Overall Score 5.3 Represents average audio ecosystem compatibility score.
Overall Score 4.9 Represents average audio ecosystem compatibility score.
Category | Features | Urbanista Copenhagen | JLab Go Air |
---|---|---|---|
DESIGN | ingress protection (ip) rating | IPX4 | IP44 |
weight | ✗ | 10g | |
has no wires or cables | ✓ | ✓ | |
sweat resistance | ✓ | ✓ | |
has stereo speakers | ✓ | ✓ | |
SOUND QUALITY | has passive noise reduction | ✗ | ✓ |
driver unit size | 12mm | 8mm | |
lowest frequency | 20Hz | 20Hz | |
highest frequency | 20000Hz | 20000Hz | |
sound pressure level | 115dB/mW | 103dB/mW | |
has a neodymium magnet | ✗ | ✓ | |
POWER | battery life | 8hours | 5hours |
battery life of charging case | 24hours | 15hours | |
charge time | 1.5hours | 1.5hours | |
battery power | ✗ | 43mAh | |
has a battery level indicator | ✓ | ✓ | |
CONNECTIVITY | has usb type-c | ✓ | ✗ |
bluetooth version | v5.2 | v5 | |
maximum bluetooth range | 10meters | 10meters | |
has aac | ✓ | ✗ | |
MICROPHONE | number of microphones | 4only | 2only |
has a noise-canceling microphone | ✓ | ✗ | |
mic sensitivity | ✗ | -38dBV/Pa | |
EXTRAS | has find earbuds feature | ✓ | ✗ |
supports fast charging | ✓ | ✗ | |
has a mute function | ✓ | ✗ | |
control panel placed on a device | ✓ | ✓ | |
warranty period | 1Years | 2Years | |
has voice prompts | ✓ | ✓ | |
travel bag is included | ✓ | ✗ | |
See price on Amazon | See price on Amazon |
Ingress protection ratings is the level of protection offered by a casing, against solids and liquids. In the format of IPXX, 'X' represents a number The first value refers to protection against solids say dust, while the second refers to resistance against liquids (sweat).
Scoring IP44, the JLab Go Air's rating for solids indicates that they are protected against objects greater than 1.0mm such as wire, and the second value of 4 means that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes.
In comparison to the JLab Go Air, Urbanista Copenhagen have a rating of IPX4 meaning that
no data available to specify a protection rating
and that of liquids is that,
they both have the same rating against liquids
The JLab Go Air have a weight of 10g . We consider a lower weight best for the reason that lighter devices are more comfortable to transport.
True wireless devices have no wires linking any part of the device together, JLab Go Air are true wireless for this case since they have no wires. This is a major difference since wireless earbuds have wires connecting the two earbuds .
Urbanista Copenhagen also is true wireless since it has no wires connecting the 2 earbuds together.
JLab Go Air are resistant to sweat
Urbanista Copenhagen's resistance to sweat makes both devices good for use while doing sports such as long-distance running, marathons, training in workout bodysuits, etc
JLab Go Air have stereo speakers, what this means is that JLab Go Air's speakers deliver sound from separate channels on both left and right sides, creating a richer sound and a better listening experience.
The Urbanista Copenhagen also have stereo speakers
JLab Go Air sit tightly in place, creating a sound seal that tones down background sounds and also prevents the device voice audio from leaking out at the same.
JLab Go Air driver unit is 8mm in diameter, the bigger the unit the more powerful, and can produce better bass.
The driver unit is basically a mini speaker that makes sound in the device, its size corellates with the loudness of the earbuds.
Urbanista Copenhagen driver unit is 12mm in diameter,
making them have a larger driver unit than that of JLab Go Air by 4mm
, as many tend to believe that driver units of a bigger size automatically produce better sound quality.
However, large drivers find it difficult to produce high frequencies so it's true that, larger drivers can generate louder sound, but this does not mean that they deliver better quality sound.
JLab Go Air's lowest frequency is at 20Hz, low-frequency response inidcates how well a particular audio device generates low audible frequencies and if it makes any changes to the signal while at it.
Urbanista Copenhagen's lowest frequency is at 20Hz, this means that
both devices produce equal bass
The JLab Go Air's highest frequency is at 20000Hz, high-frequency response tells how well a particular audio component generates high recognizable frequencies and if it adjustments to the signal on its way through.
Urbanista Copenhagen's highest frequency is at 20000Hz, this means that
both devices produce equal treble
SPL, is the pressure level of sound, in decibels, dB, JLab Go Air's measurement is 103dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
Urbanista Copenhagen's sound pressure level measurement is 115dB/mW. The sound pressure level, something is can be considered differently by different people, so we need to have a way of getting a standard measurement of sound level expressed in numerical terms.
The JLab Go Air have neodymium magnets, when used in earbuds produce a higher sensitivity and substantial sound output using less power to do so. They can help generate music at quite a high SPL, with the use of high magnetic flux.
The JLab Go Air's battery life is 5 hours, these last less than 5 hours of listening which is considered average for a single charge. A device's battery life is given by the manufacturer, and with more battery hours, you get to use it for longer and requires fewer chargings.
Urbanista Copenhagen's battery life is
more than that of JLab Go Air by 3 hours
. Each time you recharge your earbuds, they get a little less playing time. The effect is barely noticeable at first, but over a few years, your wireless earbuds will no longer play for long like they used to.
This is given by the vendor, and the JLab Go Air's case is said to have a charge of 15 hours. A charging case with a longer battery life enables you to recharge your earbuds on the go many times before recharging the case itself.
Urbanista Copenhagen's charging case has a battery life of 24 hours,
more than that of JLab Go Air by 9 hours
It takes 1.5 hours to fully charge the JLab Go Air's battery. It is highly adivsable to fully charge the battery before using the earbuds for the first time.
Urbanista Copenhagen takes 1.5 hours to fully charge the battery,
equal to that of the JLab Go Air
JLab Go Air's battery power is 43mAh, battery capacity, represents the amount of electrical energy that a battery can store.
JLab Go Air have a battery level indicator, an indicator alerts you when the device has a low battery. Its lights display the charging status of your earbuds and case.
Urbanista Copenhagen too have a battery level indicator, these enable you to tell the charging state of your earbuds, whether fully charged, or the battery is running low.
The Urbanista Copenhagen have USB TYPE-C, an industry-standard connector for transmitting both data and power through a single cable.
JLab Go Air have Bluetooth version of 5, Bluetooth is a wireless technology standard that allows data transfers between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves.
Urbanista Copenhagen has a Bluetooth version of 5.2,
newer than that of JLab Go Air
. Newer versions provide faster data transfers.
JLab Go Air have a 10meters distance connecting via Bluetooth.
Urbanista Copenhagen have a maximum range of 10meters,
equal to that of the JLab Go Air
Urbanista Copenhagen support AAC, a codec that is used for Bluetooth audio. It supports 24-bit audio at 250kbps. Because it uses psychoacoustic modeling, it can provide better results than other codecs at a similar bit rate.
Being the highest quality codec that any Bluetooth-supporting Apple product supports, the Urbanista Copenhagen will work well with your MacBook. If you intend on using these with Android , ensure that they also support aptX HD, LDAC, or LHDC as well.
The JLab Go Air have 2 microphones.
The Urbanista Copenhagen microphones are 4,
more than that of JLab Go Air by 2
. More microphones result in better sound quality and enable the earbuds to filter out background sounds.
Urbanista Copenhagen use a noise-canceling type of microphone, these microphones are made to filter out background sounds from the desired sound.
JLab Go Air microphone sensitivity is measured at -38dBV/Pa. The amount of the analog or digital output signal from the microphone with its input stimulus is a calculation of its sensitivity. It's the 'loudness' of the sound that the earbud microphone can recognize.
If misplaced in a room, or can't be found in your bag, Urbanista Copenhagen support the find earbuds feature.
Urbanista Copenhagen support fast charging. Usually, technologies like Qualcomm’s Quick Charge, are used to reduce the amount of time it takes to charge a device.
Urbanista Copenhagen have a mute function, they support the option to mute/unmute a conversation directly from the earbuds.
The JLab Go Air, so you can easily access the volume control, pause, play, mute, etc whichever features are supported on the earbuds.
The Urbanista Copenhagen too have a control panel on them.
The JLab Go Air have a warranty period of 2 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use following instruction manuals.
If covered under the manufacturer’s warranty it is possible to get a replacement a malfunction occurs. Urbanista Copenhagen have a warranty period of 1Years,
less than that of JLab Go Air by 1 Years
.
The JLab Go Air support voice prompts. With voice prompts, you receive information via audio messages, like if there is a problem with the connection.
Urbanista Copenhagen also have voice prompts .i.e the earbuds will notify you if the battery is running low, and it's time to recharge them.
Urbanista Copenhagen come with their own special pouch. Carrying earphones openly, or placing them in your pockets without a cover can easily put them at risk of getting damaged.