Beats Studio Buds Review

IP ratings refer to the rating of protection given by an enclosure, against solids and liquids. In the format of IPXX, 'X' represents a number The first value represents protection against solids such as dust, while the second refers to resistance against liquids (sweat).

Having a value of IPX4, the Beats Studio Buds's rating for solids indicates that no data available to specify a protection rating, and of liquids that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes. The Beats Studio Buds have a weight of 5.1g . We prefer a lower weight better because lighter devices are easier to move with.

True wireless devices have no wires connecting any part of the device together, Beats Studio Buds are true wireless for this matter since they don't have wires. This is a major difference as some wireless earbuds have wires linking the 2 earbuds together. Beats Studio Buds are resistant to sweat Beats Studio Buds have stereo speakers, devices with stereo speakers deliver sound from separate channels on both left and right sides, this creates a richer sound and a better listening experience.

Active noise cancellation makes use of advanced kind of tech to reduce ambient sounds. ANC works when, it studies the sound pattern outside and inside the earbud and after generates a mirror signal to counter it. In simple terms, it's like taking +1 (noise) then adding -1 (counter sound by the device) to make zero resulting in a reduced level of noise.

The Beats Studio Buds have Active Noise Cancellation allowing you to listen at lower levels of volume, causing less ear fatigue as you don't have to crank up the earbuds volume to overcome background noise. The Beats Studio Buds sit tightly in place, creating a sound covering that reduces background noise well as preventing the earbuds music from leaking out at the same. The Beats Studio Buds have a unit size of 8.2mm in diameter, the bigger the unit the more powerful, therefor producing better bass.

A driver unit is the component that produces sound in the device, its size dictates the sound produced by the earbuds. The Beats Studio Buds's lowest frequency is at 20Hz, low-frequency response measures if and how well a particular audio component produces low recognizable frequencies and if it makes any changes to the signal on its way through. Beats Studio Buds's highest frequency is at 20,000Hz, high-frequency response indicates how well an audio device generates high recognizable frequencies and if it adjustments to the signal on its way through.

The sound pressure level, is the pressure level of sound, measured in decibels, dB, Beats Studio Buds's measurement is 100.5dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source. The Beats Studio Buds's battery life is 8 hours, these last longer than 5 hours of listening which is considered average for a single charge.

A device's battery life is usually given by the manufacturer, and with longer battery life, you get to use it for longer and requires fewer chargings. The battery life of the charging case is given by the vendor, and Beats Studio Buds's case is said to have a full charge of 16 hours. A charging case with more battery hours allows you to recharge your earbuds on the go multiple times before having to recharge the case itself.

It requires 1.5 hours to fully charge the Beats Studio Buds's battery. It is highly adivsable to fully charge the battery before using the earbuds when they have been in storage for extended periods. The Beats Studio Buds have a battery level indicator, an indicator alerts you when the earbuds has a low battery.

Its lights indicate the charging status of your earbuds and case. Beats Studio Buds use USB TYPE-C, an industry-standard connector for transmitting both data and power in a single cable. Beats Studio Buds have Bluetooth version of 5.2, Bluetooth is a wireless technology standard that allows data movement between devices placed in range, using short-wavelength, ultra-high frequency radio waves.

The Beats Studio Buds have a 10meters distance to connect via Bluetooth. Beats Studio Buds support AAC, a codec used for Bluetooth audio. It supports 24-bit audio at 250kbps.

Because it uses psychoacoustic modeling, it can provide better results than other codecs at the same bit rate.

Being the highest quality codec that any Bluetooth-supporting Apple product supports, the Beats Studio Buds will work fine with your iPhone. If you are planning on using these with Android , ensure that they also support aptX HD, LDAC, or LHDC as well.

The Beats Studio Buds have 6 microphones. The Beats Studio Buds have a noise-canceling microphone, these microphones are designed to reduce noise from the desired sound. Beats Studio Buds support ambient sound mode, which uses microphones to channel ambient sound to still be heard even while wearing them If lost in a room, or can't easily find them in your bag, the Beats Studio Buds have a find earbuds feature.

Beats Studio Buds support fast charging. Commonly, technologies like MediaTek’s Pump Express, are used to lower the amount of time it takes to charge the earbuds. The Beats Studio Buds have a multipoint of 2 connections, the multipoint feature allows you connect to more than one Bluetooth device and switch between them.

Say, you can easily switch calls from one device to another without manually disconnect and reconnect. The Beats Studio Buds have a mute function, they have the feature to mute/unmute a conversation directly from the earbuds. The Beats Studio Buds, so you can access the volume control, pause, play, mute, etc whichever features are supported on the earbuds.

The Beats Studio Buds have voice prompts. With voice prompts, you receive information through audio messages, say if there is a problem with the connection. Beats Studio Buds come with a special pouch.

Carrying earphones without a case, or putting them in your bag without a casing can easily put them at risk of getting damaged.