JLab Go Air
See price on AmazonOverall Score 5.3 Represents average audio ecosystem compatibility score.
IP ratings refer to the rating of protection given by an enclosure, against dust and liquids. The letters 'IP' are followed by two values The first value means protection against solids such as dust, while the second refers to resistance against liquids (sweat).
Having a value of IP44, the JLab Go Air's rating for solids indicates that they are protected against objects greater than 1.0mm such as wire, and the second value of 4 means that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes.
JLab Go Air have a weight of 10g . We take in account a lower weight best because lighter devices are easier to carry.
True wireless devices have no cables linking any part of the device together, JLab Go Air are true wireless for this matter since they have no cables. This is an important distinction as some wireless earbuds have wires linking the 2 earbuds together.
JLab Go Air are resistant to sweat
JLab Go Air have stereo speakers, what this means is that JLab Go Air's speakers deliver sound from independent channels on both left and right sides, this creates a richer sound and a better listening experience.
JLab Go Air sit well in place, this creates an acoustic seal that tones down your environment sounds while preventing the earbuds voice audio from leaking out at the same.
The JLab Go Air have a unit size of 8mm in diameter, bigger drivers are more powerful, therefor producing better bass. The driver unit is the component that produces sound in the device, its size determines the loudness of the device.
JLab Go Air's lowest frequency is at 20Hz, low-frequency response measures if and how well an audio component generates low frequencies that can be heard, and if it alters the signal while at it.
JLab Go Air's highest frequency is at 20,000Hz, high-frequency response indicates how well a particular audio component produces high human frequencies and if it makes any adjustments to the signal while at it.
The sound pressure level, is the pressure level of sound, measured in decibels, dB, JLab Go Air's measurement is 103dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
The JLab Go Air's battery life is 5 hours, these last less than 5 hours of listening which is considered average for a single charge. A device's battery life is commonly given by the manufacturer, and with longer battery life, you get to use it for longer and requires fewer chargings.
This is given by the vendor, and the JLab Go Air's case is said to have a full charge of 15 hours. A charging case with a longer battery life allows you to recharge your earbuds on the go multiple times before recharging the case itself.
It requires 1.5 hours to fully charge the JLab Go Air's battery. It is recommended to charge fully the battery before using the earbuds for the first time.
JLab Go Air have a battery level indicator, an indicator shows you when the device has a low battery. The battery indicator lights indicate the charging state of your earbuds and case.
The JLab Go Air have Bluetooth version of 5, Bluetooth is a wireless technology standard that enables data movement between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves.
The JLab Go Air have a 10meters distance to connect via Bluetooth.
The JLab Go Air have 2 microphones.
JLab Go Air microphone sensitivity is measured at -38dBV/Pa. The extent of the analog or digital output signal from the microphone with its input stimulus is a calculation of its sensitivity. It's the 'loudness' of the sound that the microphone can pick up.
The JLab Go Air, so you can easily access the volume control, pause, play, mute, etc whichever functions are supported on the device.
The JLab Go Air have a warranty period of 2 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use following instruction manuals.
The JLab Go Air support voice prompts. With voice prompts, you receive information through audio messages, say if there is a problem with the connection.