JLab Go Air
See price on AmazonOverall Score 4.9 Represents average audio ecosystem compatibility score.
IP ratings refer to the rating of protection given by a casing, against dust and water. In the format of IPXX, 'X' represents a number The first value refers to protection against solids such as dust, followed by the one that refers to resistance against liquids (water).
Scoring IP44, the JLab Go Air's rating is read as, the first number of 4 denotes that they are protected against objects greater than 1.0mm such as wire, and the second number of 4 means that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes.
JLab Go Air have a weight of 10g . We take in account a lower weight best for the reason that lighter devices are easier to move with.
True wireless devices have no cables linking any part of the device together, JLab Go Air are true wireless for this matter since they have no cables. This is an important difference as some wireless earbuds have wires connecting the 2 earbuds together.
JLab Go Air have sweat resistance
JLab Go Air have stereo speakers, what this means is that JLab Go Air's speakers deliver sound from separate channels on both left and right sides, creating a richer sound and a better listening experience.
The JLab Go Air sit tightly in place, this creates an acoustic seal that reduces your environment sounds and also prevents the earbuds sound from leaking out .
The JLab Go Air have a unit size of 8mm in diameter, bigger drivers are more powerful, therefor producing better bass. A driver unit is the component that makes sound in the earbuds, its size corellates with the sound produced by the device.
The JLab Go Air's lowest frequency is at 20Hz, low-frequency response inidcates how well a particular audio device produces low frequencies that can be heard, and if it makes any changes to the signal while at it.
JLab Go Air's highest frequency is at 20,000Hz, high-frequency response measures if and how well an audio device generates high recognizable frequencies and if it changes to the signal while at it.
The sound pressure level, is the level of pressure of sound, in decibels, dB, JLab Go Air's measurement is 103dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
JLab Go Air have neodymium magnets, when used in earbuds produce a higher sensitivity and substantial sound output using less power to do so. They can help produce music at quite a high sound pressure level, with the use of high magnetic flux.
JLab Go Air's battery life is 5 hours, these last less than 5 hours of listening which is considered average before recharge. A device's battery life is usually given by the manufacturer, and with longer battery life, you get to use it for longer and have to charge the device less often.
The battery life of the charging case is given by the vendor, and the JLab Go Air's case is said to have a charge of 15 hours. A charging case with more battery hours enables you to recharge your earbuds on the go several times before having to recharge the case itself.
It takes 1.5 hours to fully charge the JLab Go Air's battery. It is recommended to charge fully the battery before using the earbuds when they have been in storage for long periods.
JLab Go Air's battery power is 43mAh, battery capacity, shows the amount of electrical energy that a battery can store.
The JLab Go Air have a battery level indicator, an indicator alerts you when the earbuds has a low battery. The battery indicator lights indicate the charging status of your device and charging case.
The JLab Go Air have Bluetooth version of 5, Bluetooth is a wireless technology standard that allows data transfers between devices placed in range, using short-wavelength, ultra-high frequency radio waves.
JLab Go Air have a 10meters distance connecting via Bluetooth.
The JLab Go Air have 2 microphones.
The JLab Go Air microphone sensitivity is measured at -38dBV/Pa. The size of the analog or digital output signal from the microphone with its input stimulus is a calculation of its sensitivity. It's the 'loudness' of the sound that the microphone can recognize.
The JLab Go Air, so you can easily access the volume control, pause, play, mute, etc whichever functions are supported on the device.
JLab Go Air have a warranty period of 2 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use following instruction manuals.
The JLab Go Air have voice prompts. Automatically receive information through audio messages, say if there is a problem with the connection.