Overall Score 7 Represents average audio ecosystem compatibility score.
Overall Score 6.6 Represents average audio ecosystem compatibility score.
Category | Features | Nothing Ear 2 | Bang & Olufsen Beoplay EX |
---|---|---|---|
DESIGN | ingress protection (ip) rating | ip54 | ip57 |
weight | 9g | 12g | |
has no wires or cables | ✓ | ✓ | |
sweat resistance | ✓ | ✓ | |
has an earbud foam | ✓ | ✗ | |
has stereo speakers | ✓ | ✓ | |
SOUND QUALITY | has active noise cancellation (noise control) | ✓ | ✓ |
has passive noise reduction | ✓ | ✓ | |
driver unit size | 11.6mm | 9.2mm | |
lowest frequency | 20hz | 20hz | |
highest frequency | 20,000hz | 20,000hz | |
POWER | battery life | 6hours | 8hours |
battery life of charging case | 30hours | 20hours | |
charge time | 1hours | 1.5hours | |
battery power | 33mah | 70mah | |
has wireless charging | ✓ | ✓ | |
has a battery level indicator | ✓ | ✓ | |
CONNECTIVITY | has usb type-c | ✓ | ✓ |
bluetooth version | v5.3 | v5.2 | |
maximum bluetooth range | 10meters | 10meters | |
has aac | ✓ | ✓ | |
has aptx adaptive | ✗ | ✓ | |
MICROPHONE | number of microphones | 6only | 6only |
has a noise-canceling microphone | ✓ | ✓ | |
mic sensitivity | -40dbv/pa | ✗ | |
EXTRAS | has ambient sound mode | ✓ | ✓ |
has in/on-ear detection | ✓ | ✗ | |
has find earbuds feature | ✓ | ✗ | |
supports fast charging | ✓ | ✓ | |
multipoint count | 2only | 2only | |
has a mute function | ✓ | ✓ | |
control panel placed on a device | ✓ | ✓ | |
warranty period | ✗ | 3years | |
has voice prompts | ✓ | ✓ | |
travel bag is included | ✓ | ✓ | |
See price on Amazon | See price on Amazon |
IP ratings refer to the rating of protection given by a casing, against dust and liquids. The letters 'IP' are followed by two values The first value of the IP rating means protection against solids say dust, while the second refers to protection against liquids (sweat).
Scoring IP54, the Nothing Ear 2's rating for solids indicates that ingress of dust is not totally prevented but dust does not enter in harmful quantities to interfere with the correct operation or impair safety, and of liquids that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes.
Compared to the Nothing Ear 2, Bang & Olufsen Beoplay EX have a rating of IP57 meaning that
they both have the same rating against dust
and that of liquids is that,
Bang & Olufsen Beoplay EX has a higher liquid rating than Nothing Ear 2
Nothing Ear 2 have a weight of 9g . We consider a lower weight better for the reason that lighter devices are easier to transport.
Bang & Olufsen Beoplay EX, at 12g
are heavier than the Nothing Ear 2 by of 3g
For a device to be true wireless it must have no cables connecting any part of the device together, Nothing Ear 2 are true wireless for this matter since they don't have cables. This is a major difference as some wireless earbuds have wires connecting the pair of earbuds together.
Bang & Olufsen Beoplay EX also is true wireless because it has no cables linking the two earbuds .
Nothing Ear 2 have sweat resistance
Bang & Olufsen Beoplay EX's resistance to sweat makes both devices fit for use during long-distance running, marathons, cardio sweat workouts , etc
An earbud foam is made to be ultracompact and lightweight, with almost no interference with earrings, spectacles, hats, or hairstyles. The Nothing Ear 2 have an earbud foam for some people it is more comfortable than the in-ear foam.
Nothing Ear 2 have stereo speakers, devices with stereo speakers deliver sound from separate channels on both left and right sides, creating a richer sound and a better listening experience.
Both Bang & Olufsen Beoplay EX and Nothing Ear 2 have stereo speakers
Active noise cancellation uses more advanced technology to actively counter noise. How it works, it listens to the sound pattern of incoming noise and then generates a mirror signal to counter it. Simply put, it's like having +1 (sound from your surrounding) then adding -1 (counter sound by the device) to make zero hence "diluting" the noise.
Nothing Ear 2 have Active Noise Cancellation allowing you to listen at lower levels of volume, causing less ear fatigue as you don't need to crank up the device volume to overcome background sounds.
The Bang & Olufsen Beoplay EX too have ANC making both devices ideal for flights and morning commutes. Each operate with different noise cancellation types, pick the setting that suits your commute or that suites your chill time.
Nothing Ear 2 sit tightly in place, this creates a sound seal that tones down your environment sounds while preventing the device voice audio from leaking out at the same.
Both of these devices have passive noise reduction this means that they reduce ambient noise instead of actively using technology to cancel it out.
Nothing Ear 2 driver unit is 11.6mm in diameter, the bigger the unit the more powerful, therefor producing better bass.
The driver unit is basically a mini speaker that produces sound in the device, the unit size determines the loudness of the device.
Bang & Olufsen Beoplay EX driver unit is 9.2mm in diameter,
which implies that they have a smaller driver unit than that of Nothing Ear 2 by 2.4mm
, a common assumption that driver units of a bigger size automatically produce better sound quality.
However, large drivers usually have difficulty producing high frequencies so yes, larger drivers can generate louder sound, but this does not imply that they produce better quality sound.
The Nothing Ear 2's lowest frequency is at 20Hz, low-frequency response inidcates how well a particular audio device generates low frequencies that can be heard, and if it makes any changes to the signal while at it.
Bang & Olufsen Beoplay EX's lowest frequency is at 20Hz, this implies that
both devices make sound with equal bass
Nothing Ear 2's highest frequency is at 20,000Hz, high-frequency response shows how well a particular audio component produces high human frequencies and if it makes any adjustments to the signal on its way through.
Bang & Olufsen Beoplay EX's highest frequency is at 20,000Hz, this implies that
both devices generate equal treble
The Nothing Ear 2's battery life is 6 hours, these last longer than 5 hours of listening which is considered average before recharge. A device's battery life is usually given by the manufacturer, and with more battery hours, you get to use it for longer and requires fewer chargings.
Bang & Olufsen Beoplay EX's battery life is
more than that of Nothing Ear 2 by 2 hours
. Each time you recharge your earbuds, they get a little less playing time. The effect is barely noticeable at first, but over time, your wireless earbuds will no longer play for long like they used to.
The battery life of the charging case is given by the vendor, and Nothing Ear 2's case is said to have a full charge of 30 hours. A charging case with more battery hours enables you to recharge your earbuds on the go multiple times before having to recharge the case itself.
Bang & Olufsen Beoplay EX's charging case has a battery life of 20 hours,
less than that of Nothing Ear 2 by 10 hours
It takes 1 hours to fully charge the Nothing Ear 2's battery. It is recommended to fully charge the battery before using the earbuds when they have been unused for long periods.
Bang & Olufsen Beoplay EX takes 1.5 hours to fully charge the battery,
more than that of Nothing Ear 2 by 0.5 hours
Nothing Ear 2's battery power is 33mAh, battery capacity, represents the amount of electrical energy that a battery can keep.
Bang & Olufsen Beoplay EX's battery power is 70mAh.
more than that of Nothing Ear 2 by 37mAh
Nothing Ear 2, the device supports wireless charging. To charge the earbuds, you simply place down on a supported charging pad.
Bang & Olufsen Beoplay EX also support wireless charging, take note of the charging standard of a device.
Nothing Ear 2 have a battery level indicator, an indicator alerts you when the device has a low battery. The battery indicator lights show the charging status of your device and case.
Bang & Olufsen Beoplay EX too have a battery level indicator, charging indicators enable you tell the charging state of your earbuds, whether fully charged, or the battery is running low.
Nothing Ear 2 support USB TYPE-C, an industry-standard connector for transmitting both data and power through a single cable.
Bang & Olufsen Beoplay EX too use USB TYPE-C. This USB-C plug comes along with most current laptops, phones, and tablets.
The Nothing Ear 2 have Bluetooth version of 5.3, Bluetooth is a wireless technology standard that enables data transfers between devices placed in range, using short-wavelength, ultra-high frequency radio waves.
Bang & Olufsen Beoplay EX has a Bluetooth version of 5.2,
older than that of Nothing Ear 2
. Newer versions provide faster data transfers.
The Nothing Ear 2 have a 10meters distance connecting via Bluetooth.
Bang & Olufsen Beoplay EX have a maximum range of 10meters,
equal to that of the Nothing Ear 2
Nothing Ear 2 support AAC, a codec used for Bluetooth audio. It supports 24-bit audio at 250kbps. Since it uses psychoacoustic modeling, it can provide better results than other codecs at the same bit rate.
Since its the highest quality codec that any Bluetooth-supporting Apple product supports, the Nothing Ear 2 will work well with your iPhone. If you intend on using these with Android you need to pay even closer attention to codec support for if they only have AAC they won't provide the best audio quality possible, ensure that they also support aptX HD, LDAC, or LHDC as well.
The Bang & Olufsen Beoplay EX support AAC as well. Designed to be the successor of the MP3 format, AAC generally achieves higher sound quality than MP3 encoders at the same bit rate.
Bang & Olufsen Beoplay EX support APTX Adaptive, an audio codec for Bluetooth devices that are developed by Qualcomm. It has a variable bit rate (between 279kbps and 420kbps).
Nothing Ear 2 have 6 microphones.
While the Bang & Olufsen Beoplay EX microphones are 6,
equal to that of the Nothing Ear 2
. More microphones record better sound quality and enable the device to filter out noise.
The Nothing Ear 2 use a noise-canceling microphone, these microphones are intended to reduce background sounds from the earbuds' sound.
The Bang & Olufsen Beoplay EX too use a noise-canceling microphone. Especially useful in noisy environments.
The Nothing Ear 2 microphone sensitivity is measured at -40dBV/Pa. The extent of the analog or digital output signal from the microphone with its input stimulus is a calculation of its sensitivity. It's the 'loudness' of the voice that the earbud microphone can recognize.
Nothing Ear 2 support ambient sound mode, which uses microphones to pass through ambient noises to still be heard even while wearing the earbuds
The Bang & Olufsen Beoplay EX support ambient sound mode as well, helpful when you want to listen to music while being aware of your surrounding, say you’re having a jog but still want to be able to hear traffic.
Nothing Ear 2 have in/on-ear detection, the sensors in the device can detect when they are removed from your ears so that the music is paused.
When misplaced in a room, or can't easily find them in your bag, Nothing Ear 2 have a find earbuds feature.
The Nothing Ear 2 support fast charging. Usually, technologies like Qualcomm’s Quick Charge, are used to reduce the amount of time it takes to charge the earbuds.
Bang & Olufsen Beoplay EX too support fast charging. This kind is similar to regular charging, just that the battery fills up much faster. Say, with Quick Charge 3.0, the battery can be charged to 50% in thirty minutes.
Nothing Ear 2 have a multipoint of 2 connections, the multipoint feature allows you connect to more than one Bluetooth device and switch between them. For example, you can easily switch calls from one device to another without manually disconnect and reconnect.
The Bang & Olufsen Beoplay EX have a multipoint count of 2,
equal to that of the Nothing Ear 2
. Bluetooth multipoint is useful because you can be on one call and not miss notifications from another connected device.
Nothing Ear 2 have a mute function, they have the option to mute/unmute a conversation directly from the device.
The Bang & Olufsen Beoplay EX also support this function. The mute function means that you unilaterally turn off the device's microphone, but you can still hear the other party talk.
The Nothing Ear 2, so you can access the volume control, pause, play, mute, etc whichever features are supported on the earbuds.
Bang & Olufsen Beoplay EX also have a control panel on them.
The Bang & Olufsen Beoplay EX have a warranty period of 3 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use following instruction manuals.
Nothing Ear 2 have voice prompts. With voice prompts, you receive information through audio messages, like if there is an issue with the connection.
The Bang & Olufsen Beoplay EX also support voice prompts meaning the device notifies you if the battery is low, and you need to recharge them.
The Nothing Ear 2 come with a special case. Carrying earbuds without a case, or putting them inside your bag without a cover may easily put them at risk of getting damaged.
Bang & Olufsen Beoplay EX also have a case included, which is useful for safe transportation.