Nothing Ear 2
See price on AmazonOverall Score 7 Represents average audio ecosystem compatibility score.
IP ratings is the level of protection offered by a casing, against solids and liquids. In the format of IPXX, 'X' represents a number The first value refers to protection against solids such as dust, while the second refers to protection against liquids (sweat).
Having a value of IP54, the Nothing Ear 2's rating is read as, the first value of 5 denotes that ingress of dust is not totally prevented but dust does not enter in harmful quantities to interfere with the correct operation or impair safety, and the second value of 4 means that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes.
The Nothing Ear 2 have a weight of 9g . We take in account a lower weight best because lighter devices are more comfortable to carry.
True wireless devices have no cables connecting any part of the device together, Nothing Ear 2 are true wireless for this matter since they have no cables. This is a major distinction since wireless earbuds have wires linking the 2 earbuds together.
Nothing Ear 2 are resistant to sweat
The earbud foam is made to be ultracompact and lightweight, with little interference with earrings, spectacles, hats, or hairstyles. The Nothing Ear 2 have an earbud foam to some it is more comfortable than the in-ear foam.
Nothing Ear 2 have stereo speakers, what this means is that Nothing Ear 2's speakers deliver sound from independent channels on both left and right sides, this creates a richer sound and a better listening experience.
Active noise cancellation utilises advanced technology to actively cancel noise. How it works, it studies the sound pattern of incoming noise and then generates a mirror signal to cancel it out. In simple terms, it's like having +1 (sound from your surrounding) and producing -1 (counter sound by the device) to make 0 hence "diluting" the noise.
Nothing Ear 2 have ANC allowing you to listen at lower volume levels, good for your ears as you don't need to crank up the device volume to overcome background sounds.
Nothing Ear 2 stay tightly in place, this creates an acoustic seal that tones down background noise and also prevents the device music from leaking out .
Nothing Ear 2 have a unit size of 11.6mm in diameter, bigger drivers are more powerful, and can produce better bass. A driver unit is basically a mini speaker that makes sound in the device, its size dictates the sound produced by the earbuds.
The Nothing Ear 2's lowest frequency is at 20Hz, low-frequency response inidcates how well a particular audio device produces low recognizable frequencies and if it makes any changes to the signal on its way through.
Nothing Ear 2's highest frequency is at 20,000Hz, high-frequency response shows how well a particular audio device makes high recognizable frequencies and if it makes any changes to the signal on its way through.
The Nothing Ear 2's battery life is 6 hours, these last longer than 5 hours of listening which is considered average before recharge. A device's battery life is commonly given by the manufacturer, and with longer battery life, you get to use it for longer and requires fewer chargings.
This is given by the vendor, and the Nothing Ear 2's case is said to have a charge of 30 hours. A charging case with more battery hours allows you to recharge your earbuds on the go multiple times before having to recharge the case itself.
It requires 1 hours to fully charge the Nothing Ear 2's battery. It is recommended to charge fully the battery before using the earbuds for the first time.
Nothing Ear 2's battery power is 33mAh, battery power, shows the amount of electrical energy that a battery can store.
Nothing Ear 2, the device supports wireless charging. To charge the device, you simply place down on a supported charging pad.
The Nothing Ear 2 have a battery level indicator, an indicator alerts you when the earbuds has a low battery. Its lights indicate the charging status of your device and charging case.
Nothing Ear 2 have USB TYPE-C, an industry-standard connector for transmitting both data and power in a single cable.
Nothing Ear 2 have Bluetooth version of 5.3, Bluetooth is a wireless technology standard that enables data transfers between devices placed in range, using short-wavelength, ultra-high frequency radio waves.
Nothing Ear 2 have a 10meters distance to connect via Bluetooth.
Nothing Ear 2 support AAC, a codec that is used for Bluetooth audio. It supports 24-bit audio at 250kbps. Since it uses psychoacoustic modeling, it can provide better results than other codecs at the same bit rate.
Being the highest quality codec that any Bluetooth-supporting Apple product supports, the Nothing Ear 2 will work well with your iPad. If you intend on using these with Android you need to pay even closer attention to codec support for if they only have AAC they won't provide the best audio quality possible, ensure that they also support aptX HD, LDAC, or LHDC as well.
Nothing Ear 2 have 6 microphones.
The Nothing Ear 2 have a noise-canceling type of microphone, these microphones are intended to filter out background sounds from the earbuds' sound.
The Nothing Ear 2 microphone sensitivity is measured at -40dBV/Pa. The magnitude of the analog or digital output signal from the microphone with its input stimulus is a measure of its sensitivity. It's the 'loudness' of the voice that the earbud microphone can recognize.
The Nothing Ear 2 support ambient sound mode, which uses microphones to pass through ambient noises to still be heard even when wearing the earbuds
The Nothing Ear 2 have in/on-ear detection, the sensors in the earbuds can detect when removed from your ears so that the music is paused.
When misplaced in a room, or can't be found in your bag, Nothing Ear 2 support the find earbuds feature.
The Nothing Ear 2 support fast charging. Commonly, technologies like MediaTek’s Pump Express, are used to lower the amount of time it takes to charge the earbuds.
Nothing Ear 2 support multipoint of 2 connections, the multipoint feature allows you connect to more than one Bluetooth device and switch between them. For example, you can switch calls from one device to another without manually disconnect and reconnect.
Nothing Ear 2 have a mute function, they have the feature to mute/unmute a conversation directly from the earbuds.
With the Nothing Ear 2, so you can easily access the volume control, pause, play, mute, etc whichever features are supported on the device.
Nothing Ear 2 support voice prompts. Automatically receive information through audio messages, say if there is an issue with the connection.
Nothing Ear 2 come with their own special case. Carrying earbuds openly, or putting them in your bag without a cover may easily damage them.