Has Active Noise Cancellation (Noise Control)
Beats Fit Pro
✓
JBL Tune 225TWS ✗
ANC makes use of more advanced technology to actively cancel noise. How it works, it studies the sound pattern of incoming noise and generates a mirror signal to counter it. In simple terms, it's like having +1 (sound from your surrounding) and adding -1 (inverted noise) giving 0 therefore "diluting" the noise.
The Beats Fit Pro have Active Noise Cancellation allowing you to listen at lower levels of volume, good for your ears as you don't need to crank up the device volume to outcompete background noise.
Has Passive Noise Reduction
Beats Fit Pro
✓
JBL Tune 225TWS ✓
JBL Tune 225TWS stay well in place, creating an acoustic covering that tones down your environment noise and also prevents the device voice audio from leaking out at the same.
Both Beats Fit Pro, and JBL Tune 225TWS have passive noise reduction this means that they limit ambient noise instead of actively using ANC to cancel it out.
Driver Unit Size
Beats Fit Pro
9.5mm
JBL Tune 225TWS 12mm
JBL Tune 225TWS driver unit is 12mm in diameter, bigger drivers are more powerful, therefor producing better bass.
A driver unit is basically a mini speaker that produces sound in the earbuds, the unit size corellates with the loudness of the device.
Beats Fit Pro driver unit is 9.5mm in diameter,
which implies that they have a smaller driver unit than that of JBL Tune 225TWS by 2.5mm
, many people have a misconception that driver units of a bigger size automatically produce better sound quality.
However, large drivers find it difficult to produce high frequencies so yes, larger drivers can generate louder sound, but this does not mean that they deliver better quality sound.
Lowest Frequency
Beats Fit Pro
20Hz
JBL Tune 225TWS 20Hz
The JBL Tune 225TWS's lowest frequency is at 20Hz, low-frequency response inidcates how well an audio device generates low audible frequencies and if it makes any changes to the signal on its way through.
Beats Fit Pro's lowest frequency is at 20Hz, this implies that
both devices make sound with equal bass
Highest Frequency
Beats Fit Pro
20000Hz
JBL Tune 225TWS 20000Hz
The JBL Tune 225TWS's highest frequency is at 20000Hz, high-frequency response tells how well an audio component generates high recognizable frequencies and if it makes any adjustments to the signal on its way through.
Beats Fit Pro's highest frequency is at 20000Hz, this means that
both devices produce equal treble
Sound Pressure Level
Beats Fit Pro
101.3dB/mW
JBL Tune 225TWS 105dB/mW
SPL, is the level of pressure of sound, measured in decibels, dB, JBL Tune 225TWS's measurement is 105dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
Beats Fit Pro's sound pressure level measurement is 101.3dB/mW. The sound pressure level, something is can be taken differently by different people, so we need to have a way of getting an objective measurement of sound level expressed in numerical terms.
Has A Neodymium Magnet
Beats Fit Pro
✓
JBL Tune 225TWS ✗
Beats Fit Pro have neodymium magnets, when used in audio devices produce a higher sensitivity and substantial sound output while using less power. They can help produce music at quite a high SPL, with the use of high magnetic flux.
A Review By Comparison Of The Technics Eah Az80 Vs. Jbl Tune 225Tws