JLab Go Air
See price on AmazonOverall Score 4.9 Represents average audio ecosystem compatibility score.
Ingress protection ratings refer to the rating of protection given by an enclosure, against dust and liquids. The letters 'IP' are followed by two values The first value of the IP rating refers to protection against solids say dust, while the second refers to protection against liquids (sweat).
Having a value of IP44, the JLab Go Air's rating is read as, the first value of 4 denotes that they are protected against objects greater than 1.0mm such as wire, and of liquids that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes.
The JLab Go Air have a weight of 10g . We take in account a lower weight best for the reason that lighter devices are easier to move with.
True wireless devices have no wires linking any part of the device together, JLab Go Air are true wireless for this case since they have no cables. This is a major distinction as some wireless earbuds have cables connecting the 2 earbuds together.
JLab Go Air are resistant to sweat
JLab Go Air have stereo speakers, what this means is that JLab Go Air's speakers deliver sound from independent channels on both left and right sides, this creates a richer sound and a better listening experience.
The JLab Go Air stay well in place, this creates an acoustic covering that tones down background noise while preventing the device voice audio from leaking out at the same.
The JLab Go Air driver unit is 8mm in diameter, bigger drivers are more powerful, therefor producing better bass. The driver unit is basically a mini speaker that makes sound in the device, its size dictates the sound produced by the earbuds.
JLab Go Air's lowest frequency is at 20Hz, low-frequency response inidcates how well a particular audio component generates low frequencies that can be heard, and if it makes any changes to the signal while at it.
JLab Go Air's highest frequency is at 20,000Hz, high-frequency response measures if and how well an audio component generates high audible frequencies and if it makes any changes to the signal on its way through.
SPL, is the level of pressure of sound, in decibels, dB, JLab Go Air's measurement is 103dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
The JLab Go Air have neodymium magnets, when used in earbuds produce a higher sensitivity and substantial sound output while using less power. They can help produce music at quite a high sound pressure level, using high magnetic flux.
The JLab Go Air's battery life is 5 hours, these last less than 5 hours of listening which is considered average before recharge. A device's battery life is usually given by the manufacturer, and with more battery hours, you get to use it for longer and requires fewer chargings.
The battery life of the charging case is given by the vendor, and JLab Go Air's case is said to have a charge of 15 hours. A charging case with more battery hours enables you to recharge your earbuds on the go many times before recharging the case itself.
It takes 1.5 hours to fully charge the JLab Go Air's battery. It is highly adivsable to fully charge the battery before using the earbuds when they have been unused for long periods.
JLab Go Air's battery capacity is 43mAh, battery capacity, represents the amount of electrical energy that a battery can store.
JLab Go Air have a battery level indicator, an indicator shows you when the device has a low battery. Its lights show the charging state of your device and case.
JLab Go Air have Bluetooth version of 5, Bluetooth is a wireless technology standard that enables data transfers between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves.
The JLab Go Air have a 10meters distance to connect via Bluetooth.
The JLab Go Air have 2 microphones.
JLab Go Air microphone sensitivity is measured at -38dBV/Pa. The extent of the analog or digital output signal from the microphone with its input stimulus is a calculation of its sensitivity. It's the 'loudness' of the voice that the microphone can pick up.
The JLab Go Air, so you can easily access the volume control, pause, play, mute, etc whichever functions are supported on the earbuds.
JLab Go Air have a warranty period of 2 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use that has followed instruction manuals.
JLab Go Air support voice prompts. Automatically receive information through audio messages, say if there is a problem with the connection.