Overall Score 5.1 Represents average audio ecosystem compatibility score.
Overall Score 4.9 Represents average audio ecosystem compatibility score.
Ingress protection ratings is the rating of protection offered by a casing, against solids and liquids. The letters 'IP' are followed by two values The first value means protection against solids such as dust, followed by the one that refers to resistance against liquids (water).
Scoring IP44, the JLab Go Air's rating for solids indicates that they are protected against objects greater than 1.0mm such as wire, and the second number of 4 means that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes.
Compared to the JLab Go Air, Tozo T10S have a rating of IPX8 meaning that
no data available to specify a protection rating
and that of liquids is that,
Tozo T10S has a higher liquid rating than JLab Go Air
The JLab Go Air have a weight of 10g . We prefer a lower weight best because lighter devices are more comfortable to move with.
The Tozo T10S, at 10g
have the same weight as the JLab Go Air
True wireless devices have no cables linking any part of the device together, JLab Go Air are true wireless for this matter since they don't have wires. This is an important distinction as some wireless earbuds have wires linking the two earbuds together.
Tozo T10S also is true wireless since it has no cables linking the pair of earbuds .
JLab Go Air have sweat resistance
Tozo T10S's resistance to sweat makes both devices fit for use during long-distance running, marathons, cardio sweat workouts , etc
JLab Go Air have stereo speakers, devices with stereo speakers deliver sound from independent channels on both left and right sides, this creates a richer sound and a better listening experience.
The Tozo T10S also have stereo speakers
Tozo T10S are rated 1meters any depth more than that you are likely to lose the functionality of your device. Devices that have a higher depth rating are better for swimming.
The JLab Go Air sit tightly in place, this creates an acoustic covering that reduces your environment sounds and also prevents the earbuds voice audio from leaking out .
Both of these devices have passive noise reduction this implies that they reduce ambient noise instead of actively using technology to cancel it out.
JLab Go Air have a unit size of 8mm in diameter, the bigger the unit the more powerful, therefor producing better bass.
The driver unit is the component that makes sound in the device, the unit size determines the sound made by the earbuds.
Tozo T10S driver unit is 8mm in diameter,
making both Tozo T10S, and JLab Go Air similar in how loud their sound gets
, a common assumption that driver units of a bigger size automatically produce better sound quality.
However, large drivers find it difficult to produce high frequencies so yeah, larger drivers can generate louder sound, but this does not indicate that they produce better quality sound.
The JLab Go Air's lowest frequency is at 20Hz, low-frequency response inidcates how well an audio device generates low audible frequencies and if it makes any changes to the signal on its way through.
Tozo T10S's lowest frequency is at 20Hz, this implies that
both devices make sound with equal bass
The JLab Go Air's highest frequency is at 20000Hz, high-frequency response shows how well an audio device makes high human frequencies and if it changes to the signal on its way through.
Tozo T10S's highest frequency is at 20000Hz, this implies that
both devices can produce equal treble
SPL, is the level of pressure of sound, in decibels, dB, JLab Go Air's measurement is 103dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
JLab Go Air have neodymium magnets, when used in earbuds produce a higher sensitivity and substantial sound output while using less power. They can help produce music at quite a high SPL, using high magnetic flux.
JLab Go Air's battery life is 5 hours, a device's battery life is usually given by the manufacturer, and with longer battery life, you get to use it for longer and requires fewer chanrgings.
Tozo T10S's battery life is
more than that of JLab Go Air by 3 hours
. Every time you recharge your device, they get a little less listening time. The effect is not noticeable at first, but over time, your wireless earbuds will no longer play for long like they used to.
The battery life of the charging case is given by the manufacturer, and JLab Go Air's case has a full charge of 15 hours. A charging case with a longer battery life allows you to recharge your earbuds on the go many times before recharging the case itself.
Tozo T10S's charging case has a battery life of 28 hours,
more than that of JLab Go Air by 13 hours
It requires 1.5 hours to fully charge the JLab Go Air's battery. It is recommended to charge fully the battery before using the earbuds for the first time.
Tozo T10S takes 2 hours to fully charge the battery,
more than that of JLab Go Air by 0.5 hours
JLab Go Air's battery capacity is 43mAh, battery power, represents the amount of electrical energy that a battery can keep.
JLab Go Air have a battery level indicator, an indicator notifies you when the earbuds has a low battery. The battery indicator lights indicate the charging status of your device and charging case.
Tozo T10S too have a battery level indicator, charging indicators allow you tell the charging state of your earbuds, whether fully charged, or the battery is running low.
The Tozo T10S use USB TYPE-C, an industry-standard connector for transmitting both data and power in a single cable.
The JLab Go Air have Bluetooth version of 5, Bluetooth is a wireless technology standard that allows data transfers between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves.
Tozo T10S has a Bluetooth version of 5.2,
newer than that of JLab Go Air
. Newer versions provide faster data transfers.
JLab Go Air have a 10meters distance connecting via Bluetooth.
Tozo T10S have a maximum range of 10meters,
equal to that of the JLab Go Air
Tozo T10S support AAC, a codec that is used for Bluetooth audio. It supports 24-bit audio at 250kbps. Since it uses psychoacoustic modeling, it can provide better results than other codecs at a similar bit rate.
Being the highest quality codec that any Bluetooth-supporting Apple product supports, the Tozo T10S will work fine with your iPhone. If you are planning on using these with Android you need to pay even closer attention to codec support for if they only have AAC they won't provide the best audio quality possible, ensure that they also support aptX HD, LDAC, or LHDC as well.
The JLab Go Air have 2 microphones.
The Tozo T10S microphones are 2,
equal to that of the JLab Go Air
. More microphones record better sound quality and enable the earbuds to filter out noise.
The JLab Go Air microphone sensitivity is measured at -38dBV/Pa. The size of the analog or digital output signal from the microphone with its input stimulus is a measure of its sensitivity. It's the 'loudness' of the sound that the microphone can recognize.
The Tozo T10S support fast charging. Most often, technologies like MediaTek’s Pump Express, are used to reduce the amount of time it takes to fully charge a device.
Tozo T10S have a mute function, they support the option to mute/unmute a conversation directly from the device.
The JLab Go Air, so you can access the volume control, pause, play, mute, etc whichever features are supported on the device.
The Tozo T10S too have a control panel on them.
The JLab Go Air have a warranty period of 2 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use following instruction manuals.
The JLab Go Air have voice prompts. Automatically receive information through audio messages, like if there is an issue with the connection.
Tozo T10S also support voice prompts meaning the earbuds notifies you when the battery is low, and you need to recharge the device.
The Tozo T10S come with a special pouch. Carrying earbuds without a case, or putting them in your bag without a casing can easily damage them.