JEET W1SSee price on Amazon
Overall Score 6.4 Represents average audio ecosystem compatibility score.
Nothing Ear 1See price on Amazon
Overall Score 6 Represents average audio ecosystem compatibility score.
|Category||Features||JEET W1S||Nothing Ear 1|
|DESIGN||ingress protection (ip) rating||ipX5||ipX4|
|has no wires or cables||✗||✓|
|has stereo speakers||✓||✓|
|SOUND QUALITY||has active noise cancellation (noise control)||✗||✓|
|has passive noise reduction||✓||✓|
|driver unit size||11mm||11.6mm|
|sound pressure level||93db/mw||✗|
|battery life of charging case||✗||29hours|
|has wireless charging||✗||✓|
|has a battery level indicator||✓||✓|
|CONNECTIVITY||has usb type-c||✗||✓|
|maximum bluetooth range||10meters||10meters|
|has aptx adaptive||✓||✗|
|has aptx low latency||✓||✗|
|has aptx hd||✓||✗|
|MICROPHONE||number of microphones||1only||6only|
|has a noise-canceling microphone||✗||✓|
|EXTRAS||has ambient sound mode||✓||✓|
|has in/on-ear detection||✓||✓|
|has find earbuds feature||✓||✓|
|supports fast charging||✓||✓|
|has a mute function||✓||✗|
|control panel placed on a device||✓||✓|
|has voice prompts||✓||✓|
|travel bag is included||✓||✓|
|See price on Amazon||See price on Amazon|
Ingress protection ratings refer to the rating of protection offered by an enclosure, against solids and water. The letters 'IP' are followed by two values The first value represents protection against solids such as dust, followed by the one that refers to resistance against liquids (sweat).
Having a value of IPX4, the Nothing Ear 1's rating for solids indicates that no data available to specify a protection rating, and the second number of 4 means that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes.
Compared to the Nothing Ear 1, JEET W1S have a rating of IPX5 meaning that we are not yet certain of their rating with solids (dust) and that of liquids is that, Nothing Ear 1 has a lower liquid rating than JEET W1S
Nothing Ear 1 have a weight of 9.4g . We consider a lower weight best because lighter devices are more comfortable to transport.
The JEET W1S, at 18g are heavier than the Nothing Ear 1 with a difference of 8.6g
For a device to be true wireless it should have no wires connecting any part of the device together, Nothing Ear 1 are true wireless for this case since they have no wires. This is an important difference since wireless earbuds have cables connecting the two earbuds .
The JEET W1S come with wingtips, these are commonly used for workout earbuds and come as an optional add-on to the separate silicone ear tip for a better fit.
Nothing Ear 1 have sweat resistance
JEET W1S's resistance to sweat makes both devices ideal for use during long-distance running, marathons, training in workout bodysuits, etc
Nothing Ear 1 have stereo speakers, what this means is that Nothing Ear 1's speakers deliver sound from independent channels on both left and right sides, this creates a richer sound and a better listening experience.
Both JEET W1S and Nothing Ear 1 have stereo speakers
Active noise cancellation uses advanced technology to actively cancel noise. ANC works when, it listens to the sound pattern of incoming noise and after inverts the soundwaves to cancel it out. In simple terms, it's like having +1 (noise) then producing -1 (counter sound by the device) to make 0 resulting in a reduced level of noise.
Nothing Ear 1 have ANC enabling you to listen at lower levels of volume, good for your ears since you don't need to crank up the earbuds volume to overcome background sounds.
Nothing Ear 1 stay tightly in place, this creates a sound seal that reduces background noise well as preventing the device sound from leaking out at the same.
Both of these devices have passive noise reduction this means that they limit ambient noise without using ANC to cancel it out.
The Nothing Ear 1 driver unit is 11.6mm in diameter, the bigger the unit the more powerful, and can produce better bass.
A driver unit is basically a mini speaker that produces sound in the device, the unit size determines the sound produced by the earbuds.
JEET W1S driver unit is 11mm in diameter, which means that they have a smaller driver unit than that of Nothing Ear 1 by 0.6mm , as many tend to believe that driver units of a bigger size automatically produce better sound quality.
However, large drivers find it difficult to produce high frequencies so yes, larger drivers can generate louder sound, but this does not imply that they deliver better quality sound.
Nothing Ear 1's lowest frequency is at 20Hz, low-frequency response measures if and how well an audio component produces low frequencies that can be heard, and if it alters the signal on its way through.
JEET W1S's lowest frequency is at 20Hz, this implies that both devices can make sound with equal bass
The Nothing Ear 1's highest frequency is at 20,000Hz, high-frequency response tells how well an audio component makes high recognizable frequencies and if it changes to the signal on its way through.
JEET W1S's highest frequency is at 20,000Hz, this means that both devices generate equal treble
SPL, is the pressure level of sound, measured in decibels, dB, JEET W1S's measurement is 93dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
The Nothing Ear 1's battery life is 5 hours, these last less than 5 hours of listening which is considered average before recharge. A device's battery life is given by the manufacturer, and with longer battery life, you get to use it for longer and have to charge the device less often.
JEET W1S's battery life is more than that of Nothing Ear 1 by 6 hours . Every time you recharge your earbuds, they get a little less listening time. The effect is not noticeable at first, but over a few years, your wireless earbuds will no longer play for long like they used to.
The battery life of the charging case is given by the vendor, and Nothing Ear 1's case has a charge of 29 hours. A charging case with more battery hours enables you to recharge your earbuds on the go several times before recharging the case itself.
It requires 1.5 hours to fully charge the Nothing Ear 1's battery. It is recommended to fully charge the battery before using the earbuds for the first time.
The Nothing Ear 1, the device supports wireless charging. To charge the earbuds, you just place down on a supported charging pad.
Nothing Ear 1 have a battery level indicator, an indicator shows you when the earbuds has a low battery. Its lights display the charging state of your earbuds and case.
JEET W1S too have a battery level indicator, these enable you to tell the charging state of your earbuds, whether fully charged, or the battery is running low.
Nothing Ear 1 support USB TYPE-C, an industry-standard connector for transmitting both data and power through a single cable.
Nothing Ear 1 have Bluetooth version of 5.2, Bluetooth is a wireless technology standard that allows data transfers between devices placed in range, using short-wavelength, ultra-high frequency radio waves.
JEET W1S has a Bluetooth version of 4.1, older than that of Nothing Ear 1 . Newer versions provide faster data transfers.
Nothing Ear 1 have a 10meters distance connecting via Bluetooth.
JEET W1S have a maximum range of 10meters, equal to that of the Nothing Ear 1
JEET W1S support AAC, a codec that is used for Bluetooth audio. It supports 24-bit audio at 250kbps. Since it uses psychoacoustic modeling, it provides better results than other codecs at the same bit rate.
Being the highest quality codec that any Bluetooth-supporting Apple product supports, the JEET W1S will work well with your iPhone. If you are planning on using these with Android , ensure that they also support aptX HD, LDAC, or LHDC as well.
JEET W1S support LDAC, a codec developed by Sony which allows streaming high-resolution audio over Bluetooth connections at up to 990 kbps at 32 bit/96 kHz. It is capable of a very high bitrate of 990kbps, providing high-resolution audio.
The JEET W1S support APTX Adaptive, an audio codec for Bluetooth devices that are developed by Qualcomm. It has a variable bit rate (between 279kbps and 420kbps).
JEET W1S support APTX Low Latency, a codec developed by Qualcomm. It uses Bluetooth 5.0 technology to provide low latency audio (around 40ms), which is useful when you want to avoid audio lag for example when playing games.
The JEET W1S support APTX HD, an audio codec for Bluetooth devices that are developed by Qualcomm. It supports high-quality 24-bit audio (at a bit rate of 576kbps).
Latency refers to the time it takes for the audio signal to be transmitted to your earbuds. JEET W1S have a latency of 88ms, a lower latency reduces audio lag and is particularly important when playing games or watching videos.
Nothing Ear 1 have 6 microphones.
While the JEET W1S microphones are 1, less than that of Nothing Ear 1 by 5 . More microphones record better sound quality and enable the earbuds to filter out background sounds.
Nothing Ear 1 have a noise-canceling microphone, these microphones are designed to filter out background sounds from the earbuds' sound.
The Nothing Ear 1 support ambient sound mode, which uses microphones to pass through ambient noises to still be heard even when wearing the earbuds
The JEET W1S support ambient sound mode as well, helpful when you want to listen to music but also be aware of what’s happening around you, say you’re having a jog but still want to hear traffic.
Nothing Ear 1 have in/on-ear detection, the sensors in the earbuds can detect when they are removed from your ears so that the music is paused.
JEET W1S too support in/on-ear detection, automatically pauses your music, or audiobook when you remove earbuds from your ears saving battery life.
When misplaced in a room, or can't be found in your bag, the Nothing Ear 1 have a find earbuds feature.
JEET W1S too have the find earbuds feature. Simply use the device app on your phone to play a sound from your device to help you find them.
Nothing Ear 1 support fast charging. Most often, technologies like Qualcomm’s Quick Charge, are used to lower the time it takes to charge a device.
JEET W1S too support fast charging. This kind is similar to regular charging, only that the battery is filling up much faster. Say, with Quick Charge 3.0, the battery can be charged to 50% in just 30 minutes.
JEET W1S have a mute function, they have the option to mute/unmute a conversation directly from the device.
The Nothing Ear 1, so you can access the volume control, pause, play, mute, etc whichever features are supported on the earbuds.
JEET W1S also have a control panel on them.
Nothing Ear 1 have a warranty period of 1 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use following instruction manuals.
When covered under the manufacturer’s warranty it is possible to get a replacement a malfunction occurs. JEET W1S have a warranty period of 1Years, equal to that of the Nothing Ear 1 .
Nothing Ear 1 have voice prompts. With voice prompts, you receive information via audio messages, say if there is an issue with the connection.
The JEET W1S too have voice prompts .i.e the earbuds will notify you if the battery is low, and it's time to recharge them.
Nothing Ear 1 come with their own special pouch. Carrying earphones openly, or placing them in your bag without a cover may easily damage them.
JEET W1S too have a travel bag included, which offers safe transportation.