Ingress protection ratings is the rating of protection given by an enclosure, against solids and liquids. The letters 'IP' are followed by two values The first value of the IP rating refers to protection against solids say dust, followed by the one that refers to protection against liquids (water).
Scoring IP44, the JLab Go Air's rating for solids indicates that they are protected against objects greater than 1.0mm such as wire, and the second value of 4 means that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes. The JLab Go Air have a weight of 10g . We prefer a lower weight better for the reason that lighter devices are easier to carry.
For a device to be true wireless it should have no cables linking any part of the device together, JLab Go Air are true wireless for this matter since they have no cables. This is a major difference as some wireless earbuds have wires connecting the two earbuds together. JLab Go Air have sweat resistance
JLab Go Air have stereo speakers, devices with stereo speakers deliver sound from independent channels on both left and right sides, creating a richer sound and a better listening experience.
JLab Go Air sit tightly in place, this creates an acoustic seal that reduces your environment noise and also prevents the earbuds sound from leaking out .
JLab Go Air have a unit size of 8mm in diameter, the bigger the unit the more powerful, therefor producing better bass. A driver unit is basically a mini speaker that makes sound in the device, the unit size corellates with the loudness of the device. The JLab Go Air's lowest frequency is at 20Hz, low-frequency response measures if and how well an audio device produces low audible frequencies and if it alters the signal while at it.
The JLab Go Air's highest frequency is at 20,000Hz, high-frequency response tells how well an audio device makes high audible frequencies and if it changes to the signal on its way through. SPL, is the level of pressure of sound, in decibels, dB, JLab Go Air's measurement is 103dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
The JLab Go Air's battery life is 5 hours, these last less than 5 hours of listening which is considered average before recharge. A device's battery life is usually given by the manufacturer, and with longer battery life, you get to use it for longer and requires fewer chargings. This is given by the vendor, and JLab Go Air's case has a full charge of 15 hours.
A charging case with more battery hours allows you to recharge your earbuds on the go multiple times before recharging the case itself. It takes 1.5 hours to fully charge the JLab Go Air's battery. It is highly adivsable to charge fully the battery before using the earbuds when they have been unused for long periods.
JLab Go Air have a battery level indicator, an indicator alerts you when the earbuds has a low battery. Its lights indicate the charging status of your device and charging case. JLab Go Air have Bluetooth version of 5, Bluetooth is a wireless technology standard that allows data movement between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves.
The JLab Go Air have a 10meters distance connecting via Bluetooth. JLab Go Air have 2 microphones. JLab Go Air microphone sensitivity is measured at -38dBV/Pa.
The vastness of the analog or digital output signal from the microphone with its input stimulus is a calculation of its sensitivity. It's the 'loudness' of the sound that the microphone can recognize. The JLab Go Air, so you can easily access the volume control, pause, play, mute, etc whichever functions are supported on the device.
The JLab Go Air have a warranty period of 2 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use that has followed instruction manuals. JLab Go Air support voice prompts. With voice prompts, you receive information through audio messages, like if there is a problem with the connection.
