Jlab Go Air Vs. Beats Studio Buds Review In Detail

Ingress Protection (Ip) Rating

Beats Studio Buds IPX4

JLab Go Air IP44

IP ratings is the rank of protection given by a casing, against dust and water. The letters 'IP' are followed by two values The first value of the IP rating represents protection against solids say dust, followed by the one that refers to protection against liquids (sweat).

Having a value of IP44, the JLab Go Air's rating is read as, the first number of 4 denotes that they are protected against objects greater than 1.0mm such as wire, and of liquids that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes.

Compared to the JLab Go Air, Beats Studio Buds have a rating of IPX4 meaning that no data available to specify a protection rating and that of liquids is that, they both have the same rating against liquids

Weight

Beats Studio Buds 5.1g

JLab Go Air 10g

The JLab Go Air have a weight of 10g . We take in account a lower weight better for the reason that lighter devices are easier to carry.

Beats Studio Buds, at 5.1g are lighter than the JLab Go Air by -4.9g

Has No Wires Or Cables

Beats Studio Buds ✓

JLab Go Air ✓

True wireless devices have no wires linking any part of the device together, JLab Go Air are true wireless for this matter since they have no wires. This is an important distinction since wireless earbuds have wires linking the 2 earbuds together.

Beats Studio Buds also is true wireless because it doesn't have wires connecting the 2 earbuds .

Sweat Resistance

Beats Studio Buds ✓

JLab Go Air ✓

JLab Go Air are resistant to sweat

Beats Studio Buds's resistance to sweat makes both devices fit for use while doing sports such as long-distance running, marathons, cardio sweat workouts , etc

Has Stereo Speakers

Beats Studio Buds ✓

JLab Go Air ✓

JLab Go Air have stereo speakers, devices with stereo speakers deliver sound from separate channels on both left and right sides, creating a richer sound and a better listening experience.

Both Beats Studio Buds and JLab Go Air have stereo speakers

Has Active Noise Cancellation (Noise Control)

Beats Studio Buds ✓

JLab Go Air ✗

Active noise cancellation utilises more advanced technology to reduce unwanted ambient sounds. How it works, it studies the sound pattern outside and inside the earbud and generates a mirror signal to counter it. Simply put, it's like taking +1 (noise) then producing -1 (counter sound by the device) giving 0 therefore "diluting" the noise.

Beats Studio Buds have Active Noise Cancellation enabling you to listen at lower levels of volume, good for your ears as you don't have to crank up the device volume to overcome background sounds.

Has Passive Noise Reduction

Beats Studio Buds ✓

JLab Go Air ✓

JLab Go Air sit tightly in place, creating a sound covering that reduces background noise well as preventing the earbuds sound from leaking out .

Both Beats Studio Buds, and JLab Go Air have passive noise reduction this means that they reduce ambient noise without using ANC to cancel it out.

Driver Unit Size

Beats Studio Buds 8.2mm

JLab Go Air 8mm

JLab Go Air driver unit is 8mm in diameter, bigger drivers are more powerful, and can produce better bass. The driver unit is basically a mini speaker that produces sound in the device, its size dictates the sound produced by the device.

Beats Studio Buds driver unit is 8.2mm in diameter, making them have a larger driver unit than that of JLab Go Air by 0.2mm , many people have a misconception that driver units of a bigger size automatically produce better sound quality.

However, large drivers usually have difficulty producing high frequencies so it's true that, larger drivers are capable of generating louder sound, but this does not imply that they produce better quality sound.

Lowest Frequency

Beats Studio Buds 20Hz

JLab Go Air 20Hz

JLab Go Air's lowest frequency is at 20Hz, low-frequency response inidcates how well an audio component produces low frequencies that can be heard, and if it alters the signal while at it.

Beats Studio Buds's lowest frequency is at 20Hz, this means that both devices can make sound with equal bass

Highest Frequency

Beats Studio Buds 20,000Hz

JLab Go Air 20,000Hz

JLab Go Air's highest frequency is at 20,000Hz, high-frequency response indicates how well a particular audio device produces high recognizable frequencies and if it makes any changes to the signal on its way through.

Beats Studio Buds's highest frequency is at 20,000Hz, this means that both devices produce equal treble

Sound Pressure Level

Beats Studio Buds 100.5dB/mW

JLab Go Air 103dB/mW

The sound pressure level, is the level of pressure of sound, in decibels, dB, JLab Go Air's measurement is 103dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.

Beats Studio Buds's sound pressure level measurement is 100.5dB/mW. The sound pressure level, something is can be considered differently by different persons, so we need to have the means to get a standard measurement of sound level expressed in numerical terms.

Jbl Endurance Peak 3 Vs. Jlab Go Air Review

Battery Life

Beats Studio Buds 8hours

JLab Go Air 5hours

JLab Go Air's battery life is 5 hours, these last less than 5 hours of listening which is considered average for a single charge. A device's battery life is commonly given by the manufacturer, and with longer battery life, you get to use it for longer and requires fewer chargings.

Beats Studio Buds's battery life is more than that of JLab Go Air by 3 hours . Each time you recharge your device, they get a little less listening time. The effect is barely noticeable at first, but over a few years, your wireless earbuds will no longer play for long like they used to.

Battery Life Of Charging Case

Beats Studio Buds 16hours

JLab Go Air 15hours

This is given by the vendor, and the JLab Go Air's case has a charge of 15 hours. A charging case with a longer battery life enables you to recharge your earbuds on the go many times before having to recharge the case itself.

Beats Studio Buds's charging case has a battery life of 16 hours, more than that of JLab Go Air by 1 hours

Charge Time

Beats Studio Buds 1.5hours

JLab Go Air 1.5hours

It takes 1.5 hours to fully charge the JLab Go Air's battery. It is recommended to fully charge the battery before using the earbuds when they have been unused for long periods.

Beats Studio Buds takes 1.5 hours to fully charge the battery, equal to that of the JLab Go Air

Has A Battery Level Indicator

Beats Studio Buds ✓

JLab Go Air ✓

The JLab Go Air have a battery level indicator, an indicator alerts you when the device has a low battery. Its lights show the charging status of your earbuds and case.

Beats Studio Buds too have a battery level indicator, charging indicators allow you to tell the charging state of your device, whether fully charged, or the battery is running low.

Has Usb Type-C

Beats Studio Buds ✓

JLab Go Air ✗

The Beats Studio Buds have USB TYPE-C, an industry-standard connector for transmitting both data and power through a single cable.

Bluetooth Version

Beats Studio Buds v5.2

JLab Go Air v5

JLab Go Air have Bluetooth version of 5, Bluetooth is a wireless technology standard that enables data movement between devices placed in range, using short-wavelength, ultra-high frequency radio waves.

Beats Studio Buds has a Bluetooth version of 5.2, newer than that of JLab Go Air . Newer versions provide faster data transfers.

Maximum Bluetooth Range

Beats Studio Buds 10meters

JLab Go Air 10meters

The JLab Go Air have a 10meters distance connecting via Bluetooth.

Beats Studio Buds have a maximum range of 10meters, equal to that of the JLab Go Air

Has Aac

Beats Studio Buds ✓

Beats Studio Buds ✓

JLab Go Air ✗

The Beats Studio Buds come with their own special case. Carrying earphones without a case, or placing them in your bag without a casing may easily damage them.

Sennheiser Momentum True Wireless 4 Vs. Jlab Go Air Review

Category	Features	Beats Studio Buds	JLab Go Air
DESIGN	ingress protection (ip) rating	IPX4	IP44
	weight	5.1g	10g
	has no wires or cables	✓	✓
	sweat resistance	✓	✓
	has stereo speakers	✓	✓
SOUND QUALITY	has active noise cancellation (noise control)	✓	✗
	has passive noise reduction	✓	✓
	driver unit size	8.2mm	8mm
	lowest frequency	20Hz	20Hz
	highest frequency	20,000Hz	20,000Hz
	sound pressure level	100.5dB/mW	103dB/mW
POWER	battery life	8hours	5hours
	battery life of charging case	16hours	15hours
	charge time	1.5hours	1.5hours
	has a battery level indicator	✓	✓
CONNECTIVITY	has usb type-c	✓	✗
	bluetooth version	v5.2	v5
	maximum bluetooth range	10meters	10meters
	has aac	✓	✗
MICROPHONE	number of microphones	6only	2only
	has a noise-canceling microphone	✓	✗
	mic sensitivity	✗	-38dBV/Pa
EXTRAS	has ambient sound mode	✓	✗
	has find earbuds feature	✓	✗
	supports fast charging	✓	✗
	multipoint count	2only	✗
	has a mute function	✓	✗
	control panel placed on a device	✓	✓
	warranty period	✗	2Years
	has voice prompts	✓	✓
	travel bag is included	✓	✗
		See price on Amazon	See price on Amazon

Jlab Go Air Vs. Beats Studio Buds Review

Reasons why you might like the Beats Studio Buds

Reasons why you might like the JLab Go Air

Related Reviews

Jlab Go Air Vs. Beats Studio Buds Review In Summary

Jlab Go Air Vs. Beats Studio Buds Review In Detail

Design

Ingress Protection (Ip) Rating

Weight

Has No Wires Or Cables

Sweat Resistance

Has Stereo Speakers

Sound Quality

Has Active Noise Cancellation (Noise Control)

Has Passive Noise Reduction

Driver Unit Size

Lowest Frequency

Highest Frequency

Sound Pressure Level

Power

Battery Life

Battery Life Of Charging Case

Charge Time

Has A Battery Level Indicator

Connectivity

Has Usb Type-C

Bluetooth Version

Maximum Bluetooth Range

Has Aac

Microphone

Number Of Microphones

Has A Noise-Canceling Microphone

Mic Sensitivity

Extras

Has Ambient Sound Mode

Has Find Earbuds Feature

Supports Fast Charging

Multipoint Count

Has A Mute Function

Control Panel Placed On A Device

Warranty Period

Has Voice Prompts

Travel Bag Is Included