Sony WF 1000XM4
See price on AmazonOverall Score 8.3 Represents average audio ecosystem compatibility score.
Nothing Ear 2
See price on AmazonOverall Score 7.8 Represents average audio ecosystem compatibility score.
Category | Features | Sony WF 1000XM4 | Nothing Ear 2 |
---|---|---|---|
DESIGN | ingress protection (ip) rating | IPX4 | IP54 |
weight | 7.1g | 9g | |
has no wires or cables | ✓ | ✓ | |
sweat resistance | ✓ | ✓ | |
has stereo speakers | ✓ | ✓ | |
SOUND QUALITY | has active noise cancellation (noise control) | ✓ | ✓ |
has passive noise reduction | ✓ | ✓ | |
driver unit size | 6mm | 11.6mm | |
lowest frequency | 20Hz | 20Hz | |
highest frequency | 40,000Hz | 20,000Hz | |
sound pressure level | 105dB/mW | ✗ | |
POWER | battery life | 8hours | 6hours |
battery life of charging case | 16hours | 30hours | |
charge time | 1.5hours | 1hours | |
has wireless charging | ✓ | ✓ | |
has a battery level indicator | ✓ | ✓ | |
CONNECTIVITY | has usb type-c | ✓ | ✓ |
bluetooth version | v5.2 | v5.3 | |
maximum bluetooth range | 10meters | 10meters | |
has aac | ✓ | ✓ | |
has ldac | ✓ | ✗ | |
has aptx hd | ✓ | ✗ | |
MICROPHONE | number of microphones | 4only | 6only |
has a noise-canceling microphone | ✓ | ✓ | |
mic sensitivity | ✗ | -40dBV/Pa | |
EXTRAS | has ambient sound mode | ✓ | ✓ |
has in/on-ear detection | ✓ | ✓ | |
has find earbuds feature | ✓ | ✓ | |
supports fast charging | ✓ | ✓ | |
multipoint count | 2only | 2only | |
has a mute function | ✓ | ✓ | |
control panel placed on a device | ✓ | ✓ | |
has voice prompts | ✓ | ✓ | |
travel bag is included | ✓ | ✓ | |
See price on Amazon | See price on Amazon |
IP ratings is the rating of protection offered by an enclosure, against dust and water. The letters 'IP' are followed by two values The first value of the IP rating represents protection against solids say dust, followed by the one that refers to resistance against liquids (sweat).
Scoring IP54, the Nothing Ear 2's rating is read as, the first number of 5 denotes that ingress of dust is not totally prevented but dust does not enter in harmful quantities to interfere with the correct operation or impair safety, and the second value of 4 means that they can withstand low pressure spray similar to that of a shower head when tilted at 180° for 10 minutes.
In comparison to the Nothing Ear 2, Sony WF 1000XM4 have a rating of IPX4 meaning that
no data available to specify a protection rating
and that of liquids is that,
they both have the same rating against liquids
Nothing Ear 2 have a weight of 9g . We consider a lower weight best for the reason that lighter devices are more comfortable to transport.
The Sony WF 1000XM4, at 7.1g
are lighter than the Nothing Ear 2 by -1.9g
True wireless devices have no cables connecting any part of the device together, Nothing Ear 2 are true wireless for this case since they have no cables. This is an important distinction as some wireless earbuds have wires linking the pair of earbuds .
Sony WF 1000XM4 also is true wireless because it doesn't have cables connecting the 2 earbuds together.
Nothing Ear 2 have sweat resistance
Sony WF 1000XM4's resistance to sweat makes both devices good for use while doing sports such as long-distance running, marathons, cardio sweat workouts , etc
Nothing Ear 2 have stereo speakers, what this means is that Nothing Ear 2's speakers deliver sound from separate channels on both left and right sides, creating a richer sound and a better listening experience.
Both Sony WF 1000XM4 and Nothing Ear 2 have stereo speakers
Active noise cancellation uses advanced technology to reduce ambient sounds. ANC works when, it detects and analyzes the sound pattern outside and inside the earbud and then generates a mirror signal to cancel it out. Simply put, it's like having +1 (sound from your surrounding) then adding -1 (inverted noise) to make zero which results in a reduced level of noise.
The Nothing Ear 2 have Active Noise Cancellation enabling you to listen at lower volume levels, good for your ears as you don't have to crank up the device volume to overcome background noise.
Sony WF 1000XM4 too have Active Noise Cancellation which makes either of the devices ideal for flights and rush hour commutes. The Nothing Ear 2 and Sony WF 1000XM4 work with different noise cancellation settings, pick the setting that you prefer for travel or that enhances your relaxation time.
The Nothing Ear 2 stay well in place, this creates a sound seal that tones down your environment sounds and also prevents the earbuds sound from leaking out .
Both Sony WF 1000XM4, and Nothing Ear 2 have passive noise reduction which means that both limit ambient noise without using ANC to cancel it out.
Nothing Ear 2 have a unit size of 11.6mm in diameter, the bigger the unit the more powerful, and can produce better bass.
A driver unit is the component that makes sound in the device, its size corellates with the sound made by the earbuds.
Sony WF 1000XM4 driver unit is 6mm in diameter,
which implies that they have a smaller driver unit than that of Nothing Ear 2 by 5.6mm
, as many tend to believe that driver units of a bigger size automatically produce better sound quality.
However, large drivers usually have difficulty producing high frequencies so it's true that, larger drivers can generate louder sound, but this does not mean that they deliver better quality sound.
Nothing Ear 2's lowest frequency is at 20Hz, low-frequency response inidcates how well an audio device produces low frequencies that can be heard, and if it makes any changes to the signal on its way through.
Sony WF 1000XM4's lowest frequency is at 20Hz, this means that
both devices can make sound with equal bass
The Nothing Ear 2's highest frequency is at 20,000Hz, high-frequency response measures if and how well an audio device generates high human frequencies and if it changes to the signal on its way through.
Sony WF 1000XM4's highest frequency is at 40,000Hz, this means that
Sony WF 1000XM4 can produce a clearer and crispier treble than the Nothing Ear 2
The sound pressure level, is the level of pressure of sound, in decibels, dB, Sony WF 1000XM4's measurement is 105dB/mW. Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
Nothing Ear 2's battery life is 6 hours, these last longer than 5 hours of listening which is considered average for a single charge. A device's battery life is commonly given by the manufacturer, and with more battery hours, you get to use it for longer and requires fewer chargings.
Sony WF 1000XM4's battery life is
more than that of Nothing Ear 2 by 2 hours
. Each time you recharge your device, they get a little less playing time. The effect is not noticeable at first, but over a few years, your wireless earbuds will have shorter listening time.
The battery life of the charging case is given by the manufacturer, and Nothing Ear 2's case has a full charge of 30 hours. A charging case with a longer battery life allows you to recharge your earbuds on the go multiple times before recharging the case itself.
Sony WF 1000XM4's charging case has a battery life of 16 hours,
less than that of Nothing Ear 2 by 14 hours
It requires 1 hours to fully charge the Nothing Ear 2's battery. It is recommended to charge fully the battery before using the earbuds when they have been unused for long periods.
Sony WF 1000XM4 takes 1.5 hours to fully charge the battery,
more than that of Nothing Ear 2 by 0.5 hours
Nothing Ear 2, the device supports wireless charging. To charge the device, you just place down on a compatible charging pad.
Sony WF 1000XM4 also support wireless charging, always look out for the charging standard of a device.
Nothing Ear 2 have a battery level indicator, an indicator shows you when the device has a low battery. The battery indicator lights indicate the charging state of your earbuds and case.
Sony WF 1000XM4 too have a battery level indicator, charging indicators allow you determine the charging state of your earbuds, whether fully charged, or the battery is running low.
Nothing Ear 2 have USB TYPE-C, an industry-standard connector for transmitting both data and power through a single cable.
Sony WF 1000XM4 too use USB TYPE-C. This USB-C plug comes along with most current laptops, phones, and tablets.
The Nothing Ear 2 have Bluetooth version of 5.3, Bluetooth is a wireless technology standard that enables data movement between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves.
Sony WF 1000XM4 has a Bluetooth version of 5.2,
older than that of Nothing Ear 2
. Newer versions provide faster data transfers.
Nothing Ear 2 have a 10meters distance connecting via Bluetooth.
Sony WF 1000XM4 have a maximum range of 10meters,
equal to that of the Nothing Ear 2
Nothing Ear 2 support AAC, a codec that is used for Bluetooth audio. It supports 24-bit audio at 250kbps. Because it uses psychoacoustic modeling, it can provide better results than other codecs at a similar bit rate.
Being the highest quality codec that any Bluetooth-supporting Apple product supports, the Nothing Ear 2 will work fine with your MacBook. If you are planning on using these with Android you need to pay even closer attention to codec support for if they only have AAC they won't provide the best audio quality possible, ensure that they also support aptX HD, LDAC, or LHDC as well.
The Sony WF 1000XM4 support AAC as well. Designed to be the successor of the MP3 format, AAC generally achieves higher sound quality than MP3 encoders at the same bit rate.
The Sony WF 1000XM4 support LDAC, a codec developed by Sony which allows streaming high-resolution audio over Bluetooth connections at up to 990 kbps at 32 bit/96 kHz. It is capable of a very high bitrate of 990kbps, providing high-resolution audio.
The Sony WF 1000XM4 support APTX HD, an audio codec for Bluetooth devices that are developed by Qualcomm. It supports high-quality 24-bit audio (at a bit rate of 576kbps).
Nothing Ear 2 have 6 microphones.
While the Sony WF 1000XM4 microphones are 4,
less than that of Nothing Ear 2 by 2
. More microphones result in better sound quality and help the earbuds to filter out background sounds.
The Nothing Ear 2 have a noise-canceling type of microphone, these microphones are designed to filter out noise from the desired sound.
The Sony WF 1000XM4 too use a noise-canceling type of microphone. Especially useful in noisy areas.
The Nothing Ear 2 microphone sensitivity is measured at -40dBV/Pa. The extent of the analog or digital output signal from the microphone with its input stimulus is a calculation of its sensitivity. It's the 'loudness' of the sound that the earbud microphone can pick up.
Nothing Ear 2 support ambient sound mode, which uses microphones to channel ambient sound so that they can still be heard even while wearing them
The Sony WF 1000XM4 support ambient sound mode as well, helpful when you want to listen to music while being aware of your surrounding, say you’re having a run but would still want to hear traffic.
The Nothing Ear 2 have in/on-ear detection, the sensors in the earbuds can detect when removed from your ears .
Sony WF 1000XM4 too support in/on-ear detection, automatically pauses your music, or audiobook when you remove earbuds from your ears saving battery life.
When misplaced in a room, or can't easily find them in your bag, the Nothing Ear 2 support the find earbuds feature.
The Sony WF 1000XM4 too have the find earbuds feature. Simply use the device app on your smartphone to play a sound from your device to locate them.
The Nothing Ear 2 support fast charging. Commonly, technologies like Qualcomm’s Quick Charge, are used to reduce the time it takes to charge the earbuds.
Sony WF 1000XM4 support fast charging. It's very similar to regular charging, just that the battery fills up much faster. For example, with Quick Charge 3.0, the battery can be charged to 50% in just thirty minutes.
The Nothing Ear 2 support multipoint of 2 connections, the multipoint feature allows you to link to more than one Bluetooth device and switch between them. For example, you can switch calls from one device to another without having to manually disconnect and reconnect.
The Sony WF 1000XM4 have a multipoint count of 2,
equal to that of the Nothing Ear 2
. Bluetooth multipoint is useful because you can be on one call without missing notifications from another connected device.
The Nothing Ear 2 have a mute function, they have the feature to mute/unmute a conversation directly from the earbuds.
The Sony WF 1000XM4 too support the mute function. The mute function means that you unilaterally turn off the earbuds' microphone, but still hear the other party's voice.
With the Nothing Ear 2, so you can access the volume control, pause, play, mute, etc whichever features are supported on the device.
Sony WF 1000XM4 too have a control panel on them.
Nothing Ear 2 support voice prompts. Automatically receive information through audio messages, like if there is an issue with the connection.
The Sony WF 1000XM4 too support voice prompts meaning the earbuds will notify you if the battery is running low, and you need to recharge them.
The Nothing Ear 2 come with their own special case. Carrying earphones openly, or putting them inside your pockets without a casing can easily put them at risk of getting damaged.
Sony WF 1000XM4 also have a travel bag included, which offers safe transportation.