JBL Tune 670NC have a weight of 174g, these weigh below 320g, which we consider as the highest average a headphone should weigh for comfort during long use. We consider a lower weight better because lighter devices are more comfortable to move with. The Anker Soundcore Life Q30, at 260g
weigh more than the JBL Tune 670NC with a difference 86g
Detachable cables are cables that have connectors on both ends.
One end goes into your headphone earpieces, while the other end is inserted into an audio source. Some new headphones, and not just the expensive ones, are coming with detachable cables, JBL Tune 670NC are one of those. With a detachable cable, Anker Soundcore Life Q30 too can use alternative cables and if the cable is pulled, it will pop out instead of breaking.
JBL Tune 670NC are foldable, which makes them more portable. Foldable headphones are easier to transport and take up less storage space. The Anker Soundcore Life Q30 too can fold up, foldable headphones can reduce their size by 60% to 70% when folded.
Twisted headphone cables can be a great source of annoyance and inconvenience, JBL Tune 670NC's cable is designed to minimize tangling. Constant twisting of the cables can also lead to microfractures in the copper wires, affecting sound quality, or
completely damaging your headphones. Anker Soundcore Life Q30 too have a cable designed to help prevent tangles.
A long cable ensures more freedom of movement, but remember that every cable based on the conducting material used has a certain amount of parasitic resistance, inductance, and capacitance. How much depends on the length and construction. JBL Tune 670NC comes with a 1.2meters cable.
Anker Soundcore Life Q30 comes with a 1.2meters cable. Almost any cable should be fine in sound quality If you're looking at lengths up to 2 - 3 meters. Over-ear headphones have larger earpads that fit around your entire ear JBL Tune 670NC have a comfortable full-size form with earcups that fully enclose your ears.
This design is loved for its increased sound isolation and the fact that it won't leak sound to your neighbors. Anker Soundcore Life Q30 with this design offer potential for maximum bass and loudness levels. JBL Tune 670NC have stereo speakers, devices with stereo speakers deliver sound from separate channels on both left and right sides, this creates a richer sound and a better listening experience.
The Anker Soundcore Life Q30 also have stereo speakers
Active noise cancellation uses more advanced technology to reduce unwanted ambient sounds. How it works, it listens to the sound pattern outside and inside the earbud and then generates a mirror signal to cancel it out. In simple terms, it's like taking +1 outside (noise from your surrounding) and adding -1 inside (counter sound within the device) to make zero resulting in a reduced level of noise.
JBL Tune 670NC allow you to listen at lower volume levels, causing less ear fatigue as you don't have to crank up the volume to overcome background noise. Anker Soundcore Life Q30 too have active noise cancellation making both devices ideal for plane rides and morning commutes. Each may work with different noise cancellation modes, pick the setting, mode, or noise cancellation type that you prefer for commute or that enhances your relaxation time.
Low-frequency response measures if and how well an audio component reproduces low audible frequencies and if it makes any changes to the signal while at it. JBL Tune 670NC's lowest frequency is at 20Hz, the lower the low-frequency response, the stronger and juicier the bass. Anker Soundcore Life Q30's lowest frequency is at 16Hz, this implies that
JBL Tune 670NC got a juicier bass than the Anker Soundcore Life Q30
High frequency response measures if and how well a particular audio device reproduces high audible frequencies and if it changes to the signal on the way through.
JBL Tune 670NC's highest frequency is at 20,000Hz, the higher the high-frequency response, the clearer and crispier the treble. Anker Soundcore Life Q30's highest frequency is at 40,000Hz, this means that
Anker Soundcore Life Q30 got a clearer and crispier treble than the JBL Tune 670NC
Sound pressure is the average variation in atmospheric pressure caused by the sound, the sound level .i.e how loud something is can be perceived differently by different people so we need to have a way of getting an objective measurement of sound level expressed in numerical terms.
The sound pressure level, SPL, is the pressure level of a sound, measured in decibels, dB, JBL Tune 670NC's measurement is 98dB/mW.
Devices with a higher sound pressure level are generally louder when supplied with any given audio source. Anker Soundcore Life Q30's sound pressure level measurement is 95dB/mW. The driver unit is the component that produces sound in the device, its size dictates the loudness of the headphone.
JBL Tune 670NC driver unit is 32mm in diameter, bigger drivers are more powerful and can produce better bass. Anker Soundcore Life Q30 driver unit is 40mm in diameter,
making them have a larger driver unit than that of JBL Tune 670NC by 8mm
, as many tend to believe that driver units of a bigger size automatically produce better sound quality.
However, large drivers usually have difficulty reproducing high frequencies so yeah, larger drivers can generate louder sound, but this does not mean that they deliver better sound.
Defined as the device's resistance to the electromagnetic current, when electricity flows through a conductor, it faces electrical resistance that counters the flow of current. The resistance of a conductor is measured in ohms. JBL Tune 670NC's impedance is 32Ohms, the lower the impedance, the easier it is to get higher volume and requires less power.
Anker Soundcore Life Q30's impedance is 16Ohms. The impedance of earbuds is the electrical resistance of the driver unit present on the inside. If your headphones play wirelessly, cancel ambient noise, or enhance your listening experience with active features, their battery life will reduce over time.
The device's battery life is given by the manufacturer, with longer battery life, you get to use it for longer and have to charge the device less often. JBL Tune 670NC's battery life is 70 hours
Anker Soundcore Life Q30's battery life is 60 hours. Each time you recharge your headphones, they get a little less listening time.
The effect is barely noticeable at first. But over a few years, you may find that your device, no longer plays for long like it used to. It takes 2 hours to fully charge the JBL Tune 670NC's battery.
It is recommended to fully charge the battery before using the headphones for the first time or when they have been unused for extended periods. Anker Soundcore Life Q30 takes 2 hours to fully charge the battery
JBL Tune 670NC have a battery level indicator, an indicator shows you when the device has a low battery. The battery indicator lights indicate the charging status of your headphones.
Anker Soundcore Life Q30 too have a battery level indicator, charging indicators allow you to determine the charging state of your headphones, whether fully charged, or the battery is running low. Battery power, or battery capacity, represents the amount of electrical energy that a battery can store. JBL Tune 670NC's battery power is 690mAh, more battery power can be an indication of longer battery life.
Anker Soundcore Life Q30's battery power is 720mAh. A rechargeable battery is a type of electrical battery that can be charged, discharged into a load, and recharged many times, as opposed to a disposable or primary battery, which is supplied fully charged and discarded after use. JBL Tune 670NC's battery can be recharged and used over again.
The Anker Soundcore Life Q30 too have a rechargeable battery. JBL Tune 670NC can be used wirelessly, wireless devices allow you more freedom of movement. The Anker Soundcore Life Q30 also can be used wirelessly
2.4GHz wireless is used for devices such as headsets such as the JBL Tune 670NC, keyboards, and mice similar to Bluetooth but with a proprietary radio frequency.
It typically offers better performance than Bluetooth, with low latency and good stability. Bluetooth is a wireless technology standard that allows data transfers between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves. JBL Tune 670NC has a v5.3
Anker Soundcore Life Q30 has a Bluetooth version of v5.
Newer versions provide faster data transfers. JBL Tune 670NC support USB TYPE-C, an industry-standard connector for transmitting both data and power on a single cable. The USB-C plug is now part and parcel of most current laptops, phones, and tablets, it features reversible plug orientation and cable direction.
Anker Soundcore Life Q30 too have USB TYPE-C
JBL Tune 670NC support AAC, a codec that is used for Bluetooth audio. It supports 24-bit audio at 250kbps. Because it uses psychoacoustic modeling, it can provide better results than other codecs at a similar bit rate.
The Anker Soundcore Life Q30 support AAC as well. Designed to be the successor of the MP3 format, AAC generally achieves higher sound quality than MP3 encoders at the same bit rate. Bluetooth is a short-range wireless technology standard that is used for exchanging data between fixed and mobile devices over short distances.
The JBL Tune 670NC can connect at a 10meters distance via Bluetooth or infrared to another device. The Anker Soundcore Life Q30 can connect at a 15meters distance via Bluetooth
Being an industry standard audio plug, a standard 3.5mm male connector is suitable for use with all MP3 players and computer sound cards. This means that it is commonly used in stereo headphones to your phone or connecting your phone to an external amplifier, sound bars, your car radio, etc.
JBL Tune 670NC has this connector giving it a wider range of connectivity with most of the sound devices out there. All plugs have at least a tip and sleeve with the number of rings that stand as a differentiating factor. Anker Soundcore Life Q30 too have this kind of connector
JBL Tune 670NC have only 1 microphones, more microphones result in better sound quality and enable the device to filter out background noise.
The Anker Soundcore Life Q30 microphones are only 2. JBL Tune 670NC use a noise-canceling type of microphone, these microphones are designed to filter out background noise from the desired sound. Especially useful in noisy environments.
The Anker Soundcore Life Q30 too use a noise-canceling type of microphone. JBL Tune 670NC support ambient sound mode, which uses microphones to pass through ambient noises so that they can still be heard. It’s useful when you want to listen to music but also be aware of what’s happening around you, for example when you’re having a jog but would still want to be able to hear traffic.
The Anker Soundcore Life Q30 support ambient sound mode as well allowing you to hear the ambient sound even while wearing them. JBL Tune 670NC support multipoint, which allows you to link to more Bluetooth devices and switch between them. For example, you can easily switch calls from one device to another without having to manually disconnect and reconnect.
The Anker Soundcore Life Q30 support multipoint count. Bluetooth multipoint would come in handy because you can be on one call without missing notifications coming from another device. There is a control panel on the JBL Tune 670NC body, so you can easily access the volume control or remote without having to interact with a cable or another device it's connected to.
The Anker Soundcore Life Q30 too have a control panel on them. JBL Tune 670NC can be used as a headset. A headset is one headphone or pair with a built-in microphone.
Headsets can be used for apps that require communication i.e. Zoom, Google Meet, Skype, games with voice chat, mobile phones, etc. Anker Soundcore Life Q30 can be used as a headset.
since they have a built-in microphone
Carrying headphones without a case, or putting them in bags without a casing can easily put them at risk of getting damaged. The JBL Tune 670NC come with their own special case or pouch, which is useful for safe transportation. Anker Soundcore Life Q30 too have a travel bag or case included.
