JLab Go Air
See price on AmazonOverall Score 5.3 Represents average audio ecosystem compatibility score.
IP ratings is the rank of protection offered by a casing, against dust and water. The letters 'IP' are followed by two values The first value of the IP rating means protection against solids such as dust, followed by the one that refers to resistance against liquids (sweat).
Having a value of IP44, the JLab Go Air's rating for solids indicates that they are protected against objects greater than 1.0mm such as wire, and the second value of 4 means that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes.
The JLab Go Air have a weight of 10g . We take in account a lower weight better because lighter devices are easier to carry.
For a device to be true wireless it must have no wires connecting any part of the device together, JLab Go Air are true wireless for this case since they don't have cables. This is a major distinction since wireless earbuds have cables connecting the two earbuds together.
JLab Go Air are resistant to sweat
JLab Go Air have stereo speakers, devices with stereo speakers deliver sound from separate channels on both left and right sides, this creates a richer sound and a better listening experience.
JLab Go Air stay tightly in place, creating a sound covering that reduces your environment sounds and also prevents the device voice audio from leaking out at the same.
The JLab Go Air have a unit size of 8mm in diameter, bigger drivers are more powerful, and can produce better bass. A driver unit is the component that makes sound in the earbuds, its size corellates with the loudness of the device.
The JLab Go Air's lowest frequency is at 20Hz, low-frequency response inidcates how well an audio device generates low frequencies that can be heard, and if it makes any changes to the signal on its way through.
The JLab Go Air's highest frequency is at 20,000Hz, high-frequency response tells how well an audio device produces high human frequencies and if it changes to the signal while at it.
The sound pressure level, is the level of pressure of sound, measured in decibels, dB, JLab Go Air's measurement is 103dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
The JLab Go Air's battery life is 5 hours, these last less than 5 hours of listening which is considered average for a single charge. A device's battery life is given by the manufacturer, and with longer battery life, you get to use it for longer and requires fewer chargings.
The battery life of the charging case is given by the manufacturer, and the JLab Go Air's case is said to have a charge of 15 hours. A charging case with more battery hours enables you to recharge your earbuds on the go many times before recharging the case itself.
It takes 1.5 hours to fully charge the JLab Go Air's battery. It is recommended to charge fully the battery before using the earbuds for the first time.
JLab Go Air have a battery level indicator, an indicator notifies you when the device has a low battery. Its lights indicate the charging status of your device and charging case.
JLab Go Air have Bluetooth version of 5, Bluetooth is a wireless technology standard that allows data transfers between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves.
The JLab Go Air have a 10meters distance connecting via Bluetooth.
JLab Go Air have 2 microphones.
The JLab Go Air microphone sensitivity is measured at -38dBV/Pa. The extent of the analog or digital output signal from the microphone with its input stimulus is a measure of its sensitivity. It's the 'loudness' of the voice that the earbud microphone can recognize.
The JLab Go Air, so you can access the volume control, pause, play, mute, etc whichever features are supported on the device.
JLab Go Air have a warranty period of 2 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use following instruction manuals.
The JLab Go Air support voice prompts. With voice prompts, you receive information via audio messages, like if there is a problem with the connection.