Beats Fit ProSee price on Amazon
Overall Score 7.4 Represents average audio ecosystem compatibility score.
Nothing Ear 2See price on Amazon
Overall Score 7 Represents average audio ecosystem compatibility score.
|Category||Features||Beats Fit Pro||Nothing Ear 2|
|DESIGN||ingress protection (ip) rating||ipX4||ip54|
|has no wires or cables||✓||✓|
|has an earbud foam||✗||✓|
|has stereo speakers||✓||✓|
|SOUND QUALITY||has active noise cancellation (noise control)||✓||✓|
|has passive noise reduction||✓||✓|
|driver unit size||9.5mm||11.6mm|
|sound pressure level||101.3db/mw||✗|
|has a neodymium magnet||✓||✗|
|battery life of charging case||21hours||30hours|
|has wireless charging||✗||✓|
|has a battery level indicator||✓||✓|
|CONNECTIVITY||has usb type-c||✓||✓|
|maximum bluetooth range||10meters||10meters|
|MICROPHONE||number of microphones||6only||6only|
|has a noise-canceling microphone||✓||✓|
|EXTRAS||has ambient sound mode||✓||✓|
|has in/on-ear detection||✓||✓|
|has find earbuds feature||✓||✓|
|supports fast charging||✓||✓|
|has a mute function||✓||✓|
|control panel placed on a device||✓||✓|
|has voice prompts||✓||✓|
|travel bag is included||✓||✓|
|See price on Amazon||See price on Amazon|
Ingress protection ratings refer to the rating of protection given by an enclosure, against dust and water. The letters 'IP' are followed by two values The first value of the IP rating refers to protection against solids such as dust, while the second refers to resistance against liquids (sweat).
Scoring IP54, the Nothing Ear 2's rating is read as, the first value of 5 denotes that ingress of dust is not totally prevented but dust does not enter in harmful quantities to interfere with the correct operation or impair safety, and of liquids that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes.
Compared to the Nothing Ear 2, Beats Fit Pro have a rating of IPX4 meaning that no data available to specify a protection rating and that of liquids is that, they both have the same rating against liquids
The Nothing Ear 2 have a weight of 9g . We prefer a lower weight better because lighter devices are easier to move with.
Beats Fit Pro, at 11.2g weigh more than the Nothing Ear 2 by of 2.2g
True wireless devices have no wires connecting any part of the device together, Nothing Ear 2 are true wireless for this matter since they don't have wires. This is a key distinction as some wireless earbuds have cables linking the pair of earbuds together.
Beats Fit Pro also is true wireless since it doesn't have wires linking the 2 earbuds .
Beats Fit Pro have wingtips, these are commonly used for workout earbuds and are usually an optional add-on to the separate silicone ear tip for a better fit.
Nothing Ear 2 are resistant to sweat
Beats Fit Pro's resistance to sweat makes both devices fit for use while doing sports such as long-distance running, marathons, cardio sweat workouts , etc
An earbud foam is designed to be ultracompact and lightweight, with almost no interference with earrings, spectacles, hats, or hairstyles. The Nothing Ear 2 have an earbud foam for some people it is more comfortable than the in-ear foam.
Nothing Ear 2 have stereo speakers, what this means is that Nothing Ear 2's speakers deliver sound from separate channels on both left and right sides, this creates a richer sound and a better listening experience.
Both Beats Fit Pro and Nothing Ear 2 have stereo speakers
Active noise cancellation makes use of advanced kind of tech to reduce unwanted ambient sounds. How it works, it detects and analyzes the sound pattern of incoming noise and generates a mirror signal to counter it. Simply put, it's like taking +1 (sound from your surrounding) then adding -1 (inverted noise) giving 0 which results in a reduced level of noise.
Nothing Ear 2 have Active Noise Cancellation enabling you to listen at lower volume levels, causing less ear fatigue since you don't need to crank up the earbuds volume to outcompete background sounds.
Beats Fit Pro too have Active Noise Cancellation which makes both devices ideal for flights and morning travels. The Nothing Ear 2 and Beats Fit Pro work with different noise cancellation modes, pick the setting that suits your commute or that suites your chill time.
The Nothing Ear 2 sit well in place, this creates an acoustic covering that tones down your environment noise well as preventing the earbuds voice audio from leaking out at the same.
Both Beats Fit Pro, and Nothing Ear 2 have passive noise reduction this means that both limit ambient noise instead of actively using ANC to cancel it out.
The Nothing Ear 2 have a unit size of 11.6mm in diameter, the bigger the unit the more powerful, therefor producing better bass.
A driver unit is basically a mini speaker that produces sound in the device, its size determines the sound produced by the device.
Beats Fit Pro driver unit is 9.5mm in diameter, which means that they have a smaller driver unit than that of Nothing Ear 2 by 2.1mm , many people have a misconception that driver units of a bigger size automatically produce better sound quality.
However, large drivers find it difficult to produce high frequencies so yes, larger drivers can generate louder sound, but this does not indicate that they produce better quality sound.
Nothing Ear 2's lowest frequency is at 20Hz, low-frequency response inidcates how well an audio component produces low recognizable frequencies and if it makes any changes to the signal while at it.
Beats Fit Pro's lowest frequency is at 20Hz, this means that both devices can produce equal bass
The Nothing Ear 2's highest frequency is at 20,000Hz, high-frequency response shows how well a particular audio component makes high audible frequencies and if it makes any changes to the signal while at it.
Beats Fit Pro's highest frequency is at 20,000Hz, this implies that both devices generate equal treble
SPL, is the level of pressure of sound, measured in decibels, dB, Beats Fit Pro's measurement is 101.3dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
The Beats Fit Pro have neodymium magnets, when used in earbuds produce a higher sensitivity and substantial sound output using less power to do so. They can help generate music at quite a high sound pressure level, using high magnetic flux.
The Nothing Ear 2's battery life is 6 hours, these last longer than 5 hours of listening which is considered average for a single charge. A device's battery life is usually given by the manufacturer, and with longer battery life, you get to use it for longer and requires fewer chargings.
Beats Fit Pro's battery life is more than that of Nothing Ear 2 by 1 hours . Each time you recharge your device, they get a little less playing time. The effect is not noticeable at first, but over time, your wireless earbuds will no longer play for long like they used to.
The battery life of the charging case is given by the manufacturer, and the Nothing Ear 2's case has a full charge of 30 hours. A charging case with a longer battery life allows you to recharge your earbuds on the go several times before recharging the case itself.
Beats Fit Pro's charging case has a battery life of 21 hours, less than that of Nothing Ear 2 by 9 hours
It takes 1 hours to fully charge the Nothing Ear 2's battery. It is recommended to charge fully the battery before using the earbuds when they have been in storage for extended periods.
Beats Fit Pro takes 1 hours to fully charge the battery, equal to that of the Nothing Ear 2
Nothing Ear 2's battery capacity is 33mAh, battery capacity, represents the amount of electrical energy that a battery can keep.
Beats Fit Pro's battery power is 55mAh. more than that of Nothing Ear 2 by 22mAh
The Nothing Ear 2, the device supports wireless charging. To charge the earbuds, you just place down on a supported charging pad.
The Nothing Ear 2 have a battery level indicator, an indicator notifies you when the earbuds has a low battery. Its lights display the charging state of your device and case.
Beats Fit Pro too have a battery level indicator, these enable you tell the charging state of your earbuds, whether fully charged, or the battery is running low.
Nothing Ear 2 use USB TYPE-C, an industry-standard connector for transmitting both data and power in a single cable.
Beats Fit Pro too use USB TYPE-C. This USB-C plug comes along with most current laptops, phones, and tablets.
Nothing Ear 2 have Bluetooth version of 5.3, Bluetooth is a wireless technology standard that enables data transfers between devices placed in range, using short-wavelength, ultra-high frequency radio waves.
Beats Fit Pro has a Bluetooth version of 5, older than that of Nothing Ear 2 . Newer versions provide faster data transfers.
Nothing Ear 2 have a 10meters distance to connect via Bluetooth.
Beats Fit Pro have a maximum range of 10meters, equal to that of the Nothing Ear 2
Nothing Ear 2 support AAC, a codec used for Bluetooth audio. It supports 24-bit audio at 250kbps. Since it uses psychoacoustic modeling, it provides better results than other codecs at a similar bit rate.
Being the highest quality codec that any Bluetooth-supporting Apple product supports, the Nothing Ear 2 will work well with your iPhone. If you intend on using these with Android , ensure that they also support aptX HD, LDAC, or LHDC as well.
The Beats Fit Pro support AAC as well. Designed to be the successor of the MP3 format, AAC generally achieves higher sound quality than MP3 encoders at the same bit rate.
Latency refers to the time it takes for the audio signal to be transmitted to your earbuds. Beats Fit Pro have a latency of 70ms, a lower latency reduces audio lag and is particularly important when playing games or watching videos.
Nothing Ear 2 have 6 microphones.
While the Beats Fit Pro microphones are 6, equal to that of the Nothing Ear 2 . More microphones record better sound quality and enable the earbuds to filter out background sounds.
Nothing Ear 2 use a noise-canceling type of microphone, these microphones are designed to reduce background sounds from the earbuds' sound.
The Beats Fit Pro too use a noise-canceling microphone. This is useful in noisy areas.
Nothing Ear 2 microphone sensitivity is measured at -40dBV/Pa. The amount of the analog or digital output signal from the microphone with its input stimulus is a calculation of its sensitivity. It's the 'loudness' of the voice that the earbud microphone can pick up.
Nothing Ear 2 support ambient sound mode, which uses microphones to pass through ambient noises so that they can still be heard even while wearing the earbuds
The Beats Fit Pro support ambient sound mode as well, it’s useful when you want to listen to music but also be aware of what’s happening around you, for example when you’re having a run but would still want to be able to hear traffic.
Nothing Ear 2 support in/on-ear detection, the sensors in the earbuds can detect when removed from your ears so that the music is paused.
The Beats Fit Pro too support in/on-ear detection, automatically pauses your music, or audiobook when you remove earbuds from your ears improving your listening experience.
When lost in a room, or can't be found in your bag, the Nothing Ear 2 support the find earbuds feature.
The Beats Fit Pro too have the find earbuds feature. You can use the device app on your smartphone to play an alarm from your earbuds to help you locate them.
The Nothing Ear 2 support fast charging. Most often, technologies like Qualcomm’s Quick Charge, are used to lower the amount of time it takes to charge a device.
Beats Fit Pro support fast charging. This kind is similar to regular charging, only that the battery fills up much faster. For example, with Quick Charge 3.0, the battery can be charged to 50% in 30 minutes.
The Nothing Ear 2 support multipoint of 2 connections, this feature allows you connect to more than one Bluetooth device and switch between them. For example, you can easily switch calls from one device to another without having to manually disconnect and reconnect.
The Beats Fit Pro have a multipoint count of 2, equal to that of the Nothing Ear 2 . Bluetooth multipoint comes in handy when you can be on one call and not miss notifications from another connected device.
The Nothing Ear 2 have a mute function, they support the option to mute/unmute a conversation directly from the earbuds.
The Beats Fit Pro also have the mute function. It means that you are in position turn off the device's microphone, but still hear the other party talk.
The Nothing Ear 2, so you can access the volume control, pause, play, mute, etc whichever features are supported on the device.
Beats Fit Pro also have a control panel on them.
Beats Fit Pro have a warranty period of 1 Years, the period of time that warrant free repair and adjustment services in case of a malfunction occurring under normal use that has followed instruction manuals.
The Nothing Ear 2 support voice prompts. With voice prompts, you receive information through audio messages, say if there is an issue with the connection.
Beats Fit Pro also have voice prompts meaning the device will notify you if the battery is running low, and you need to recharge the device.
Nothing Ear 2 come with their own special case. Carrying earbuds without a case, or placing them inside your pockets without a casing may easily damage them.
Beats Fit Pro too have a case included, which is useful for safe transportation.