JLab Go Air
See price on AmazonOverall Score 4.9 Represents average audio ecosystem compatibility score.
Ingress protection ratings is the level of protection offered by a casing, against solids and liquids. In the format of IPXX, 'X' represents a number The first value represents protection against solids such as dust, followed by the one that refers to resistance against liquids (water).
Scoring IP44, the JLab Go Air's rating for solids indicates that they are protected against objects greater than 1.0mm such as wire, and the second value of 4 means that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes.
JLab Go Air have a weight of 10g . We consider a lower weight best for the reason that lighter devices are more comfortable to move with.
True wireless devices have no wires linking any part of the device together, JLab Go Air are true wireless for this matter since they don't have cables. This is a key distinction as some wireless earbuds have cables connecting the two earbuds together.
JLab Go Air have sweat resistance
JLab Go Air have stereo speakers, devices with stereo speakers deliver sound from separate channels on both left and right sides, creating a richer sound and a better listening experience.
JLab Go Air stay well in place, creating a sound seal that reduces background sounds and also prevents the earbuds sound from leaking out at the same.
JLab Go Air driver unit is 8mm in diameter, the bigger the unit the more powerful, and can produce better bass. A driver unit is the component that makes sound in the device, its size determines the loudness of the earbuds.
The JLab Go Air's lowest frequency is at 20Hz, low-frequency response measures if and how well an audio device generates low audible frequencies and if it makes any changes to the signal on its way through.
The JLab Go Air's highest frequency is at 20,000Hz, high-frequency response indicates how well an audio device produces high audible frequencies and if it changes to the signal on its way through.
The sound pressure level, is the level of pressure of sound, measured in decibels, dB, JLab Go Air's measurement is 103dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
The JLab Go Air have neodymium magnets, when used in earbuds produce a higher sensitivity and substantial sound output using less power to do so. They can help generate music at quite a high sound pressure level, using high magnetic flux.
The JLab Go Air's battery life is 5 hours, these last less than 5 hours of listening which is considered average for a single charge. A device's battery life is commonly given by the manufacturer, and with more battery hours, you get to use it for longer and have to charge the device less often.
This is given by the manufacturer, and the JLab Go Air's case is said to have a charge of 15 hours. A charging case with more battery hours allows you to recharge your earbuds on the go many times before recharging the case itself.
It requires 1.5 hours to fully charge the JLab Go Air's battery. It is highly adivsable to fully charge the battery before using the earbuds when they have been in storage for long periods.
JLab Go Air's battery power is 43mAh, battery capacity, shows the amount of electrical energy that a battery can store.
The JLab Go Air have a battery level indicator, an indicator alerts you when the device has a low battery. The battery indicator lights indicate the charging state of your device and charging case.
The JLab Go Air have Bluetooth version of 5, Bluetooth is a wireless technology standard that allows data movement between devices placed in range, using short-wavelength, ultra-high frequency radio waves.
JLab Go Air have a 10meters distance connecting via Bluetooth.
JLab Go Air have 2 microphones.
JLab Go Air microphone sensitivity is measured at -38dBV/Pa. The amount of the analog or digital output signal from the microphone with its input stimulus is a measure of its sensitivity. It's the 'loudness' of the sound that the earbud microphone can recognize.
The JLab Go Air, so you can access the volume control, pause, play, mute, etc whichever functions are supported on the device.
The JLab Go Air have a warranty period of 2 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use that has followed instruction manuals.
JLab Go Air support voice prompts. With voice prompts, you receive information through audio messages, say if there is an issue with the connection.