
The JBL Endurance Peak have a weight of 30g . We prefer a lower weight better for the reason that lighter devices are more comfortable to transport.
Sony WF C500, at 10.8g
weigh less than the JBL Endurance Peak by -19.2g
For a device to be true wireless it must have no cables linking any part of the device together, JBL Endurance Peak are true wireless for this matter since they don't have cables. This is a key distinction since wireless earbuds have wires connecting the 2 earbuds together.
Sony WF C500 also is true wireless since it doesn't have cables linking the two earbuds .
JBL Endurance Peak have wingtips, these are commonly used for workout earbuds and come as an optional add-on to each silicone ear tip for a better fit.
JBL Endurance Peak have sweat resistance
Sony WF C500's resistance to sweat makes both devices good for use while doing sports such as long-distance running, marathons, cardio sweat workouts , etc
JBL Endurance Peak are both dustproof and water-resistant.
An earbud foam is made to be ultracompact and lightweight, with little interference with earrings, spectacles, hats, or hairstyles. The JBL Endurance Peak have an earbud foam for some people it is more comfortable than the in-ear foam.
JBL Endurance Peak have stereo speakers, devices with stereo speakers deliver sound from separate channels on both left and right sides, this creates a richer sound and a better listening experience.
Both Sony WF C500 and JBL Endurance Peak have stereo speakers
ANC utilises advanced technology to reduce ambient sounds. ANC works when, it detects and analyzes the sound pattern outside and inside the earbud and after inverts the soundwaves to cancel it out. Simply put, it's like taking +1 (sound from your surrounding) then producing -1 (counter sound by the device) to make 0 thus "diluting" the noise.
The JBL Endurance Peak have ANC allowing you to listen at lower levels of volume, causing less ear fatigue since you don't need to crank up the earbuds volume to overcome background noise.
The Sony WF C500 sit tightly in place, creating a sound seal that reduces your environment sounds well as preventing the earbuds music from leaking out .
JBL Endurance Peak have a unit size of 10mm in diameter, bigger drivers are more powerful, therefor producing better bass.
The driver unit is the component that produces sound in the earbuds, its size determines the sound made by the device.
Sony WF C500 driver unit is 5.8mm in diameter,
which implies that they have a smaller driver unit than that of JBL Endurance Peak by 4.2mm
, as many tend to believe that driver units of a bigger size automatically produce better sound quality.
However, large drivers usually have difficulty producing high frequencies so yeah, larger drivers are capable of generating louder sound, but this does not indicate that they deliver better quality sound.
JBL Endurance Peak's lowest frequency is at 16Hz, low-frequency response measures if and how well an audio device generates low frequencies that can be heard, and if it alters the signal on its way through.
Sony WF C500's lowest frequency is at 20Hz, this implies that
JBL Endurance Peak can make sound with a juicier bass than the Sony WF C500
JBL Endurance Peak's highest frequency is at 22000Hz, high-frequency response indicates how well a particular audio device produces high audible frequencies and if it changes to the signal on its way through.
Sony WF C500's highest frequency is at 20000Hz, this means that
JBL Endurance Peak can produce a clearer and crispier treble than the Sony WF C500
Sony WF C500 have neodymium magnets, when used in audio devices produce a higher sensitivity and substantial sound output while using less power. They can help generate music at quite a high sound pressure level, using high magnetic flux.
JBL Endurance Peak's battery life is 4 hours, a device's battery life is commonly given by the manufacturer, and with more battery hours, you get to use it for longer and requires fewer chanrgings.
Sony WF C500's battery life is
more than that of JBL Endurance Peak by 6 hours
. Each time you recharge your device, they get a little less listening time. The effect is not noticeable at first, but over a few years, your wireless earbuds will no longer play for long like they used to.
The battery life of the charging case is given by the manufacturer, and the JBL Endurance Peak's case has a charge of 24 hours. A charging case with a longer battery life allows you to recharge your earbuds on the go many times before having to recharge the case itself.
Sony WF C500's charging case has a battery life of 10 hours,
less than that of JBL Endurance Peak by 14 hours
It requires 2 hours to fully charge the JBL Endurance Peak's battery. It is highly adivsable to fully charge the battery before using the earbuds for the first time.
Sony WF C500 takes 2.5 hours to fully charge the battery,
more than that of JBL Endurance Peak by 0.5 hours
JBL Endurance Peak's battery power is 75mAh, battery capacity, shows the amount of electrical energy that a battery can keep.
The JBL Endurance Peak have a battery level indicator, an indicator notifies you when the device has a low battery. The battery indicator lights show the charging status of your earbuds and charging case.
Sony WF C500 too have a battery level indicator, charging indicators enable you tell the charging state of your device, whether fully charged, or the battery is running low.
Sony WF C500 support USB TYPE-C, a standard connector for transmitting both data and power in a single cable.
The JBL Endurance Peak have Bluetooth version of 4.2, Bluetooth is a wireless technology standard that enables data transfers between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves.
Sony WF C500 has a Bluetooth version of 5,
newer than that of JBL Endurance Peak
. Newer versions provide faster data transfers.
The JBL Endurance Peak have a 10meters distance to connect via Bluetooth.
Sony WF C500 have a maximum range of 9meters,
less than that of JBL Endurance Peak by 1meters
Sony WF C500 support AAC, a codec that is used for Bluetooth audio. It supports 24-bit audio at 250kbps. Because it uses psychoacoustic modeling, it provides better results than other codecs at a similar bit rate.
Being the highest quality codec that any Bluetooth-supporting Apple product supports, the Sony WF C500 will work well with your MacBook. If you intend on using these with Android you need to pay even closer attention to codec support for if they only have AAC they won't provide the best audio quality possible, ensure that they also support aptX HD, LDAC, or LHDC as well.
JBL Endurance Peak have 1 microphones.
Sony WF C500 microphones are 2,
more than that of JBL Endurance Peak by 1
. More microphones result in better sound quality and help the earbuds to filter out background sounds.
The Sony WF C500 support fast charging. Usually, technologies like MediaTek’s Pump Express, are used to lower the amount of time it takes to fully charge the earbuds.
Sony WF C500 have a mute function, they support the feature to mute/unmute a conversation directly from the device.
With the JBL Endurance Peak, so you can access the volume control, pause, play, mute, etc whichever features are supported on the earbuds.
The Sony WF C500 too have a control panel on them.
JBL Endurance Peak have a warranty period of 1 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use following instruction manuals.
If covered under the manufacturer’s warranty it is possible to get a replacement a malfunction occurs. Sony WF C500 have a warranty period of 1Years,
equal to that of the JBL Endurance Peak
.
The JBL Endurance Peak support voice prompts. With voice prompts, you receive information through audio messages, like if there is an issue with the connection.
The Sony WF C500 too have voice prompts .i.e the device will notify you if the battery is low, and you need to recharge them.
JBL Endurance Peak come with a special case. Carrying earphones openly, or placing them in your bag without a cover may easily put them at risk of getting damaged.
Sony WF C500 also have a case included, which is useful for safe transportation.